Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Standard Bar Landmine: Do 1 Inch Bars Fit?

Some landmines take a 1 inch standard bar, but only some makers say so. On pages read 21 Nov 2026, Synergee says its rack landmine fits both 1 inch and 2 inch bars, and REP Fitness lists its Standard and Free Standing Landmines as 1 inch compatible. Valor Fitness says its landmines are for 2 inch Olympic bars only, and Titan Fitness, Bells of Steel, Fringe Sport and Sorinex name only Olympic bars.

Updated . By the BASALT editorial team.

Some landmines are stated to take a 1 inch standard bar and some are not, so look for the inch figure on the maker's page. Of ten landmines from eight makers read on 21 Nov 2026, Synergee and REP Fitness state a 1 inch fit on three, and Body-Solid says its platform fits "all standard and Olympic bars". Valor Fitness says 2 inch Olympic bars only, REP marks its Adroit model No for 1 inch sleeves, and Titan Fitness, Bells of Steel, Fringe Sport and Sorinex name only Olympic bars.

What is a barbell landmine?

A landmine holds one end of a barbell in a pivoting tube, so the other end swings freely. REP Fitness describes it as equipment "that attaches to a barbell", with the bar "fixed on one end but capable of swiveling or pivoting freely". The American Council on Exercise (ACE), a nonprofit that certifies exercise professionals, defines landmine training as resistance training "that uses a barbell anchored at one end", "typically in a specially designed attachment or simply in the corner of a room".

Sorinex says it developed its Landmine in 1999 and that the name came from building "explosion at the ground level".

Do 1 inch bars fit? Ten landmines by maker

From each maker's own page, read 21 Nov 2026; quoted words are the maker's. "Not mentioned" means the page names Olympic bars and no 1 inch bar. Rogue Fitness's pages refused our reader, so Rogue is not listed.
Maker and landmineHow it mountsStated tube size1 inch bar, in the maker's words
Rack mounted
Synergee Landmine AttachmentRack upright, 2x2, 2x3 or 3x3Sleeve depth 8"; no inner diameterYes: "Our Landmine fits both 1" Standard and 2" Olympic bars."
REP Fitness Standard LandmineREP racks, on "the included band peg"Not statedYes: REP's chart row for 1" sleeves reads "Yes"
REP x Kleva Built Adroit LandmineRack, "5/8-inch or 1-inch upright holes", or a free-standing versionNot statedNo: REP's chart row for 1" sleeves reads "No"; its 2" row reads "Yes"
Titan Fitness Rack-Mounted LandmineTitan T-2, T-3 and X-3 Series racksInside sleeve diameter 50mm; sleeve length 9.75-in.Not mentioned: "Compatible with Olympic barbells"
Bells of Steel Landmine Rack AttachmentRacks with 5/8" holes, or 1" holes in the Manticore versionBarbell holder diameter 51mmNot mentioned: made for "your favorite Olympic barbell"
Sorinex Landmine Rack Attachment3" x 3" tubing with 1" holesNot statedNot mentioned: the "Fits" line reads "Olympic Bars"
Post in a plate hole
Valor Fitness Landmine Attachment for Olympic Barbells, LM-7Slides into "a heavy Olympic weight plate with a 2" opening"Not statedNo: "designed for 2” Olympic bars only. They are not compatible with 1” diameter standard bars."
Fringe Sport Bumper Post Landmine"the center of a stack of bumper plates", or propped "in a corner of the room"Tube diameter 2 inches; tube length 10 inchesNot mentioned: "works with all standard Olympic barbells"
Floor base
Body-Solid TBR10 T-Bar Row PlatformLocks "to any 2" tubing, or it can be bolted to the floor"; the page adds "Cannot be used independently."Not stated"Fits all standard and Olympic bars." No inch size given
REP Fitness Free Standing LandmineFlat base on the floor, held in a corner or by a plate on its weight horn; "Can be bolted down"Not statedYes: REP's chart row for 1" sleeves reads "Yes (1.3")"

Which makers state a 1 inch fit, and which say no

An inch is exactly 25.4 mm, so a 1 inch bar end at its nominal size is about half as wide as Titan's 50mm tube or Bells of Steel's 51mm holder. Neither page says a 1 inch bar may be used, and we do not count a smaller bar in a larger tube as a fit. See Olympic vs standard barbell for the two sizes.

The word standard does not settle it: Fringe Sport writes "all standard Olympic barbells" beside a tube diameter of 2 inches. Stated weight capacities belong to the attachment, not to a bar: 500lb at Synergee, and 315 lb at Titan, Bells of Steel and Fringe Sport. BASALT prints no load rating for the Signature Fitness 1 inch bars it sells.

How to set up a barbell landmine

Fix the landmine first, slide one end of the bar into its tube, then load the other end.

Synergee lists a sleeve depth of 8", and the plate space on our three Signature Fitness bars is 9 1/16, 13 1/8 and 15 1/8 in per side (our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry), so on paper the fixed collar on each bar sits further from the bar's end than that sleeve is deep. That is a length comparison only: Synergee gives no inner diameter, and we have not test-fitted our bars in any landmine.

The corner of the room method

ACE describes it. Its landmine article says the bar is anchored "typically in a specially designed attachment or simply in the corner of a room", and its Barbell Jammers exercise page begins: "Place the end of a standard barbell in a corner so that it will not move unnecessarily". The same step puts a weight on the other end and holds it there with a collar.

ACE gives no bar diameter on either page and does not define standard, so do not read that line as naming a 1 inch bar. A corner has no tube, so there is no sleeve size to match. We have not tried our bars this way.

How bar length changes the arc

With one end held at a pivot, the free end can only move on a curve whose radius is the bar's length. For the same rise of the free end, a shorter bar turns through a larger angle and its tip moves further back toward the pivot. The tilt is the angle whose sine is the rise divided by the length.

Lengths of the three Signature Fitness 1 inch bars BASALT sells: our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Tilt and tip travel are our geometry from those lengths alone, with the pivot taken at the bar's far tip and heights measured from the pivot.
BarLength, the arc's radiusTilt with the tip 24 in upTilt with the tip 48 in upTip's move toward the pivot at 48 in up
5 ft60 in23.6 degrees53.1 degrees24.0 in
6 ft70 15/16 in19.8 degrees42.6 degrees18.7 in
7 ft84 in16.6 degrees34.8 degrees15.1 in

These are tip figures. A real landmine's pivot is not exactly at the bar's tip, and your hands hold the bar below the free end, so read them as a comparison of the three lengths. Lying flat, the bar needs its full length of floor in front of the pivot.

Short answers

Can you use a 1 inch standard bar in a landmine?

Yes, in a landmine whose maker says so. Synergee says its rack landmine fits both 1" Standard and 2" Olympic bars, and REP Fitness lists its Standard and Free Standing Landmines as 1 inch compatible. Valor Fitness says its landmines are not.

What is a barbell landmine?

A landmine is a pivoting holder for one end of a barbell, so the other end swings freely. Makers sell versions that mount on a rack, sit in a plate's hole or stand on a floor base.

How do you set up a barbell landmine?

Fix the landmine, slide one end of the bar into its tube, then load the other end. A rack version pins or bolts to an upright, a post version sits in the 2 inch hole of an Olympic plate, and a floor base is bolted down, weighted with a plate or set in a corner.

Can you do landmine exercises without an attachment?

Yes, according to ACE, which says the barbell can be anchored in a specially designed attachment or simply in the corner of a room. ACE gives no bar diameter there.

Related: Olympic vs standard barbell, do standard plates fit an Olympic bar, power rack dimensions, and the 5 ft, 6 ft and 7 ft Signature Fitness 1 inch bars.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. Synergee Landmine Attachment, Synergee. Used for: Rack landmine for 2x2, 2x3 and 3x3 racks with a converter for 5/8 in and 1 in holes; "Our Landmine fits both 1" Standard and 2" Olympic bars."; a "locking knob secures the bar"; Landmine Sleeve Depth 8"; Weight Capacity 500lb; no sleeve inner diameter stated.. Checked .
  2. The Ultimate Guide to REP Landmines: Which One Is Right for You?, REP Fitness. Used for: REP's definition of a landmine (attaches to a barbell; bar fixed on one end but capable of swiveling or pivoting freely); comparison chart rows 2" Sleeve Compatible? Yes / Yes / Yes and 1" Sleeve Compatible? Yes / Yes (1.3") / No for the Standard Landmine, Free Standing Landmine and REP x Kleva Built Adroit Landmine; Standard Landmine attaches to REP racks with the included band peg placed outside the rack; Free Standing Landmine's flat base held by sticking it into a corner or loading a plate on its weight horn, "Can be bolted down"; Adroit rack version for 5/8-inch or 1-inch upright holes or a free-standing version; both the Standard and Free Standing Landmines "work with 1-inch barbell sleeves"; 1 inch bar owners pointed to the Standard Landmine.. Checked .
  3. Rack-Mounted Landmine, Titan Fitness. Used for: Compatible with T-2, T-3 and X-3 Series Power Racks; Inside Sleeve Diameter 50mm; Sleeve Length 9.75-in.; Weight Capacity 315 lb.; "Compatible with Olympic barbells"; no mention of a 1 inch bar.. Checked .
  4. Landmine Rack Attachment, Bells of Steel. Used for: Standard version fits racks with 5/8 in holes and the Manticore version racks with 1 in holes; Barbell Holder Diameter 51mm; Weight Capacity 315lb / 143kg; designed to work with "your favorite Olympic barbell"; no mention of a 1 inch bar.. Checked .
  5. Landmine Rack Attachment, Sorinex. Used for: Sorinex says its Landmine was originally developed in 1999 and was named for building "explosion at the ground level"; mounts to 3" x 3" tubing with 1" holes; specification Fits: Olympic Bars; no tube diameter and no mention of a 1 inch bar.. Checked .
  6. Landmine Attachment for Olympic Barbells (LM-7), Valor Fitness. Used for: Post landmine held by sliding it into a heavy Olympic weight plate with a 2" opening; "Simply insert the landmine attachment into a heavy Olympic plate, slide your Olympic barbell into the sleeve"; stack anchor plates up to 1/8 in away from the bracket; its FAQ says Valor landmine attachments and handles are designed for 2 inch Olympic bars only and are not compatible with 1 inch diameter standard bars.. Checked .
  7. Bumper Post Landmine, Fringe Sport. Used for: Post landmine put in the center of a stack of bumper plates or propped in a corner of the room; "works with all standard Olympic barbells"; Tube length 10 inches; Tube diameter 2 inches; Weight capacity 315 pounds; no mention of a 1 inch bar.. Checked .
  8. TBR10 T-Bar Row Platform, Body-Solid. Used for: "Fits all standard and Olympic bars."; "Simply put one end of the bar in the platform cup and load up the other end"; locks to any 2" tubing or can be bolted to the floor; "Cannot be used independently."; no bar or cup diameter stated.. Checked .
  9. The ACE Workout Builder for Landmine Training, American Council on Exercise (ACE). Used for: Landmine training "uses a barbell anchored at one end, typically in a specially designed attachment or simply in the corner of a room"; no bar diameter given.. Checked .
  10. Barbell Jammers (Exercise Library), American Council on Exercise (ACE). Used for: Step 1: "Place the end of a standard barbell in a corner so that it will not move unnecessarily", then a weight on the other end held with a collar; no bar diameter given and standard not defined.. Checked .
  11. About ACE, American Council on Exercise (ACE). Used for: ACE is the American Council on Exercise, a nonprofit organization certifying health coaches and exercise professionals.. Checked .
  12. SI Units: Length, National Institute of Standards and Technology. Used for: The inch is exactly equivalent to 25.4 mm, used to set a 1 inch bar end beside Titan's 50mm and Bells of Steel's 51mm tubes.. Checked .
  13. How we measure, BASALT. Used for: Signature Fitness 1 inch bars 60, 70 15/16 and 84 in long, plate space per side 9 1/16, 13 1/8 and 15 1/8 in: our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. The tilt angles and tip travel in the arc table are our geometry from those lengths.. Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.