Barbell Plate Calculator
Subtract the bar and any collars from the target, halve the rest, and load each side from the heaviest plates you own. On a bar counted as 45 lb, one 45 lb plate on each side is 135 lb, two is 225, three is 315, four is 405 and five is 495. On a 20 kg bar with two 2.5 kg collars, 100 kg is 25, 10 and 2.5 kg per side. The calculator also handles 1 inch bars.
Enter a target and pick your bar. The calculator counts the bar and any collars, searches every way your own plates can make each side, and tells you which pair to buy when they fall short. It works for 1 inch standard bars and 2 inch Olympic bars, with plates marked in lb or kg, and for our three bars it checks on paper whether the plates fit on the sleeve.
Our three bars' weights and plate space are from our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Weigh your own bar for the real total.
Your plates are marked in Plates you own (pairs) Does the bar count Quick loads, lbEach side: 45 lb. On the bar: 135 lb (61.2 kg), bar included.
How it works
The calculator takes the bar, and the collars if you count them, off the target and halves the rest: that is the load for each side. Then it searches every combination of the plates you own for the heaviest side at or under that load, so it finds 25 plus 25 for a 50 lb side when you own one 45 and two 25s, where filling from the heaviest plate down would stop at 45. If your plates cannot reach the target but the full plate set could, it names the lightest single pair that closes the gap, or the pairs that cover all of it. If the gap left is under one pair of the smallest plate in the set, nothing you add closes it, and it says so.
The plate menus follow what makers and federations list. For 1 inch bars in lb, the weights CAP Barbell sells in 1 inch plates, 1.25 to 50 lb. For Olympic bars in lb, the plates in CAP's 300 lb Olympic set, 2.5 to 45 lb. For kg, the IPF's competition discs, 1.25 to 25 kg. Set any count to zero for plates you do not have. Bar weight matters more than most people expect, so weigh your own bar if you can: how to weigh your weights shows the two-end method.
Worked examples
A 225 lb load on an Olympic bar. On a bar counted as 45 lb, the round figure US gyms use for the 20 kg men's bar, 225 minus 45 leaves 180 lb of plates, 90 lb a side. With two pairs of 45s: Each side: 2 x 45 lb. On the bar: 225 lb (102.1 kg), bar included. In the plate math table below, that is the two plates row.
100 lb on our 6 ft 1 inch bar. It weighed about 14.5 lb on our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. 100 minus 14.5 leaves 85.5 lb, or 42.75 lb a side. The smallest 1 inch plate CAP sells is 1.25 lb, so a side can only go up in 1.25 lb steps, and the closest side at or under 42.75 is 42.5 lb. With a pair of 25s, two pairs each of 10s, 5s, 2.5s and 1.25s: Each side: 25 lb, 10 lb, 5 lb, 2.5 lb. On the bar: 99.5 lb (45.1 kg), bar included. The last 0.5 lb is less than one pair of the smallest plate in the set, so 99.5 lb is the closest load under the target.
Sleeve room, on paper: 25 + 10 + 5 + 2.5 lb in York Flat Pro plates take 3 3/8 in of the 13 1/8 in of plate space per side on our 6 ft bar, less 1/16 in for our tape: 9 11/16 in to spare before an outer collar. Sleeve room, on paper: 25 + 10 + 5 + 2.5 lb in York Contour plates take 4 1/4 in of the 13 1/8 in of plate space per side on our 6 ft bar, less 1/16 in for our tape: 8 13/16 in to spare before an outer collar.
100 kg with competition collars. IPF rules put the bar and collars at 25 kg: a 20 kg bar and two 2.5 kg collars. 100 kg minus 25 leaves 75 kg of plates, 37.5 kg a side: Each side: 25 kg, 10 kg, 2.5 kg. On the bar: 100 kg (220.5 lb), bar and collars included.
Common loads on a 45 lb Olympic bar
Tap a load to send it to the calculator. Each side assumes a bar counted as 45 lb and enough pairs of each plate in CAP's 300 lb set.
| Total | Each side | Calculator |
|---|---|---|
| 95 lb | 25 lb | |
| 135 lb | 45 lb | |
| 185 lb | 45 lb, 25 lb | |
| 225 lb | 2 x 45 lb | |
| 315 lb | 3 x 45 lb | |
| 405 lb | 4 x 45 lb |
Plate math: how much is 1, 2, 3, 4 or 5 plates on each side
These tables take "a plate" to mean one 45 lb plate on each side of the bar, or one 20 or 25 kg plate where the plates are in kilos. A count only gives a total once you know the plate and the bar. On a bar counted as 45 lb, one 45 lb plate on each side is 135 lb, two is 225, three is 315, four is 405 and five is 495. In kilos, 20 kg plates on a 20 kg bar give 60 kg for one a side and 100 kg for two, and both five 20 kg plates a side and four 25 kg plates a side come to 220 kg. The last column counts the two 2.5 kg collars the IPF's rules add in competition, which is why one 25 kg plate a side reads 75 kg there.
| Plates on each side | 45 lb plates, 45 lb bar | 20 kg plates, 20 kg bar | 25 kg plates, 20 kg bar | 25 kg plates, 20 kg bar, collars |
|---|---|---|---|---|
| 1 | 135 lb | 60 kg | 70 kg | 75 kg |
| 2 | 225 lb | 100 kg | 120 kg | 125 kg |
| 3 | 315 lb | 140 kg | 170 kg | 175 kg |
| 4 | 405 lb | 180 kg | 220 kg | 225 kg |
| 5 | 495 lb | 220 kg | 270 kg | 275 kg |
| 6 | 585 lb | 260 kg | 320 kg | 325 kg |
A count can also name the smaller plate that goes on after the big ones: a plate and a 25 here means one 45 and one 25 on each side, 185 lb, and a plate and a 10 is 155 lb. The table uses the smaller plates in CAP's 300 lb Olympic set. A load that needs two small plates is not in it. 345 lb is three 45 lb plates, a 10 and a 5 on each side of a bar counted as 45 lb. The calculator above works out any other load, but only from the pairs you tell it you own: set the count of 45s to at least the number of plates a side you want to see.
| 45 lb plates a side, 45 lb bar | and a 2.5 lb | and a 5 lb | and a 10 lb | and a 25 lb | and a 35 lb |
|---|---|---|---|---|---|
| 1 | 140 lb | 145 lb | 155 lb | 185 lb | 205 lb |
| 2 | 230 lb | 235 lb | 245 lb | 275 lb | 295 lb |
| 3 | 320 lb | 325 lb | 335 lb | 365 lb | 385 lb |
| 4 | 410 lb | 415 lb | 425 lb | 455 lb | 475 lb |
These totals count the bar as 45 lb. The men's Olympic bar is 20 kg, about 44.1 lb, so on a kilo-marked bar the true figures run about a pound lighter, and they only hold if your bar and plates weigh what they say: see Limits. None of this is for a 1 inch bar. The 1 inch bars in the bar weight table below weigh far less than 45 lb, and CAP's 1 inch plates run to 50 lb with no 45 among them, so pick your bar in the calculator instead of counting plates.
Will the plates fit on the sleeve
Every bar has a set length of sleeve for plates, and plate thickness varies by brand. When you pick one of our three bars with lb plates, the calculator adds up the thickness of each side's plates as York Barbell lists them, in its thin Flat Pro line or its thicker Contour line, and compares the stack with the bar's measured plate space per side, less 1/16 in for our tape's precision. That is the same method as our 5 ft vs 6 ft vs 7 ft guide, which counts up to about 12, 17 and 20 of York's 3/4 in Flat Pro 5 lb plates per side on the 5, 6 and 7 ft, on paper, before an outer collar. York lists no thickness for some weights, such as 12.5 lb, so the check says when it cannot tell instead of guessing.
Limits
Labels, not weights. The calculator adds up the numbers printed on your bar and plates. Cast iron often weighs a little more or less than its label, so if the exact load matters, weigh your gear: are weight plates accurate explains how far off they tend to be.
Preset bar weights. The Olympic presets are the federations' bar weights and one maker's listing, and our three bars are a preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Your bar may differ; use the bar weight box for the figure you weighed.
The sleeve check is on paper. We have not test-fitted York plates on our bars, your plates may be thicker or thinner than York's, and an outer collar needs room of its own.
Room on the sleeve is not strength. We print no weight rating for our bars because we have not verified one. Check the rating of any bar before you load it, and lock every plate with a collar.
Barbell weight reference
| Bar | Weight | Sleeve |
|---|---|---|
| Olympic bar counted as 45 lb | 45 lb (20.4 kg) | 2 inch |
| Olympic men's bar, 20 kg | 20 kg (44.1 lb) | 2 inch |
| Olympic women's bar, 15 kg | 15 kg (33.1 lb) | 2 inch |
| 7 ft Olympic bar listed at 35 lb | 35 lb (15.9 kg) | 2 inch |
| Signature Fitness 5 ft 1 inch bar | about 12.4 lb (5.6 kg) | 1 inch |
| Signature Fitness 6 ft 1 inch bar | about 14.5 lb (6.6 kg) | 1 inch |
| Signature Fitness 7 ft 1 inch bar | about 17.9 lb (8.1 kg) | 1 inch |
The 20 and 15 kg bars are the IWF's men's and women's competition bars, and 45 lb is how US gyms count the 20 kg bar. The 35 lb bar is CAP's 7 ft ECO Power bar as CAP lists it. The Signature Fitness figures are the bars we sell, from our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry; see the 5 ft, 6 ft and 7 ft bar pages. On a Smith machine, what you lift with no plates on is the machine's starting weight, which is not always the weight of its bar: Smith machine bar weight lists what makers publish for 28 models, 21 of them with a figure. To count yours, pick Another Olympic bar or Another 1 inch bar in the Bar menu to match the sleeves, then enter the figure as the bar's weight, in your plates' unit.
The short answers
How much does a barbell weigh?
An Olympic men's bar is 20 kg, about 44.1 lb, which US gyms count as 45 lb, and a women's bar is 15 kg, about 33.1 lb. 1 inch standard bars weigh far less: the three we sell weighed about 12.4 lb (5 ft), 14.5 lb (6 ft) and 17.9 lb (7 ft) on our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry.
How do I load 225 on a barbell?
With a 45 lb Olympic bar, 225 is two 45 lb plates per side. With a 15 lb standard bar you would need 105 lb per side, which most standard sets cannot reach.
How much is two plates on each side?
225 lb: a bar counted as 45 lb with two 45 lb plates on each side. One plate a side is 135 lb, three is 315, four is 405 and five is 495. With 20 kg plates on a 20 kg bar, two a side is 100 kg.
How many plates is 135?
135 lb is one 45 lb plate on each side, two plates in all, on a bar counted as 45 lb. A total between whole plates takes smaller plates as well: 345 lb is three 45 lb plates, a 10 and a 5 on each side.
How many plates is 220?
220 kg is five 20 kg plates on each side of a 20 kg bar, or four 25 kg plates. 220 lb is not a whole count of 45 lb plates: on a bar counted as 45 lb, each side takes 45 lb, 35 lb, 5 lb, 2.5 lb.
How much is a plate and a 25?
185 lb, counting a plate as a 45: one 45 lb plate and one 25 lb plate on each side of a bar counted as 45 lb, on the bench or any other lift. Two plates and a 25 is 275 lb.
Do you count the bar weight?
Yes. The total weight lifted includes the bar, and collars if you use them. This calculator counts the bar by default; switch to plates only if you just want the plate math.
What plates should a beginner buy first?
Start with a pair of 10s and a pair of 5s, then a pair of 2.5s for 5 lb jumps, then a pair of 25s. Add 45s once your squat or deadlift is ready for them.
From plates to a program
Working from percentages of your max? The one rep max calculator rounds every training weight to a load you can make and links each one back here. Before you buy plates, 1 inch vs 2 inch bars and plates makes sure they fit your bar, and what plates do I need sizes a starter set. We sell Signature Fitness 1 inch bars in 5, 6 and 7 ft lengths; pick yours in the bar menu above to load it with its measured weight and see how much sleeve your plates use.
Sources
We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.
- CAP Standard Cast Iron Plate, 1 inch, CAP Barbell. Used for: The 1 inch plate menu: CAP sells 1 inch plates of 1.25, 2.5, 5, 7.5, 10, 12.5, 25 and 50 lb. Checked .
- CAP 300-lb Olympic Barbell Set, CAP Barbell. Used for: The Olympic lb plate menu: the set's 45, 35, 25, 10, 5 and 2.5 lb plates. Checked .
- IPF Technical Rulebook, effective 1 March 2026, bars, discs and collars (pages 8 and 9), International Powerlifting Federation. Used for: The kg plate menu, competition discs from 1.25 to 25 kg; collars of 2.5 kg each; bar and collars together 25 kg. Checked .
- IWF Technical and Competition Rules and Regulations 2024, men's and women's bars (pages 47 and 48), copy hosted by the Polish Weightlifting Federation, International Weightlifting Federation. Used for: The men's Olympic bar is 20 kg and the women's 15 kg. Checked .
- CAP Olympic ECO Power Barbell Bar, CAP Barbell. Used for: A 7 ft Olympic bar listed at 35 lb. Checked .
- 1" Standard Flat Pro Cast Iron Plate, York Barbell. Used for: Listed thickness of York's thin 1 inch plates: 1/2 in for 1.25 lb, 5/8 in for 2.5 lb, 3/4 in for 5 and 7.5 lb, 7/8 in for 10 lb, 1 1/8 in for 25 lb, 1 1/4 in for 50 lb. Checked .
- 1" Standard Contour Cast Iron Plate, York Barbell. Used for: Listed thickness of York's thicker 1 inch plates: 7/8 in for 2.5 lb, 1 in for 5 and 10 lb, 1 3/8 in for 25 lb, 1 1/2 in for 35 lb, 1 3/4 in for 50 lb. Checked .
- NIST Handbook 44, 2026, Appendix B: Units and Systems of Measurement, National Institute of Standards and Technology. Used for: 1 lb is exactly 0.45359237 kg, so 20 kg is about 44.1 lb and every total shows in both units. Checked .
- How we measure, BASALT. Used for: Our three bars' weights, about 12.4, 14.5 and 17.9 lb, and plate space per side, 9 1/16, 13 1/8 and 15 1/8 in, a preliminary check of 2 Oct 2026. Checked .