Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

How Much Does a Squat Bar Weigh?

A squat bar weighs 20 kg, about 44.1 lb, if it is a power bar built to the International Powerlifting Federation's rule, which sets bar and collars at 25 kg with two 2.5 kg collars. A dedicated squat bar is heavier: five of the six whose makers' pages we read on 19 Nov 2026 state 25 kg or 55 lb, and one states 30 kg, or 66 lb.

Updated . By the BASALT editorial team.

A squat bar weighs 20 kg, about 44.1 lb, if it is a power bar built to the International Powerlifting Federation's rule. A dedicated squat bar is heavier: of the six whose makers' pages we read on 19 Nov 2026, five state 25 kg (about 55.1 lb) or 55 lb and one states 30 kg, or 66 lb. A squat bar with handles is a safety squat bar: three makers' figures, as examples, are 50 lb, 25 kg and 30 kg. Figures are the makers' or the rulebook's own unless we say they are ours, the conversions are ours, and we weighed none of these squat bars.

Which bar is in the squat rack

"Squat bar" means two things: any straight bar that sits in a squat rack, and a special bar built only for squatting. They do not weigh the same.

The straight bar used for squats, bench presses and deadlifts is a power bar. The IPF's Technical Rulebook, effective 1 March 2026, sets one bar for all three lifts: no more than 2.2 m long, about 86.6 in, with a shaft of 28 to 29 mm. It states the weight with the collars on: "Weight of the bar and collars are to be 25 kg", and each collar "must weigh 2.5 kg". Take the two collars off and the bar by itself is 20 kg, about 44.1 lb. That subtraction is ours.

One maker's example: Texas Power Bars lists its Texas Power Bar "Original" at 44 lb / 20 kg on its compare page and at 45 lbs on the bar's own product page, 86 in long, with a 28.5 mm shaft. Not every straight bar is a 20 kg bar, though: the same maker sells its Multi-Purpose Bar in 44 lb / 20 kg, 33 lb / 15 kg and 22 lb / 10 kg versions. The how much does a barbell weigh guide covers every bar type.

Dedicated squat bar weight, length and shaft diameter

A dedicated squat bar is a straight bar that is longer, thicker and heavier than a power bar. Here is what each maker states.

As each maker states them on its own product or comparison page, and the IPF in its rulebook, read 19 Nov 2026. By "maker" we mean the brand that sells the bar under its own name. Figures after "about" are our conversions at 2.54 cm to the inch and 0.4535924 kg to the pound. "Not stated" means the figure is not in the text we read.
BarStated weightOverall lengthShaft diameterLoadable sleeve
For comparison: power bars
IPF rulebook bar25 kg with two 2.5 kg collars, so 20 kg aloneNo more than 2.2 m, about 86.6 in28 to 29 mmNot stated
Texas Power Bars, Texas Power Bar "Original"44 lb / 20 kg on the maker's compare page; 45 lbs on its product page86 in28.5 mm15 in on its product page
Dedicated squat bars
Texas Power Bars, Texas Squat Bar PRO55 lb / 25 kg94 1/2 in, about 240 cm32 mm17.75 in
REP Fitness, Helios Squat Bar25 kg (55.1 lbs)94.5 in, about 240 cm32 mm17 in
BullrocK Fitness, Bison Squat Bar25 kg2400 mm, about 94.5 in32 mm425 mm, about 16.7 in
Strength Shop, Bastard Squat Bar, 32 mm25 kg2.47 m, about 97.2 in32 mm460 mm, about 18.1 in
Strength Shop, Bastard Squat Bar, 35 mm25 kg233 cm, about 91.7 in35 mm43 cm, about 16.9 in
Texas Power Bars, Monster Texas Squat Bar30 kg / 66 lb101 1/2 in, about 257.8 cm35 mm18 3/4 in

Five of these six squat bars, from four makers, state 25 kg or 55 lb, and Texas Power Bars' Monster states 30 kg. Their shafts are 32 or 35 mm against the IPF's 28 to 29 mm, and all six are longer than the IPF's 2.2 m limit: from Strength Shop's 35 mm bar at 233 cm, about 5.1 in over it, to the Monster at 101 1/2 in, about 14.9 in over it.

Rogue's and Mirafit's squat bar pages refused our requests on 19 Nov 2026, so this page gives no figure for them.

Why a squat bar is longer, thicker and heavier

The makers give their own reasons:

Part of the extra length sits between the collars. Texas Power Bars gives 55 1/2 in from inside collar to inside collar on the Squat Bar PRO and 57 1/2 in on the Monster, and REP gives 56.3 in between sleeves; the IPF bar has 1.31 to 1.32 m between collar faces, about 51.6 to 52.0 in. The four racks in the width table of our power rack dimensions guide come to about 46 to 48 inches across the outside of the uprights, so on paper each of those bars spans them. Texas Power Bars says the PRO racks in full-size commercial power cages and squat stands, but for the 101 1/2 in Monster it tells buyers to measure their gym space and rack width, especially with compact racks.

A dedicated squat bar is not an IPF bar. At 32 mm and 94.5 in it is outside the rulebook's 29 mm and 2.2 m limits, and the IPF's rule is that only bars meeting its specifications are used for all lifts. REP sells the Helios for training for competitions that use squat bars, so check your own federation's rulebook.

Squat bar weight with handles: the safety squat bar

A squat bar with handles is a safety squat bar: a padded bar with handles in front. There is no single weight for one. Three makers' own figures, read 19 Nov 2026:

These three alone differ by about 16 lb, and they are examples, not the full range. The how much does a barbell weigh guide has a table of 7 safety squat bars from 6 makers. If the bar is guided by rails, it is a Smith machine, and its starting weight is a different question: see the Smith machine bar weight guide.

Squat bar weight in a gym

This page gives no figure for any gym chain: we print a chain's bar weight only where the chain itself publishes it. To find the weight of the bar in front of you:

  1. Read the bar. Look for a name or weight marked on it.
  2. Compare its size. A bar about 94.5 in long with a 32 mm shaft matches three of the 25 kg squat bars in the table, and one no longer than 2.2 m with a 28 to 29 mm shaft matches the IPF's 20 kg bar. Size does not prove weight: our barbell weight guide lists a 7 ft bar whose maker states less than 20 kg.
  3. Ask the staff which bar it is, or weigh it if it is yours: the method is in our how to weigh your weights guide.

Counting the bar in your squat

The bar counts toward what you lift. A 20 kg power bar with a 20 kg plate on each side is 60 kg, and a 25 kg squat bar with the same plates is 65 kg. In pounds, a 55 lb squat bar with a 45 lb plate on each side is 145 lb. Log a 25 kg squat bar as a 20 kg bar and every set is recorded 5 kg light.

The plate calculator has an "Another Olympic bar: enter its weight" choice, so enter 25 kg, 30 kg or your safety squat bar's figure instead of a 20 kg bar's.

The Signature Fitness 1 inch standard bars we sell are lighter than any bar above: they weighed about 12.4 lb (5 ft), 14.5 lb (6 ft) and 17.9 lb (7 ft) on our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. They take 1 inch plates.

Short answers

How much does a squat bar weigh by itself?

20 kg, about 44.1 lb, for a power bar built to the IPF's rule, which sets bar and collars at 25 kg with two 2.5 kg collars. A dedicated squat bar is heavier: five of the six we read state 25 kg or 55 lb, and one states 30 kg.

How much does a squat bar weigh in lbs and kg?

A power bar is 20 kg, which Texas Power Bars prints as 44 lb. Dedicated squat bars from four makers state 25 kg, which Texas Power Bars prints as 55 lb and REP as 55.1 lbs, and the Monster Texas Squat Bar states 30 kg / 66 lb.

How much does a squat bar with handles weigh?

It depends on the model. Three makers' own figures, as examples and not the full range: Sorinex states 50 lbs, Vulcan Strength 25 kg (55 lbs) and Watson 30 kg. A squat bar with handles is a safety squat bar.

How much does the squat bar weigh in a gym?

It depends on which bar the gym bought. A power bar built to the IPF's rule is 20 kg and the dedicated squat bars we read state 25 kg or 30 kg, so read the bar's markings or ask the staff.

Related: how much does a barbell weigh, Smith machine bar weight, power rack dimensions, barbell length: will it fit, and the plate calculator.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. Original Texas Power Bar, Texas Power Bars. Used for: Overall length 86 in; inside collar to inside collar 52 in; loadable sleeve length 15 in; weight 45 lbs. Checked .
  2. IPF Technical Rulebook, effective 01.03.2026, sections 2.3 Bars and discs and 2.4 Collars, International Powerlifting Federation. Used for: Bar: total overall length not to exceed 2.2 m; distance between the collar faces 1.31 to 1.32 m; diameter of the bar 28 to 29 mm; weight of the bar and collars are to be 25 kg; collars must weigh 2.5 kg each (so the bar alone is 20 kg, our subtraction); only bars and discs that meet all specifications may be used throughout the entire competition and for all lifts; no sleeve length stated. Checked .
  3. Compare All Bars, Texas Power Bars. Used for: Texas Power Bar "Original": 44 lb / 20 kg, 86 in length, 28.5 mm shaft, 16 in loadable sleeves, for squat, bench and deadlift; Texas Multi-Purpose Bar in 44 lb / 20 kg, 33 lb / 15 kg and 22 lb / 10 kg variants; Texas Squat Bar PRO 55 lb / 25 kg, 94.50 in, 32 mm, 17.75 in sleeves; Monster Texas Squat Bar 66 lb / 30 kg, 101.5 in, 35 mm, 18 3/4 in sleeves; the 44 lb printed for its 20 kg power bars. Checked .
  4. Texas Squat Bar PRO, Texas Power Bars. Used for: Weight 55 lb / 25 kg; diameter 32 mm; overall length 94 1/2 in; inside collar to inside collar 55 1/2 in; loadable sleeve length 17.75 in; the maker's statement that the bar racks in standard, full-size commercial power cages and squat stands. Checked .
  5. Monster Texas Squat Bar, Texas Power Bars. Used for: Weight 30 kg / 66 lb; diameter 35 mm; overall length 101 1/2 in; inside collar to inside collar 57 1/2 in; loadable sleeve length 18 3/4 in; the advice to measure your gym space and rack width, especially with compact racks. Checked .
  6. Helios Squat Bar, REP Fitness. Used for: Weight 25 kg (55.1 lbs); length 94.5 in; distance between sleeves 56.3 in; loadable sleeve length 17 in; shaft diameter 32 mm; the longer length keeps plates from hitting the rack uprights while racking or unracking; the 32 mm shaft adds rigidity and minimizes flex under heavy loads; 25 kg (55 lbs) is 5 kg (11 lbs) more than a standard 20 kg barbell because of the longer length and thicker shaft; a bar to train for competitions that use squat bars. Checked .
  7. The Bison Squat Bar (25kg, 32mm, 2400mm), Remastered, BullrocK Fitness. Used for: Bar weight 25 kg; shaft diameter 32 mm; bar length 2400 mm; loadable sleeve length 425 mm. Checked .
  8. Strength Shop Bastard Squat Bar, 32mm/25kg, Fully Knurled, Strength Shop. Used for: Weight 25 kg; length 2.47 m; shaft diameter 32 mm; loadable sleeve length 460 mm. Checked .
  9. Strength Shop Bastard Squat Bar, 35mm/25kg, Fully Knurled, Strength Shop. Used for: Weight 25 kg; length 233 cm; shaft diameter 35 mm; loadable sleeve length 43 cm; the 35 mm shaft spreads the pressure and weight of a heavy loaded bar more comfortably through the back. Checked .
  10. Safety Squat Bar, Sorinex. Used for: Weight 50 lbs; length 87.5 in. Checked .
  11. Safety Squat Bar, One Basic, Vulcan Strength. Used for: Barbell weight 25 kg (55 lbs); barbell length 91 in; the note that all provided measurements are approximations; handles. Checked .
  12. Safety Squat Bar, Watson. Used for: Weight 30 kg; handles at the front of the bar; padded. Checked .
  13. NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically, NIST. Used for: Inch to centimeter factor 2.54 and pound (avoirdupois) to kilogram factor 0.4535924, behind every figure after "about" (about 44.1 lb, 55.1 lb, 66.1 lb, 22.7 kg, 86.6 in, 240 cm and so on). Checked .
  14. Power Rack Dimensions, BASALT. Used for: The four racks in its width table come to about 46 to 48 inches across the outside of the uprights (46 stated by Titan for the T-3; the other three are our arithmetic from makers' inside widths and upright sizes, read 18 Nov 2026). Checked .
  15. How Much Does a Barbell Weigh, BASALT. Used for: It lists a 7 ft Olympic bar whose maker states less than 20 kg, covers every bar type, and has a table headed Safety squat bars: 7 bars, 6 makers. Checked .
  16. Smith Machine Bar Weight, BASALT. Used for: A Smith machine's bar is guided by rails and has a starting weight of its own. Checked .
  17. How we measure, BASALT. Used for: Our Signature Fitness 5, 6 and 7 ft 1 inch bars weighed about 12.4, 14.5 and 17.9 lb, our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.