Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Gym Flooring Calculator

To find how much gym flooring a room needs, divide the room's length by the piece's length and its width by the piece's width, round each up, and multiply. A 12 by 12 ft room takes 6 stall mats at a full 4 by 6 ft, or 36 tiles at 2 by 2 ft. Turning the piece can change the count: a 12 by 8 ft room takes 4 mats one way and 6 the other.

Updated . By the BASALT editorial team.

Enter the room's length and width and pick a flooring piece. The calculator counts the pieces with the piece laid both ways round, writes out the division for each direction, and says how many pieces are cut, how much flooring you buy and how much is left over. Sizes and weights of named products are the makers' own figures, read on 20 Nov 2026. The counting method is ours, and this page says what it leaves out.

Measure the room in
Room length
ftin
Room width
ftin

Counted at the nominal 6 ft by 4 ft. A maker's stated size can be smaller, so pick the maker's product if it is listed, or enter the size on the label as a custom piece.

The price is your own number from a listing or a store shelf. We print no prices on this page.

Flooring for 12 ft by 12 ft6 mats

A 12 ft by 12 ft room takes 6 mats of 6 ft by 4 ft: 2 along the length by 3 along the width, none of them cut. Turned the other way the count is the same.

LayoutAlong the lengthAlong the widthMatsWholeCutLeft over
6 ft side along the length12 ft / 6 ft = 212 ft / 4 ft = 32 x 3 = 62 x 3 = 600 sq ft
6 ft side along the width12 ft / 4 ft = 312 ft / 6 ft = 23 x 2 = 63 x 2 = 600 sq ft

The floor is 144 sq ft. Bought: 6 mats, 144 sq ft. Left over: 0 sq ft.

The highlighted row is the layout with fewer pieces. A cut piece counts as a whole piece, because you still have to buy it, and no offcut is used twice. This calculator does not say what thickness to buy. See the limits before you order.

Worked examples: mats, tiles and rolls

A room that divides evenly. Take a 12 ft by 12 ft room and a stall mat at its full nominal 4 ft by 6 ft. This is the question behind "how many 4x6 mats do I need for a 12x12 stall". Here is the arithmetic for both ways of laying the mat.

  1. Floor to cover: 12 ft by 12 ft = 144 sq ft.
  2. 6 ft side along the length: 12 ft / 6 ft = 2 along the length, and 12 ft / 4 ft = 3 along the width. 2 x 3 = 6 mats. Whole: 2 x 3 = 6. Cut: 6 - 6 = 0. Bought: 144 sq ft. Left over: 144 sq ft - 144 sq ft = 0 sq ft.
  3. 6 ft side along the width: 12 ft / 4 ft = 3 along the length, and 12 ft / 6 ft = 2 along the width. 3 x 2 = 6 mats. Whole: 3 x 2 = 6. Cut: 6 - 6 = 0. Bought: 144 sq ft. Left over: 144 sq ft - 144 sq ft = 0 sq ft.

A 12 ft by 12 ft room takes 6 mats of 6 ft by 4 ft: 2 along the length by 3 along the width, none of them cut. Turned the other way the count is the same. The answer is 6 mats with no cuts and nothing left over.

Turning the piece changes the count. In a 12 ft by 8 ft room the same mat gives two different answers. A 12 ft by 8 ft room takes 4 mats of 6 ft by 4 ft: 2 along the length by 2 along the width, none of them cut. Turned the other way it takes 6. The second layout needs 3 cut mats and 6 in all, against 4 for the first, so the direction you lay the long side matters.

LayoutAlong the lengthAlong the widthMatsWholeCutLeft over
6 ft side along the length12 ft / 6 ft = 28 ft / 4 ft = 22 x 2 = 42 x 2 = 400 sq ft
6 ft side along the width12 ft / 4 ft = 38 ft / 6 ft = 1.33, so 23 x 2 = 63 x 1 = 3348 sq ft

Cuts in both directions. A 10 ft by 10 ft room divides evenly by neither side of the mat. A 10 ft by 10 ft room takes 6 mats of 6 ft by 4 ft: 2 along the length by 3 along the width, 4 of them cut. Turned the other way the count is the same. Only 2 of the 6 stay whole and 4 are cut. The floor is 100 sq ft. Bought: 6 mats, 144 sq ft. Left over: 44 sq ft. By area alone the fewest any layout could use is 5. Getting below 6 means fitting offcuts into gaps, which this count does not do. Our horse stall mat guide lays this same room with 5 mats: four whole in a pinwheel, and a 2 ft square cut from the fifth for the middle. That is a layout drawn by hand for one room, and it is the kind of saving this calculator does not look for.

LayoutAlong the lengthAlong the widthMatsWholeCutLeft over
6 ft side along the length10 ft / 6 ft = 1.67, so 210 ft / 4 ft = 2.50, so 32 x 3 = 61 x 2 = 2444 sq ft
6 ft side along the width10 ft / 4 ft = 2.50, so 310 ft / 6 ft = 1.67, so 23 x 2 = 62 x 1 = 2444 sq ft

A maker's stated size instead of the nominal one. A mat sold as 4 by 6 is not always 48 by 72 inches. SurfaceCo's page for Humane's stall mat says each mat is trimmed to 71 by 47 inches. Counted at that size: A 12 ft by 12 ft room takes 12 mats of 71 in by 47 in: 3 along the length by 4 along the width, 6 of them cut. Turned the other way the count is the same. The floor is 144 sq ft. Bought: 12 mats, 278.08 sq ft. Left over: 134.08 sq ft. By area alone the fewest any layout could use is 7. Getting below 12 means fitting offcuts into gaps, which this count does not do. The cut pieces cover only a thin strip: 6 whole mats would leave 2 in along the length and 3 in along the width bare. Humane (SurfaceCo) states about 94 lb a mat, so 12 mats weigh about 1128 lb. So the honest answer for this mat in this room has two parts: 6 whole mats cover all but a strip of 2 in one way and 3 in the other, and covering those strips with full mats would take 12.

LayoutAlong the lengthAlong the widthMatsWholeCutLeft over
71 in side along the length144 in / 71 in = 2.03, so 3144 in / 47 in = 3.06, so 43 x 4 = 122 x 3 = 66134.08 sq ft
71 in side along the width144 in / 47 in = 3.06, so 4144 in / 71 in = 2.03, so 34 x 3 = 123 x 2 = 66134.08 sq ft

Tiles. With a tile at a full 2 ft by 2 ft: A 12 ft by 12 ft room takes 36 tiles of 2 ft by 2 ft: 6 along the length by 6 along the width, none of them cut. Ecore's Fit Collection interlocking tile is stated as 23 by 23 inches, and Ecore's technical manual tells the installer to leave 1/4 inch around the perimeter for expansion in a wall to wall layout. Pick that tile, tick its gap box, and the count is no longer 36: A 12 ft by 12 ft room takes 49 tiles of 23 in by 23 in: 7 along the length by 7 along the width, 13 of them cut. Counted with Ecore's 1/4 in left at each wall, so the floor to cover is 143 1/2 in by 143 1/2 in. The floor is 143 sq ft. Bought: 49 tiles, 180.01 sq ft. Left over: 37.01 sq ft. By area alone the fewest any layout could use is 39. Getting below 49 means fitting offcuts into gaps, which this count does not do. The cut pieces cover only a thin strip: 36 whole tiles would leave 5 1/2 in along the length and 5 1/2 in along the width bare. Ecore's page states no weight for this tile, so no total weight is given. Without the gap the same tile also takes 49, because the room is still not a whole number of 23 inch tiles.

LayoutAlong the lengthAlong the widthTilesWholeCutLeft over
Square piece143 1/2 in / 23 in = 6.24, so 7143 1/2 in / 23 in = 6.24, so 77 x 7 = 496 x 6 = 361337.01 sq ft

Rolls. A roll is counted as full width strips. For a 12 ft by 10 ft room and a 4 ft wide roll cut to length:

  1. Floor to cover: 12 ft by 10 ft = 120 sq ft.
  2. Strips run along the length: across the room, 10 ft / 4 ft = 2.50, so 3 strips. Each is 12 ft long: 3 x 12 ft = 36 linear ft. The last strip is cut lengthwise to 2 ft wide. Bought: 144 sq ft. Left over: 144 sq ft - 120 sq ft = 24 sq ft.
  3. Strips run along the width: across the room, 12 ft / 4 ft = 3 strips. Each is 10 ft long: 3 x 10 ft = 30 linear ft. No strip is cut lengthwise. Bought: 120 sq ft. Left over: 120 sq ft - 120 sq ft = 0 sq ft.

A 12 ft by 10 ft room takes 3 strips of 4 ft wide roll, each 10 ft long, run along the width: 30 linear ft in all. No strip is cut lengthwise. Run along the length it takes 36 linear ft. If the roll comes in fixed lengths, enter the length of one roll. With Ecore's standard 25 ft roll: A 12 ft by 10 ft room takes 3 strips of 4 ft wide roll, each 10 ft long, run along the width: 30 linear ft in all. No strip is cut lengthwise. A 25 ft roll gives 2 full strips, so buy 2 rolls.

Total weight from a maker's figure. Pick a maker's product and the calculator multiplies the count by that maker's stated weight. For the first room with the Rubber-Cal Horse Stall Mat, 3/4 in: The floor is 144 sq ft. Bought: 6 mats, 144 sq ft. Left over: 0 sq ft. Rubber-Cal states 90 lb a mat, so 6 mats weigh about 540 lb.

In metres. Switch to metres and enter the room as decimals. For a 4 m by 3 m room and a 2 ft tile, which is 0.6096 m at 25.4 mm to the inch: A 4 m by 3 m room takes 35 tiles of 0.6096 m by 0.6096 m: 7 along the length by 5 along the width, 11 of them cut.

LayoutAlong the lengthAlong the widthTilesWholeCutLeft over
Square piece4 m / 0.6096 m = 6.56, so 73 m / 0.6096 m = 4.92, so 57 x 5 = 356 x 4 = 24111.01 sq m

A space smaller than one piece. For a 5 ft by 3 ft corner and a 4 ft by 6 ft mat: A 5 ft by 3 ft room takes 1 mat of 6 ft by 4 ft: 1 along the length by 1 along the width, and it is cut. Turned the other way it takes 2. A piece you cut down is still a piece you buy.

Spare. Type a percentage in the spare box and the calculator adds that share of the count, rounded up. For the 10 ft by 10 ft room, 10 percent spare on 6 mats is 1 more, 7 in all. The percentage is your call. We found no figure for it on the makers' pages we read.

How much gym flooring common rooms need

Each row is a room and each column a piece at its nominal size. Mat and tile cells give the count for the better of the two layouts and how many of those pieces are cut. Roll cells give the linear feet of roll and the number of strips, for strips run the way that needs less roll.

RoomArea4 ft by 6 ft stall mat2 ft by 2 ft tile4 ft wide roll
8 x 8 ft64 sq ft4, 2 cut16, no cuts16 linear ft, 2 strips
8 x 10 ft80 sq ft4, 2 cut20, no cuts20 linear ft, 2 strips
8 x 12 ft96 sq ft4, no cuts24, no cuts24 linear ft, 3 strips
10 x 10 ft100 sq ft6, 4 cut25, no cuts30 linear ft, 3 strips
10 x 12 ft120 sq ft6, 2 cut30, no cuts30 linear ft, 3 strips
12 x 12 ft144 sq ft6, no cuts36, no cuts36 linear ft, 3 strips
12 x 16 ft192 sq ft8, no cuts48, no cuts48 linear ft, 4 strips
10 x 20 ft200 sq ft10, 5 cut50, no cuts50 linear ft, 5 strips
20 x 20 ft400 sq ft20, 5 cut100, no cuts100 linear ft, 5 strips

These are grid counts for a bare rectangle, with no offcut used twice. Where the other half of a cut mat can fill the next gap, a room takes fewer mats. By area alone the 8 x 8 ft room needs 3, and the 10 x 10 ft and 10 x 12 ft rooms need 5. Our horse stall mat guide gives a hand layout for each of the three. A real room has a doorway and may have a post or a closet, and the makers' pieces are not always their nominal size, so use the calculator with your own measurements before you order.

Sizes and weights, as each maker states them

The menu holds 15 products from 5 makers and brands: Rubber-Cal, Humane, North West Rubber, Regupol and Ecore. Every size, thickness and weight below is copied from the maker's own page, which the first column links, as it read on 20 Nov 2026. 10 of the 15 state a weight. Where a page states none, the calculator gives no total weight for that product. We weighed and measured none of these ourselves.

Maker and productSize as statedThicknessWeight as stated
Rubber-Cal Horse Stall Mat, 3/4 in4 ft x 6 ft3/4 in90 lb a mat
Rubber-Cal Horse Stall Mat, 1/2 in4 ft x 6 ft1/2 in67 lb a mat
Rubber-Cal Equine-Flex Horse Stall Mat4 ft x 6 ft5/8 in100 lb a mat
Humane (SurfaceCo) The Original Horse Stall Mat4 x 6, trimmed to 71 in x 47 in3/4 in (18 mm)about 94 lb a mat
North West Rubber Red Barn Max, 4 ft x 6 ft4 ft x 6 ft3/4 in92 lb a mat (our reading of the list)
North West Rubber Red Barn Classic, 4 ft x 6 ft4 ft x 6 ft3/4 in100 lb a mat (our reading of the list)
Regupol aktivpro tile1 in x 24 in x 24 in1 in18 lb a tile
Ecore Fit Collection interlocking tile8 mm x 23 in x 23 in8 mmnot stated on the page
Ecore Performance UltraTile1 in x 24 in x 24 in1 innot stated on the page
Rubber-Cal Elephant Bark roll, 3/8 in48 in wide, any length up to 50 ft3/8 in (9.5 mm)2 lb per sq ft
Rubber-Cal Elephant Bark roll, 1/4 in48 in wide, any length up to 50 ft1/4 in (6.4 mm)1.25 lb per sq ft
Rubber-Cal Elephant Bark roll, 5 mm48 in wide, any length up to 50 ft5 mm0.97 lb per sq ft
Regupol aktiv roll48 in wide, custom length1/4, 5/16 or 3/8 innot stated on the page
Regupol aktivplus roll48 in wide, custom length1/2 innot stated on the page
Ecore Fit Collection roll48 in wide, standard rolls of 25 or 50 linear ft6, 8 or 9 mmnot stated on the page

Two notes on reading the table. North West Rubber lists the sizes and weights of its Red Barn mats in the same order without pairing them, so matching the 4 by 6 ft mat to its weight is our reading. Rubber-Cal's stall mat page states 90 lb for the 3/4 inch mat in its specifications and says "Each mat weighs 100lbs" in its installation text; the calculator uses the specification figure. REP Fitness's 4 by 6 ft mat page answered our request with a rate limit on 20 Nov 2026, so that mat is not in the menu. Enter the size on its label as a custom piece.

All three roll makers here state a roll width of 48 inches. Rubber-Cal sells its Elephant Bark roll in any length up to 50 continuous feet. Regupol lists the length of its aktiv and aktivplus rolls as custom. Ecore lists standard rolls of 25 or 50 linear feet.

How the calculator counts

The sizes come from the makers. The counting is our own method, and it is a simple one.

  1. The room is a rectangle. You enter one length and one width. For an L shaped room, split it into two rectangles and run each.
  2. Each direction is divided and rounded up. The room's length is divided by the side of the piece that runs along it, and the result is rounded up to a whole piece. The width is done the same way. The two results multiplied give the count: so many rows of so many pieces.
  3. Both ways round. A piece that is not square is counted twice, once with its long side along the room's length and once along the width. The calculator highlights the layout with fewer pieces, and on a tie the one with fewer cut pieces.
  4. A cut piece is a whole piece. Whole pieces are the full rows times the full columns. Every other piece in the grid is cut, and each one is counted as a piece you buy.
  5. Offcuts are not reused. The piece cut off the end of a row is never placed anywhere else. The line under the table gives the fewest pieces any layout could use, which is the floor's area divided by the piece's area and rounded up, so you can see how much a cleverer layout might save.
  6. Rolls are strips. The room's side across the strips is divided by the roll's width and rounded up. Each strip is as long as the room's other side. The last strip is cut lengthwise when the room is not a whole number of roll widths. With a roll length entered, each roll gives as many full strips as fit in it, and what is left of the roll is not used.
  7. Spare is your number. A spare percentage adds that share of the count, rounded up to a whole piece.
  8. Weight and cost are multiplication. Total weight is the count times the maker's stated weight per piece, or for a roll the maker's stated pounds per square foot times the area bought. Cost is the count times the price you type.

Lengths are held as whole numbers of a small unit, so feet, inches to a sixteenth and millimetres all divide exactly. One inch is 25.4 millimetres exactly, by the definition in NIST Handbook 44.

What this calculator does not tell you: thickness

The calculator says nothing about what thickness to buy. Thickness does not change how many pieces cover a floor, so it is not an input. The thickness column in the table above repeats what each maker states about its product and is not advice. For that question see how thick gym flooring should be. Our home gym flooring and noise guide picks a floor by room and lift, the horse stall mat guide covers the mats themselves, and a lifting platform is a separate build with its own sizes: see deadlift platform dimensions.

Limits

It does not reuse offcuts. A hand drawn layout can save a piece by turning some of the mats or by fitting an offcut into a gap, as the 10 ft by 10 ft example above shows. North West Rubber's installation sheet for stall mats says to "decide on the best fitting pattern for the stall" and to begin "with the mats that require little or no cutting". The calculator's grid is the plain layout, not the best one.

It starts in a corner. The grid puts whole pieces against two walls and every cut against the other two. Ecore's manual says tile installation "generally starts in the middle of the room". Started there, a row that needs a cut usually has a cut piece at both ends, and the count can then differ from this grid's.

It does not plan around posts, doorways or closets. It knows one length and one width. Regupol's instructions for its aktiv rolls add a warning that applies to any room: "Assume that the walls you are butting against are not straight or square."

Expansion gaps. The calculator leaves no gap at the walls unless a maker's install guide gives one for the product you picked. Of the guides we opened, one does. Ecore's technical manual for its Fit Collection interlocking tiles says, for a wall to wall layout: "Do not compression fit the tile against the wall. Allow 1/4" around the perimeter for expansion." That gap is offered as a tick box for that tile only, as Ecore's figure. Regupol's instructions for its aktiv rolls, its dowel instructions for aktivpro tiles and North West Rubber's stall mat sheet give no wall gap. SurfaceCo's page for Humane's mat gives no gap figure either. It says the mat's trued edges allow "easy, no gap, wall to wall installation", which is a line about how the mats fit and not an expansion allowance. If your maker's guide gives a gap, take twice that gap off the room's length and width before you enter them.

Rolls need trim length. The calculator's strips are exactly as long as the room. Regupol's instructions say "Cut all rolls at the required length, including enough to run up the wall", and Ecore's manual says to include enough to run up the wall a few inches. Neither gives a figure in inches, so the calculator adds none. Add what your maker's guide asks for.

Fixed rolls are not joined to save a roll. With a roll length entered, what is left of a roll after its last full strip is not used again, and a strip longer than one roll takes whole rolls for each strip. The count can then be a roll or more above the linear feet the room needs. Ecore's manual describes end seams in a roll floor, staggered and overlapped by about 3 to 6 inches before they are trimmed. If you plan end seams, compare the rolls counted with the linear feet in the table. When the linear feet alone would take fewer rolls, the line under the table says how many.

Nominal sizes and tolerances. The three nominal pieces in the menu are counted at exactly their names. A real piece can differ: Humane's mat is trimmed to 71 by 47 inches, Ecore's interlocking tile is 23 inches square, and Regupol's installation instructions give a dimensional tolerance of plus or minus 1/8 inch for its aktivpro tile. Measure a piece before you plan a tight fit.

Weights are the makers' statements. The total weight is arithmetic on a figure from a product page. We weighed none of these products.

No claim about noise, impact or wear. This page counts pieces. It makes no claim about what any floor does under a dropped weight.

Bounds. The calculator takes rooms up to 200 ft each way and a spare of up to 50 percent. Those bounds are ours and keep a mistyped number from producing a nonsense count.

Short answers

How much gym flooring do I need?

Divide the room's length by the piece's length and its width by the piece's width, round each up, and multiply. A 12 ft by 12 ft room takes 6 mats at a full 4 ft by 6 ft or 36 tiles at a full 2 ft by 2 ft. Check the other orientation too, because it can give a different count.

How many 4x6 mats do I need for a 12x12 stall?

6, if the mats are a full 4 ft by 6 ft: 2 along one side and 3 along the other, with no cuts. Some mats are smaller than their name. Humane's is trimmed to 71 by 47 inches, and 6 of those leave a strip of 2 in bare one way and 3 in the other.

How many rubber floor tiles do I need?

For tiles at a full 2 ft by 2 ft, a 12 ft by 12 ft room takes 36. A tile can be smaller than 2 ft. Ecore's interlocking tile is stated as 23 inches square, and the same room takes 49 of them, 13 cut, when Ecore's 1/4 inch wall gap is left.

How do I work out rubber roll flooring?

Divide the room's side across the strips by the roll's width and round up to get the strips. Each strip is as long as the room's other side. A 12 ft by 10 ft room with a 4 ft wide roll takes 3 strips and 30 linear ft one way and 36 linear ft the other.

Does the calculator allow for an expansion gap?

Only where a maker's install guide gives one. Ecore's manual for its interlocking tiles says to allow 1/4 inch around the perimeter, so that gap is a tick box for that tile. For any other product, take twice the maker's gap off each side of the room before you enter it.

How much will the flooring weigh?

Pick a maker's product and the calculator multiplies the count by the maker's stated weight. Rubber-Cal states 90 lb for its 3/4 inch 4 ft by 6 ft stall mat, so 6 of them come to 540 lb. For products whose page states no weight, no total is given.

What thickness of gym flooring should I buy?

This calculator does not answer that. It counts pieces, and thickness does not change the count. Our guide to how thick gym flooring should be covers what the makers say.

Does the gym flooring calculator work in metres?

Yes. Switch to metres and enter the room as decimals. A 4 m by 3 m room takes 35 tiles of 2 ft by 2 ft. A custom piece is entered in centimetres.

Before you order

Ecore's manual notes that "Most walls are not straight, or corners square", so measure the room at more than one point, and enter the larger figures if you want the count to cover the whole floor. Read the maker's own install guide for gaps, trim and the subfloor it asks for. For what a stall mat is and how the makers' mats differ, see horse stall mats for a home gym. For thickness, see how thick gym flooring should be. For a platform over the floor, see deadlift platform dimensions, and for lifting over neighbors, home gym flooring and noise.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. Horse Stall Mat Heavy-Duty Rubber Mat, Rubber-Cal. Used for: Rubber-Cal Horse Stall Mat in the menu and table: size 4 ft x 6 ft, thickness 3/4 in and 1/2 in, weight 90 lbs for the 3/4 in mat and 67 lbs for the 1/2 in mat; the installation text 'Each mat weighs 100lbs'; no wall gap given. Checked .
  2. Equine-Flex Horse Stall Mat, Rubber-Cal. Used for: Rubber-Cal Equine-Flex in the menu and table: 'Size: 4ft x 6ft', thickness 5/8 in, weight 100 lbs. Checked .
  3. EM502 The Original Horse Stall Mat, SurfaceCo (Humane brand). Used for: Humane stall mat in the menu and table: 3/4 in (18 mm), a 4 x 6 mat 'trimmed to four trued edges' measuring 71 in x 47 in, 'Each mat weighs about 94lbs'; 'no gap, wall to wall installation'. The page builds its text with a script, so we read it from the page's own source. Checked .
  4. Red Barn MAX (3/4 in), North West Rubber. Used for: Red Barn Max in the menu and table: size 3 x 4 ft or 4 x 6 ft, thickness 3/4 in, 'Weight: 46 or 92 lbs'; pairing 92 lb with the 4 x 6 ft mat is our reading. Checked .
  5. Red Barn Classic (3/4 in Thick), North West Rubber. Used for: Red Barn Classic in the menu and table: sizes 3 x 4, 4 x 6, 4 x 8 and 5 x 7 ft, thickness 3/4 in, 'Weight: 50, 100, 135 or 150 lbs'; pairing 100 lb with the 4 x 6 ft mat is our reading. Checked .
  6. Stall Mat Installation, North West Rubber. Used for: 'Measure the stall and decide on the best fitting pattern for the stall. Bring the mats in one at a time, beginning with the mats that require little or no cutting'; the sheet gives no wall gap. Checked .
  7. REGUPOL aktivpro High-Performance Rubber Tiles, REGUPOL. Used for: Regupol aktivpro tile in the menu and table: '1-in x 24-in x 24-in', and '18 lb/tile' under Standard Tile Weight. Checked .
  8. Installation Instructions, REGUPOL aktivpro (dowel installation guide), REGUPOL. Used for: A dimensional tolerance for tiles of plus or minus 1/8 in; in wall to wall installations the outer course is cut to fit; the guide gives no wall gap. Checked .
  9. Fit Collection, Ecore. Used for: Ecore Fit Collection tile and roll in the menu and table: interlocking tile 8 mm x 23 in x 23 in; rolls 6, 8 or 9 mm x 48 in; 'Standard Roll Length: 25/50 LF'; no weight on the page. Checked .
  10. Fit Collection Rolls and Interlocking Tiles Technical Manual (revised 22 Oct 2026), Ecore. Used for: The one wall gap the calculator offers: for interlocking tiles laid wall to wall, 'Do not compression fit the tile against the wall', with 1/4 in allowed around the perimeter for expansion; 'Most walls are not straight, or corners square, and tile installation generally starts in the middle of the room'; rolls are cut 'including enough to run up the wall a few inches'; end seams in a roll floor are staggered, overlapped by about 3 to 6 inches and trimmed after the rolls have relaxed. Checked .
  11. Performance UltraTile, Ecore. Used for: Ecore Performance UltraTile in the menu and table: 1 in x 24 in x 24 in; no weight on the page. Checked .
  12. Elephant Bark 3/8 in, Rubber-Cal. Used for: Rubber-Cal Elephant Bark rolls in the menu and table: width 48 in; 5 mm, 6.4 mm (1/4 in) and 9.5 mm (3/8 in) thick; '0.97 lbs/Sq ft 3/16-inch', '1.25 lbs/Sq ft 1/4-inch', '2.00 lbs/Sq ft 3/8-inch'; 'any length up to 50 continuous feet in half-foot increments'. Checked .
  13. REGUPOL aktiv Rolled Rubber Flooring, REGUPOL. Used for: Regupol aktiv roll in the menu and table: 'Width: 48-in', 'Length: Custom', thicknesses 3/8, 5/16 and 1/4 in; no weight on the page. Checked .
  14. Installation Instructions, REGUPOL aktiv, REGUPOL. Used for: 'Assume that the walls you are butting against are not straight or square'; 'Cut all rolls at the required length, including enough to run up the wall'; the guide gives no wall gap and no trim figure. Checked .
  15. REGUPOL aktivplus High-Performance Rubber Flooring, REGUPOL. Used for: Regupol aktivplus roll in the menu and table: 1/2 in thick, 'Width: 48-in wide', 'Length: custom lengths'; no weight on the page. Checked .
  16. NIST Handbook 44, 2026, Appendix B: Units and Systems of Measurement, National Institute of Standards and Technology. Used for: '1 inch = 25.4 millimeters exactly', used for rooms entered in metres; 1 avoirdupois pound = 0.453 592 37 kilogram, used when a total weight is also shown in kg. Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.