Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Buying Used Weights: Price Per Pound Against New, and What to Check

Price used weights against new, per pound. On 1 Nov 2026, CAP Barbell's new Olympic cast iron plate packs cost $1.26 to $1.53 a pound. Our rule: used iron is worth the drive at least 30 percent under new, so under about $0.88 a pound for Olympic plates, and a good deal at half or less. Before you pay, check rust depth, count the plates against the listed total and roll the bar to test that it is straight.

Updated . By the BASALT editorial team.

We are building a store that sells new equipment, so you might expect this article to talk you out of buying used. It won't. Used iron is often the smartest purchase in home fitness. Cast iron does not wear out in any way that matters to you, and a 45 lb plate made in 1987 holds a barbell down exactly as well as one made last month. If you are building a home gym on a budget, checking Facebook Marketplace before you buy new is simply the correct move.

Tool

Appraise the listing before you drive

Type in the seller's numbers. You get the price per pound, where it sits against new prices from CAP Barbell checked 1 Nov 2026 and against our worth-the-drive rule, a verdict, and the three checks that matter for that category.

Example listing loaded. Edit any field.

For a set, use the total the listing claims. The plate count below checks it.

Plates you count in the photos

If a 300 lb set includes a 45 lb bar, that leaves 255 lb of plates. Leave 0 if no bar is in the pile.

The catch is that not everything on Marketplace is a deal, and not everything that is a deal is safe. Plates are usually a good used buy. Bars are riskier. Anything with a mechanism is riskier still. This guide covers how to price used weights against new, what to inspect before you pay, and what to walk away from.

Used weights price per pound: compare against new

Iron plates are sold by weight, so the fair way to compare a used listing against new is price per pound. We do not publish a survey of used prices: they vary by city and by week, and we have not collected them. What we can show is what new costs. On 1 Nov 2026 we priced one budget maker's own store, CAP Barbell, before tax; its site also advertised free economy shipping for a limited time that day.

CategoryNew at CAP Barbell, 1 Nov 2026Worth the drive used, our rule
Olympic (2 inch hole) iron plates$1.26 to $1.53/lb, plate packs from 285 lb down to 75 lbUnder $0.88/lb; a good deal under $0.63
Standard (1 inch hole) iron plates$1.80 to $2.24/lb, single plates and packsUnder $1.26/lb; a good deal under $0.90
Olympic bumper plates$1.04 to $1.50/lb, economy sets and pairsUnder $0.73/lb; a good deal under $0.52
Cast iron hex dumbbells$1.10 to $2.22/lb, single dumbbells from 10 to 50 lbUnder $0.77/lb; a good deal under $0.55
Basic 7 ft Olympic barbell$89.99 for CAP's 7 ft Olympic ECO Power Bar, rated 500 lb by CAPUnder $63; a good deal under $45, and only after it passes the roll and spin tests below

The used column is our rule, a judgment and not a market figure: a used listing is worth the drive when it is at least 30 percent under the low end of the new price per pound, and a good deal at half or less. Under 30 percent, the drive and the risk eat most of the saving. Two things follow. A seller asking $1.50 per pound for rusty Olympic plates is asking new prices, since CAP's packs ran $1.26 to $1.53. And 1 inch plates cost more per pound new than CAP's Olympic packs did that day, so check whether an Olympic bar and plates would cost you less overall. Run any listing through our price per pound calculator before you message anyone.

One more check before you shop: make sure you know whether you need 1 inch or 2 inch plates. Mixing them up is an easy mistake on Marketplace, and our Olympic vs standard barbell guide explains the difference.

What to inspect before you pay

Never buy weights sight unseen, and never skip the inspection because the seller seems nice. Here is what to check, in order.

  1. Rust: surface or deep? Surface rust is orange, dusty, and wipes or wire-brushes off. It is cosmetic and, honestly, a negotiating tool. Deep rust is different: dark pitting, flaking layers, or scaling you can catch a fingernail under. Pitted plates are still usable but should be priced accordingly. A deeply pitted bar is a pass, because pitting on the shaft destroys the knurl and can hide deeper corrosion where the sleeve meets the shaft.
  2. The roll test. Ask to roll the bar on a flat surface, a garage floor or driveway works. A straight bar rolls smoothly. A bent bar wobbles, hops, or rolls in a lazy arc. Even a slight bend is a dealbreaker: a bent bar loads your wrists and shoulders unevenly on every rep, and it cannot be fixed at home. Do not accept "it's fine, I've lifted with it for years." The full version of this test, and what a weight rating actually promises, is in will a cheap barbell bend.
  3. Sleeve spin. Grip the shaft and spin each sleeve by hand. It should rotate freely without grinding, clicking, or catching. Then pull and push each sleeve along its axis. A little play is normal on budget bars; a sleeve that clunks or shifts visibly means worn or missing internals.
  4. The cracked rubber test. For bumper plates and rubber-coated dumbbells, look for cracks radiating from the center insert, chunks missing from the edge, and inserts that wiggle in the rubber. A crack at the insert or a loose insert is a reason to pass, because every drop works on it.
  5. Mismatched and off-brand plates. A mixed pile is fine and often cheap, but check hole sizes on every plate (some piles mix 1 inch and 2 inch), and know that a stamped weight is not exact. Bells of Steel, one maker that publishes its numbers, states plus or minus 3 percent for its cast plates and plus or minus 1 percent for its machined 25 to 45 lb plates, and some budget listings, CAP's plate pack among them, state no tolerance at all. That matters less than people think for training, but price a pile you cannot check accordingly. That is also why BASALT publishes the weights it measured, with the date and the method: a stamped weight is a claim, not a measurement.
  6. Collars, benches, racks. Squeeze spring collars to check tension. On any bench or rack, look at every weld for cracks and check that the frame does not rock. Load-bearing steel with a visible crack is a hard no at any price.

The short version: plates are hard to ruin, so used plates are usually safe. Bars and anything with moving parts fail in ways you cannot always see, so hold them to a much higher standard.

Red flags in listings

Safe meetup basics

Picking up heavy iron at the seller's garage is normal enough, since nobody wants to load 300 lb twice. Take basic precautions.

What to never buy used

Some categories fail invisibly, and the failure mode involves weight over your body. Buy these new or not at all.

Where this leaves you

A reasonable strategy for most people: buy plates used when a genuine deal appears, and buy your bar and anything mechanical new. Plates carry almost no risk, and the savings are real. Bars carry your bodyweight worth of steel over your face, and mechanisms fail without warning. If you are not sure how much weight you actually need to start, our plate buying guide walks through it, and it may be less than you think.

And if you check Marketplace for a month and nothing good comes up, that is a normal outcome, not a failure. Set your price-per-pound ceiling, check a few times a week, and be ready to move when a fair one appears.

FAQ

Are rusty weights safe to use?

Surface rust is safe and purely cosmetic. Wire-brush it off, wipe the plates with a lightly oiled rag, and they will outlast you. Deep pitting on plates is still usable but should be cheap. Deep pitting on a bar shaft is a reason to walk away.

How much should I pay for used Olympic plates?

Price them against new. On 1 Nov 2026, CAP Barbell's new Olympic cast iron plate packs cost $1.26 to $1.53 per pound. By our rule, used iron plates are worth the drive under about $0.88 per pound and a good deal under about $0.63. Above that, compare the listing with new prices, shipping included, before you commit.

Is it safe to buy a used barbell?

Sometimes. Run the roll test for straightness, spin both sleeves, and check the shaft for pitting. A bar that passes all three is probably fine for light to moderate training. For heavy lifting, or if the bar has no identifiable brand or rating, buying new is the safer call.

Do mismatched plates from different brands matter?

For training, barely. As long as the hole size matches your bar and you load roughly equal weight per side, your muscles do not care about logos. Just know that a stamped weight is not exact: Bells of Steel, one maker that publishes a tolerance, allows its cast plates plus or minus 3 percent, so price a mixed pile below matched-set prices.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. CAP Olympic Cast Iron Plate Pack, up to 285 lb, CAP Barbell. Used for: New Olympic cast iron plate prices: $114.99 for 75 lb up to $359.99 for 285 lb, $1.26 to $1.53 a pound; no weight tolerance stated; the site's limited-time free economy shipping banner. Checked .
  2. CAP Standard Cast Iron Plate, Gray, CAP Barbell. Used for: New 1 inch plate prices, up to $2.24 a pound (12.5 lb plate at $27.99). Checked .
  3. CAP Standard Cast Iron Plate, 1 inch, CAP Barbell. Used for: New 1 inch plate prices, down to $1.80 a pound (a pair of 25 lb plates at $89.99). Checked .
  4. CAP Cast Iron Hex Dumbbell, Gray, CAP Barbell. Used for: New hex dumbbell prices: single dumbbells from 10 to 50 lb at $1.10 to $2.22 a pound. Checked .
  5. CAP Economy Olympic Bumper Plate Set, Speckled, CAP Barbell. Used for: New bumper plate prices, down to $1.04 a pound (sets from 100 to 370 lb). Checked .
  6. CAP Economy Bumper Plates, Speckled, CAP Barbell. Used for: New bumper plate prices, up to $1.50 a pound (a pair of 10 lb plates at $29.99). Checked .
  7. CAP Olympic ECO Power Barbell Bar, CAP Barbell. Used for: A new basic Olympic bar: the 7 ft (84 in) bar at $89.99, 35 lb, with a 500 lb weight capacity stated by CAP. Checked .
  8. CAP Standard Threaded Bar, 5 Feet, CAP Barbell. Used for: A new 1 inch bar at $69.99, for comparing a used 1 inch bar. Checked .
  9. Gray Mighty Grip Olympic Weight Plates, Bells of Steel. Used for: A maker's stated tolerance for cast iron plates: plus or minus 3 percent. Checked .
  10. Machined Iron Olympic Weight Plates, Bells of Steel. Used for: A maker's stated tolerance for machined plates: plus or minus 1 percent for 25 to 45 lb, 3 percent for 2.5 to 15 lb. Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.