Available on eBay Buy on eBay Pick 5 ft on the eBay listing.
Signature Fitness 5 ft Standard Barbell, 1 Inch
The Signature Fitness 5 ft standard barbell is a 1 inch bar for 1 inch plates only. It is not an Olympic bar, and 2 inch plates and bumpers do not fit it. Ours measured 60 in long and about 12.4 lb, with 9 1/16 in of plate space per side: our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. It suits small rooms, curls, presses and bench work, not heavy squats.
Drag to turn it, pinch or scroll to zoom. This is a render drawn to the nominal 60 inch length, not a photo and not a measurement. Photos of a real unit replace it after our full measurement session. On a phone with AR, the room view shows the model at full size, so leave a little margin when you check the fit.


The short bar. At 60 in end to end it fits rooms where a longer bar hits a wall, and at about 12.4 lb it is the lightest of the three. It takes 1 inch plates only. It is not an Olympic bar, and 2 inch plates and bumpers do not fit it.
Our figures: 60 in long, about 12.4 lb, 9 1/16 in of plate space per side. Source: our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry.
Skip this bar if you plan to squat or deadlift heavy within a year. Start with a 2 inch Olympic bar instead; the olympic vs standard guide explains why. If a low-priced listing elsewhere calls a bar Olympic, our guide to whether a cheap Olympic barbell is really Olympic lists what to check before you buy.
Specifications
| Maker | Signature Fitness |
|---|---|
| Sold by | BASALT (Basalt Fitness LLC) |
| SKU | SF-BAR-5FT |
| Bar standard | 1 inch class standard, for 1 inch plates. Not Olympic: 2 inch plates and bumpers do not fit. |
| Length, end to end | 60 in, by tape. Preliminary check |
| Nominal length | 5 ft (60 in) |
| Weight | about 12.4 lb, one bathroom scale reading. Preliminary check |
| Plate space per side | 9 1/16 in, from the fixed collar to the bar end, by tape. Preliminary check |
| Between the collars | about 41 7/8 in, derived: the length minus both plate spaces, so it runs to the collars' outer faces. Preliminary check |
| Gap inside the collars | Pending |
| Sleeve diameter | Pending, calipers |
| Sleeve threads | Pending |
| Knurl | Pending |
| Plate and collar fit | Pending our fit test with a 1 inch plate and an outer collar |
| Weight rating | Not printed. We have not verified a rating for this bar. |
| Finish | Chrome |
| Collars | Two fixed inner collars. Outer collars are not included. |
| In the box | The bar only |
| How to buy | Our eBay listing, item 137803029727. Checkout on this site opens later. |
About the 5 ft bar
Where it fits
Floor space is the reason to pick the 5 ft. The bar is 60 in long, and you need room to stand at it and slide plates on, so plan on about 7 ft of clear floor across its length. A spare bedroom, an apartment corner or the gap beside a bed is often enough. It stores on its end in a closet or flat under a bed.
Rack fit
The 5 ft is a floor and bench bar. Its collars sit about 41 7/8 in apart at their outer faces, a figure derived from the length and plate space, and the usable gap inside them is a little less and still pending. That gap has to be wider than the outside of your uprights. A rack or stand built for a 7 ft bar is too wide for it. If you own narrow stands, measure them outside to outside and leave margin before you count on racking it.
Plate space
Each sleeve gives you 9 1/16 in from the fixed collar to the end of the bar. That holds a modest stack of 1 inch plates plus an outer collar. How many plates fit depends on how thick yours are, so measure your stack before you buy more.
What it is good for
Curls, overhead presses, bent-over rows, presses on a flat bench, lunges and light floor work. The short bar is easy to control in a tight room, and the low weight suits a newer lifter. It is a poor choice for heavy squats or deadlifts: the sleeves are short, it will not rack in most setups, and we print no weight rating for it.
How it compares
Against the 6 ft, you give up about 4 in of plate space per side and about 2 lb of bar weight, and you save almost 11 in of length. If the 6 ft fits your room, it is the more flexible bar. If it does not, the 5 ft is the one that works.
Which length
| Signature Fitness 1 inch standard bar | 5 ft | 6 ft | 7 ft |
|---|---|---|---|
| Length, end to end | 60 in | 70 15/16 in | 84 in |
| Weight | about 12.4 lb | about 14.5 lb | about 17.9 lb |
| Plate space per side | 9 1/16 in | 13 1/8 in | 15 1/8 in |
| Between the collars, outer faces, derived | about 41 7/8 in | about 44 11/16 in | about 53 3/4 in |
| Best for | Small rooms, curls, presses, bench work | Most first setups, benches, apartment corners | Racks, wide stands, the most plate space |
All three are sold as 1 inch class standard bars, made for 1 inch plates. They do not take 2 inch Olympic plates or bumpers; the standard versus Olympic guide shows how to tell in sixty seconds. To check a length against your room or rack, use the length guide, and see how much a barbell weighs for every other bar type. For the three lengths compared step by step, with plates per side counted on paper, see 5ft vs 6ft vs 7ft barbell.
Questions about the 5 ft bar
Is the 5 ft bar an Olympic bar?
No. It is a 1 inch class standard bar, made for 1 inch plates. 2 inch Olympic plates and bumper plates do not fit it. Not sure what your plates are? Hold a US quarter against the center hole: a 1 inch hole is about the width of the coin, and a 2 inch hole is about two coins wide.
How much does the 5 ft bar weigh?
About 12.4 lb. That is one reading on a bathroom scale, by subtraction, on 2 October 2026, so treat it as close, not exact. It is our preliminary check, not a Ledger entry.
How long is the 5 ft bar?
60 in end to end, by tape, the same as its nominal length.
How many plates fit on each side?
Each sleeve has 9 1/16 in from the fixed collar to the end of the bar, and an outer collar takes some of that. How many plates fit depends on how thick your plates are, which varies by brand. Stack yours and measure the stack.
Will the 5 ft bar fit my rack?
Measure across the outside of your uprights. The collars on this bar sit about 41 7/8 in apart at their outer faces, a figure we derived from the length and the plate space, and the usable gap inside them is a little less and still pending. Your uprights need to be clearly narrower than that. A rack or stand built for a 7 ft bar is too wide for it.
What comes with it?
The bar only. Its two inner collars are fixed to the bar. Plates and outer collars are not included, and which outer collars grip this sleeve is pending our fit test.
What is its weight rating?
We do not print one on this site, because we have not verified a rating for this bar. Some of the maker's images on the eBay listing show the maker's own figures, including a capacity; those are the maker's claims, not our measurements. If you expect to squat or deadlift heavy within a year, start with a 2 inch Olympic bar instead. For what other makers publish, see how much weight a 1 inch barbell can hold.
How do I buy it?
Through our eBay listing, item 137803029727, where you pick 5, 6 or 7 ft. eBay handles payment, and the listing shows the current price, shipping and return terms. Checkout on this site opens later.
More answers, and a checker that tells you whether your plates fit your bar, are on the FAQ.
Read before you buy
- Is a 1 inch barbell worth it? Limits and rack fit
- Barbell length: will it fit your room or rack
- Olympic vs standard barbell: 1 inch vs 2 inch
- What weight plates do I need to start
- Barbell specs and coatings, explained
Before you load any bar
Lock every plate with a collar, every set. A 1 inch standard bar is built for light to moderate loads, and we print no weight rating for this one, so keep heavy squats and deadlifts for a 2 inch Olympic bar. Roll the bar on a flat floor before each session; if it wobbles, it is bent, and a bent bar gets retired, not loaded.
Returns and the guarantee
Orders placed on eBay follow the return terms on the eBay listing and eBay's own buyer protection. Our 2 percent make-it-right guarantee applies to items with a published Ledger entry, and these bars do not have one yet. Shipping and returns.