Deadlift Bar vs Power Bar
A deadlift bar is a longer, thinner bar built to flex on the deadlift, while a power bar is shorter and stiffer and is made for the squat, bench press and deadlift. On the pages of four brands that sell both, each deadlift bar has a 27 mm shaft and no center knurl, and each power bar has a 28.5 or 29 mm shaft. Eight of the nine bars state 20 kg.
The nine bars below come from four brands that sell both types, and every bar figure is the brand's own, read on its pages on 19 Nov 2026. The conversions are ours. We measured none of these bars.
Deadlift bar vs power bar, brand by brand
| Bar | Length | Shaft | Weight | Loadable sleeve | Knurl | Stated tensile strength |
|---|---|---|---|---|---|---|
| Texas Power Bars | ||||||
| Texas Deadlift Bar | 92 1/2 in | 27 mm | 44 lb / 20 kg | 15 1/2 in | Aggressive, no center knurl | 190K |
| Texas Power Bar Original | 86 in | 28.5 mm | 45 lbs | 15 in | Aggressive, 4 in center knurl | 190K |
| Texas Power Bar PRO | 86.5 in | 29 mm | 20 kg / 44 lbs | 16 in | Aggressive or medium, center knurl | 200K+ |
| REP Fitness | ||||||
| Hades Deadlift Bar | 91.7 in | 27 mm | 20 kg (44.1 lbs) | 15.75 in | Deep Mountain/Very Aggressive, no center knurl | 190 ksi |
| Double Black Diamond Power Bar | 86.6 in | 29 mm | 20 kg (44.1 lbs) | 16.3 in | Deep Mountain/Very Aggressive, center knurl | 200 ksi |
| Strength Shop | ||||||
| Bastard Deadlift Bar | 2.3 m, about 90.6 in | 27 mm | 20 kg | 370 mm, about 14.6 in | Sharp, no centre knurling | 205K PSI |
| Bastard Power Bar, stainless steel | 2.2 m, about 86.6 in | 29 mm | 20 kg | 40.5 cm, about 15.9 in | Coarse, 15 cm centre knurling | 205K PSI |
| BullrocK Fitness | ||||||
| DireWolf Deadlift Bar, black | 2330 mm, about 91.7 in | 27 mm | 20 kg | 400 mm, about 15.7 in | 1.5 mm Volcano, no center knurl | 190,000 PSI |
| Sabertooth Bar, black hard chrome | 2200 mm, about 86.6 in | 29 mm | 20 kg | 415 mm, about 16.3 in | 1.5 mm, center knurl | 200,000 PSI |
The Texas Power Bars rows come from its product pages. Its compare page differs on three figures: it gives the Texas Deadlift Bar 18 in loadable sleeves, and the Original 16 in sleeves and 44 lbs / 20 kg. Rogue's Ohio Deadlift Bar and Ohio Power Bar pages refused our requests on 19 Nov 2026, so this page gives no Rogue figure.
What differs, and what does not
- Shaft diameter. All four deadlift bars state 27 mm. The five power bars state 28.5 mm (Texas Power Bar Original) or 29 mm.
- Length. Each deadlift bar is longer than the same brand's power bar: by 6 to 6 1/2 in at Texas Power Bars, 5.1 in at REP, 10 cm at Strength Shop and 130 mm at BullrocK.
- Where the extra length goes. At Texas Power Bars, mostly between the collars: it states 56 1/2 in inside collar to inside collar for its deadlift bar, against 52 in for the Original and 51 9/16 in for the PRO, while its product pages give the deadlift bar a 15 1/2 in loadable sleeve, between the Original's 15 in and the PRO's 16 in. REP, Strength Shop and BullrocK each state a shorter loadable sleeve on the deadlift bar than on the power bar, so their extra length is not plate space.
- Center knurl. None of the four deadlift bars has one; all five power bars do. Texas Power Bars' reason: "the bar contacts the shins and thighs during the lift."
- Tensile strength. Not the dividing line. Strength Shop states 205K PSI for both bars, and Texas Power Bars states 190K for both its deadlift bar and its Original. REP states 190 ksi for the deadlift bar and 200 ksi for the power bar, and BullrocK 190,000 PSI and 200,000 PSI.
Our barbell specs and coatings guide explains each spec.
What whip means, in the makers' words
Whip is the makers' word for how much a bar bends under load. Texas Power Bars: "A deadlift bar is longer (92.5") and thinner (27mm) than a standard power bar. This increases "whip" (flex), allowing you to pull the slack out of the bar before the full weight leaves the floor." REP says the Hades' thinner shaft and longer length allow "more flex under heavy loads", so the lifter pulls "from a slightly higher position as the weight leaves the ground".
Two brands put whip in the spec table as a word, not a measurement. REP rates the Hades "High" and the Double Black Diamond "Low". BullrocK rates the DireWolf "Great" and the Sabertooth "No". This page puts no number on how much more anyone lifts, and we tested none of it.
The same flex makes a deadlift bar a one lift bar. Texas Power Bars writes: "Due to the high flex, this bar is NOT recommended for squats or bench press." Whether a bar stays bent is a separate question, covered in our will a cheap barbell bend guide.
Deadlift bar vs stiff bar, and the weight
The "stiff bar" in this comparison is the power bar, going by the makers' own wording. Texas Power Bars labels its PRO "Stiff 29mm (Less whip than Original)", and REP writes that its power bar "has a stiff 29mm diameter".
A deadlift bar and a stiff bar weigh the same on these pages. Eight of the nine bars state 20 kg, which REP gives as 44.1 lbs and Texas Power Bars as 44 lb. The exception is the Texas Power Bar Original, at 45 lbs on its product page. So the plate math does not change: 20 kg plus a 20 kg plate on each side is 60 kg on either bar.
Which federations use which bar
We opened two rulebooks on 19 Nov 2026 and did not read any other federation's.
| Rule | IPF | USPA |
|---|---|---|
| Bar diameter | 28 to 29 mm | 27 to 32 mm |
| Overall length, at most | 2.2 m, about 86.6 in | 2.5 m, about 98.4 in; up to 2.6 m for 30 kg squat bars in Multi Ply events |
| Between collar faces | 1.31 to 1.32 m | 1.31 to 1.48 m |
| Bar and collars | 25 kg | 25 kg for the standard bar |
| Bars across the lifts | One specification "for all lifts" | "The correct bar for each lift" |
IPF. The rulebook has a single bar specification and says the bar "shall not be changed during the competition unless it is bent or damaged". By our reading of the dimensions, none of the four deadlift bars above fits it: each states 27 mm, under the 28 mm floor, and each is longer than 2.2 m.
USPA, and squat bar vs deadlift bar vs power bar. For the squat a USPA meet may use "a 20 kg power bar, 25 kg squat bar, or 30 kg squat bar (for Multi Ply events)". For the bench press, a power bar. For the deadlift, "a 20 kg deadlift-specific bar or a power bar may be used", and IPL World Record-sanctioned events, such as the USPA National Championships, must use a deadlift-specific bar. Meet directors must state which bar will be used. Texas Power Bars says its deadlift bar and PRO power bar are USPA and IPL approved; we did not check an approved list.
Who can skip a deadlift bar at home
- Anyone lifting with 1 inch plates. Both bar types take 2 inch plates: REP says its barbells work with Olympic plates with 2 inch center holes, and both rulebooks set the sleeve at 50 mm or more. The Signature Fitness 1 inch standard bars we sell are neither type. They weighed about 12.4 lb (5 ft), 14.5 lb (6 ft) and 17.9 lb (7 ft) on our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry, and we print no load rating for them.
- Anyone who does not compete. The makers sell a deadlift bar for heavy loads and for meets that use one. With no meet coming, no rule picks your bar.
- Anyone who wants one bar for everything. A deadlift bar is a second bar. Of the two, the power bar is the one sold for all three lifts: Strength Shop points deadlift bar buyers to its power bar "for other lifts".
- Anyone short on room. A 92 1/2 in bar is 8 1/2 in longer than 7 ft. Our barbell length guide shows how to measure a room and rack for a long bar.
If you do compete, train on the bar your meet uses: a 28 to 29 mm bar under IPF rules, and under USPA rules whichever bar the meet director has stated.
Short answers
What is the difference between a power bar and a deadlift bar?
A deadlift bar is thinner and longer, which its makers say lets it flex more, and it has no center knurl. On the four brands' pages we read, each deadlift bar has a 27 mm shaft and each power bar a 28.5 or 29 mm shaft with a center knurl.
Does a deadlift bar weigh the same as a stiff bar?
Yes, on the pages we read. Eight of the nine deadlift and power bars state 20 kg, about 44.1 lb; the Texas Power Bar Original's product page says 45 lbs.
How does the Texas Power Bar differ from the Texas Deadlift Bar?
The Texas Deadlift Bar is 92 1/2 in long with a 27 mm shaft and no center knurl. Texas Power Bars lists the Original at 86 in and 28.5 mm and the PRO at 86.5 in and 29 mm, both with a center knurl.
Can you use a deadlift bar in competition?
It depends on the federation. The USPA allows "a 20 kg deadlift-specific bar or a power bar" on the deadlift, while the IPF has one bar specification of 28 to 29 mm and at most 2.2 m for all lifts.
Related: how much does a barbell weigh, barbell specs and coatings, will a cheap barbell bend, the plate calculator, and the one rep max calculator.
Sources
We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.
- Texas Deadlift Bar product page, Texas Power Bars. Used for: Texas Deadlift Bar: 27 mm, 44 lb / 20 kg, 190K tensile, aggressive knurl, no center knurl, 92 1/2 in overall, 56 1/2 in inside collar to inside collar, 15 1/2 in loadable sleeve; the whip quote (longer 92.5 in and thinner 27mm than a standard power bar); the reason for no center knurl; 'NOT recommended for squats or bench press'; maker's statement that the bar is USPA and IPL approved; who the bar is for (USPA, IPL and deadlift-only meets).. Checked .
- Texas Power Bar Original product page, Texas Power Bars. Used for: Texas Power Bar Original: 28.5 mm, 45 lbs, 190K tensile, aggressive knurl, 4 in center knurl, 86 in overall, 52 in inside collar to inside collar, 15 in loadable sleeve.. Checked .
- Texas Power Bar PRO product page, Texas Power Bars. Used for: Texas Power Bar PRO: 29 mm, 20 kg / 44 lbs, 200K+ tensile, aggressive or medium knurl, center knurl, 86.5 in overall, 51 9/16 in inside collar to inside collar, 16 in loadable sleeve; the label 'Stiff 29mm (Less whip than Original)'; maker's statement that the PRO is USPA and IPL compliant.. Checked .
- Compare All Bars, Texas Power Bars. Used for: The compare page figures that differ from the product pages: Texas Deadlift Bar 18 in loadable sleeves; Texas Power Bar Original 44LBS / 20KG and 16 in loadable sleeves. Also the '*USPA & IPL Approved' line for the deadlift bar and the PRO.. Checked .
- Hades Deadlift Bar product page, REP Fitness. Used for: Hades Deadlift Bar: 20 kg (44.1 lbs), 91.7 in, 27 mm, 15.75 in loadable sleeve, Deep Mountain/Very Aggressive knurl, no center knurl, whip 'High', 190 ksi; 'more flex under heavy loads' and 'from a slightly higher position as the weight leaves the ground'; barbells work with Olympic plates with 2 inch center holes.. Checked .
- Double Black Diamond Power Bar product page, REP Fitness. Used for: Double Black Diamond Power Bar: 20 kg (44.1 lbs), 86.6 in, 29 mm, 16.3 in loadable sleeve, Deep Mountain/Very Aggressive knurl, center knurl, whip 'Low', 200 ksi; 'has a stiff 29mm diameter'.. Checked .
- Bastard Deadlift Bar product page, Strength Shop. Used for: Bastard Deadlift Bar: 20 kg, 2.3 m, 27 mm, 370 mm loadable sleeve, sharp knurling, no centre knurling, 205K PSI tensile; 'For other lifts, check out our Bastard Power Bar.'. Checked .
- Bastard Power Bar, Stainless Steel product page, Strength Shop. Used for: Bastard Power Bar, stainless steel: 20 kg, 2.2 m, 29 mm, 40.5 cm plate sleeve, coarse knurling, 15 cm centre knurling, 205K PSI tensile.. Checked .
- The DireWolf Deadlift Bar (20kg, 27mm, 2330mm) Black, Remastered, BullrocK Fitness. Used for: DireWolf Deadlift Bar, black: 20 kg, 2330 mm, 27 mm, 400 mm loadable sleeve, 1.5 mm Volcano knurl, no center knurl, 190,000 PSI, whip 'Great'.. Checked .
- The Sabertooth Bar (20kg, 29mm) Black Hard Chrome, Remastered, BullrocK Fitness. Used for: Sabertooth Bar, black hard chrome: 20 kg, 2200 mm, 29 mm, 415 mm loadable sleeve, 1.5 mm knurl, center knurl, 200,000 PSI, whip 'No'; filed under Powerlifting Barbells and described as a power barbell.. Checked .
- IPF Technical Rulebook, effective 01.03.2026, International Powerlifting Federation. Used for: IPF bar: overall length at most 2.2 m, 1.31 to 1.32 m between collar faces, 28 to 29 mm diameter, 25 kg with collars, sleeve 50 to 52 mm, collars 2.5 kg each; one specification 'for all lifts'; the bar 'shall not be changed during the competition unless it is bent or damaged'.. Checked .
- USPA Technical Rules, March 24, 2025 (2025v1), United States Powerlifting Association. Used for: USPA bar: overall length at most 2.5 m, with up to 2.6 m for 30 kg squat bars in Multi Ply events, 1.31 to 1.48 m between collar faces, 27 to 32 mm diameter, standard bar and collars 25 kg, sleeve 50 to 53 mm, collars 2.5 kg each; item 2.2.11 on which bar is used for the squat, bench press and deadlift, the deadlift-specific bar at IPL World Record-sanctioned events, and meet directors stating which bar will be used.. Checked .
- NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically, National Institute of Standards and Technology. Used for: The conversion factor behind every 'about' figure: 2.54 cm to the inch.. Checked .
- How we measure, BASALT. Used for: The Signature Fitness 1 inch bars we sell weighed about 12.4 lb (5 ft), 14.5 lb (6 ft) and 17.9 lb (7 ft): our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry.. Checked .