Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Standard Barbell Dimensions

A standard barbell is a straight bar whose ends take plates with a 1 inch hole, and the rule books we read set no size for it. On seven brands' own pages, read 21 Nov 2026, they are sold as 5, 5.5, 6 and 7 ft, nominally 60, 66, 72 and 84 in, or 152.4, 167.64, 182.88 and 213.36 cm. Stated diameters run from 0.95 in to 1 in, and end lengths stated outright from 11.5 to 14 in.

Updated . By the BASALT editorial team.

A standard barbell is a straight bar whose ends take plates with a 1 inch hole. The rule books we read set no size for it, so each maker picks its own. On seven brands' own pages, read 21 Nov 2026, these bars are sold as 5, 5.5, 6 and 7 ft, nominally 60, 66, 72 and 84 in, or 152.4, 167.64, 182.88 and 213.36 cm. In our table, stated diameters run from 0.95 in to 1 in, and stated weights from York Fitness's 5.8 kg, about 12.8 lb, to Body-Solid's 20 lb, which it also gives as 9.07 kg. End lengths stated outright run from 11.5 to 14 in, and York Barbell's "fixed collars" figures, which we read as end lengths, from 11 to 15 1/2 in.

What is a standard barbell?

In shop listings, a standard barbell is a bar made for weight plates with a 1 inch hole. York Fitness words it as "For use with all standard discs with 1 inch diameter hole". A 2 inch Olympic bar is a different size class: Olympic barbell dimensions has its figures, and Olympic vs standard barbell shows how to tell the two apart.

No rule book we opened defines a standard bar. The two we read on 21 Nov 2026 govern competition bars with 2 inch class sleeves: the IWF's 2024 rules set the sleeves at 5 cm in diameter, and the IPF's 2026 rulebook sets them at 50 to 52 mm. Neither gives a size for a bar that takes 1 inch plates. So "standard" is a trade name, and each maker chooses the length, diameter, end length and weight. We did not search national or industry standards, so this is not proof that none exists.

1 inch standard barbell dimensions by maker

The table covers 16 bars in nine rows, from seven brands' own sites. York Barbell and York Fitness are separate sites, so we count them separately. Every figure is the maker's own, and we measured none of these bars.

From each maker's own product page, text and pictures, read 21 Nov 2026. "Picture" marks a figure printed only in a product picture. "Not stated" means the page we opened is silent. Figures after "about" are our conversions at 2.54 cm to the inch; other paired units are the maker's own.
Maker and barOverall lengthDiameter, as statedSleeve or end, eachBar weightEnds and collarsMaker's stated capacity
CAP Barbell Standard Threaded Bar, 5-Feet (RB-60T)60 in, about 152.4 cm (picture)0.95 in, about 2.41 cm, marked on the shaft (picture)11.8 in, about 29.97 cm (picture)Not statedThreaded ends. Star collars includedNone stated
Sunny Health & Fitness 60" Threaded Barbell (SF-SB04-60)60 in, about 152.4 cm1 in (25.4 mm) grip11.5 in threaded sleeves, about 29.21 cm13.2 lbThreaded ends. Star lock collars included300 lb, "max load"
York Barbell Chrome Deluxe Weight Bar w/ Fixed Inner Collars, 5, 5.5, 6 and 7 ftNominal sizes onlyNot stated11, 15, 15 and 15 1/2 in, about 27.94, 38.1, 38.1 and 39.37 cm. York calls the figure "fixed collars"Not statedTwo fixed inner collars. Threaded or smooth not statedNone stated
York Fitness Standard 1" Spinlock Barbell Bar, 5 and 6 ft152 cm and 182 cmNot statedNot stated5.8 kg and 6.8 kgSpinlock ends. Two spinlock collars included125 kg, "maximum weight"
York Fitness Standard 1" Solid Steel Barbell Bar, 5 and 6 ft152 cm; 6 ft: 182 cm in the size menu, 180 cm in the feature listNot statedNot stated6 kg and 7 kgWelded inner collars. Needs spring collars, not included125 kg, "maximum weight"
Marcy Standard 6' Weight Bar TRB-72.2, two-piece72 in, about 182.88 cm (picture)1 in "Diameter Sleeve" (picture)14 in, about 35.56 cm (picture)15.5 lb (7 kg) (picture)Threaded ends. Two spin lock collars included300 lb (136 kg), "Max Weight" (picture)
Body-Solid RB72 1" Standard 6' Bar72.00 in / 1,828.80 mm"6 feet by 1 inch"Not stated18 lb / 8.16 kgNot statedNone stated
Body-Solid RB84 1" Standard 7' Bar84.00 in / 2,133.60 mm"7 feet by 1 inch"Not stated20 lb / 9.07 kgNot statedNone stated
XPRT Fitness Standard 1-Inch Chrome Barbell, 5, 6 or 7 FTNominal sizes onlyNot statedNot statedNot stated"Smooth, non-threaded design"350 lb, "Rated load capacity", each length

York Barbell's page for its Chrome Spin-Lock Weight Bar, in 5, 5.5 and 6 ft, gives the same 11, 15 and 15 in figures and no diameter, weight or capacity. York Fitness does not say whether its spinlock bar weights count the two collars.

Of the 16 bars, eight have a stated bar weight and nine a stated capacity. A capacity is the maker's own claim, and we tested none: how much weight can a 1 inch barbell hold covers what a rating does and does not promise. For the gap between the collars, see is a 1 inch barbell worth it.

Standard barbell length in inches and cm

These bars are sold by the foot. Feet times 12 gives inches, and inches times 2.54 gives centimeters. NIST lists 2.54 cm to the inch as an exact factor.

Inches and centimeters are our arithmetic. Makers' figures read 21 Nov 2026.
Nominal lengthInchesCentimetersWhat makers state
5 ft60 in152.4 cmCAP Barbell and Sunny Health & Fitness: 60 in. York Fitness: 152 cm
5.5 ft66 in167.64 cmYork Barbell: the size name only
6 ft72 in182.88 cmMarcy: 72 in. Body-Solid: 72.00 in / 1,828.80 mm. York Fitness: 182 cm, and 180 cm in one feature line
7 ft84 in213.36 cmBody-Solid: 84.00 in / 2,133.60 mm

A nominal length is a name, not a measurement: York Fitness prints both 182 cm and 180 cm for its 6 ft solid bar. At 213.36 cm, a 7 ft bar is shorter than the IWF men's bar, which is 220 cm long. The barbell length guide checks a bar against your rack.

Standard barbell diameter

"1 inch" names the plate hole the bar is made for. One inch is 2.54 cm, or 25.4 mm. Five of the 16 bars come with a stated diameter, each put a different way: Sunny Health & Fitness states a grip diameter of 1 in (25.4 mm), CAP Barbell's dimension picture marks 0.95 in on the shaft, about 2.41 cm, Marcy's picture labels a 1 in diameter sleeve, and Body-Solid describes its two bars as so many feet "by 1 inch".

The name is not one fixed size across the trade. Ivanko's site files its B-66 under Standard Bars and states a 1 1/16 in diameter, about 2.7 cm, on a 66 in bar with a 12 1/2 in plate loading length. Ivanko says the bar was designed "originally and primarily" for making fixed-weight barbells in commercial settings, and the page does not say which plates fit, so the bar is not in our table. Do standard plates fit an Olympic bar explains the two plate sizes.

Standard barbell sleeve length

The sleeve, or end, is the part outside the fixed collar that plates slide onto. Three makers state it outright: Sunny Health & Fitness lists 11.5 in threaded sleeves, CAP Barbell's picture marks 11.8 in, and Marcy's picture marks 14 in. Marcy's picture adds up, 14 + 44 + 14 = 72 in, while its text gives a 42 in grip length between the sleeves.

York Barbell gives 11 in for its 5 ft bar, 15 in for the 5.5 and 6 ft, and 15 1/2 in for the 7 ft, but calls the figure "fixed collars". It lists 37, 36, 41 1/2 and 52 in between the collars. Two ends plus that gap come to 59, 66, 71 1/2 and 83 in, close to each nominal length, so we read York's figure as the length of each end. That reading is ours, not York's wording.

An outer collar takes part of any end. How many plates fit on a barbell turns an end length into a plate count.

BASALT's three 1 inch bars

BASALT sells Signature Fitness 1 inch standard barbells in 5 ft, 6 ft and 7 ft. These are our own figures, not the maker's.

Source: our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Each weight is one bathroom scale reading. Plate space runs from the fixed collar to the end of the bar. Centimeters are the inch figure times 2.54.
Signature Fitness 1 inch barLengthWeightPlate space per side
5 ft60 in (152.4 cm)about 12.4 lb9 1/16 in (23.02 cm)
6 ft70 15/16 in (180.18 cm)about 14.5 lb13 1/8 in (33.34 cm)
7 ft84 in (213.36 cm)about 17.9 lb15 1/8 in (38.42 cm)

We print no sleeve diameter and no load rating for these bars, and we have not checked whether their ends are threaded. 5 ft vs 6 ft vs 7 ft barbell compares the three lengths for room, racking and plates.

Short answers

How long is a standard barbell?

Nominally 5, 5.5, 6 or 7 ft on the pages we read, which is 60, 66, 72 or 84 in, or 152.4, 167.64, 182.88 or 213.36 cm. A maker's figure can differ: York Fitness prints both 182 cm and 180 cm for one 6 ft bar.

What is the diameter of a standard barbell?

About 1 inch, which is 2.54 cm, but stated figures vary. Sunny Health & Fitness states a 1 in (25.4 mm) grip, and CAP Barbell's dimension picture marks 0.95 in, about 2.41 cm, on its 5 ft bar.

How long is the sleeve on a standard barbell?

From 11.5 to 14 in per end where a maker states it outright: Sunny Health & Fitness states 11.5 in, CAP Barbell 11.8 in and Marcy 14 in. York Barbell gives 11 to 15 1/2 in across four lengths under the words "fixed collars", which we read as end lengths.

Is there an official standard barbell size?

Not in the rule books we read. The IWF and IPF rules set competition bars with 5 cm and 50 to 52 mm sleeves, the 2 inch class, and give no size for a bar that takes 1 inch plates. Each maker sets its own dimensions.

Related: the store.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. CAP Standard Threaded Bar, 5-Feet (RB-60T), CAP Barbell. Used for: A 1 inch bar with threaded ends and star collars included; its dimension picture marks 60 in overall, 0.95 in on the shaft and 11.8 in on each end; the page states no bar weight and no capacity.. Checked .
  2. 60" Threaded Barbell w/ Star-Lock Collars (SF-SB04-60), Sunny Health & Fitness. Used for: Product dimensions 60 in long; 1 in (25.4 mm) grip diameter; 11.5 in threaded sleeves; product weight 13.2 lb; threaded ends, star lock collars included; max load 300 lb; fits 1 inch plates.. Checked .
  3. Chrome Deluxe Weight Bar w/ Fixed Inner Collars, York Barbell. Used for: Sizes 5, 5.5, 6 and 7 ft; two 11 in, 15 in, 15 in and 15 1/2 in "fixed collars" with 37, 36, 41 1/2 and 52 in between the collars; the description does not use the words sleeve or end length, so reading the figure as an end length is ours; two fixed collars; no diameter, bar weight, thread statement or capacity.. Checked .
  4. Chrome Spin-Lock Weight Bar w/ Spin-Lock Collars, York Barbell. Used for: Sizes 5, 5.5 and 6 ft with the same 11, 15 and 15 in figures; no diameter, bar weight or capacity.. Checked .
  5. York Fitness Standard 1" Spinlock Barbell Bar with Collars, York Fitness. Used for: 5 Foot (152 cm) and 6 Foot (182 cm) options; 5 FT bar 5.8 KG and 6 FT bar 6.8 KG; spinlock bar ends with 2 spinlock collars included; maximum weight of 125 KG; "For use with all standard discs with 1 inch diameter hole"; no diameter or sleeve length; does not say whether the weights count the collars.. Checked .
  6. York Fitness Standard 1" Solid Steel Barbell Bar, York Fitness. Used for: 5 Foot (152 cm) and 6 Foot (182cm) options in the size menu, 6 FT (180cm) in the feature list; 6 KG and 7 kg; welded inner collars; spring collars required and not included; maximum weight of 125 KG; no diameter or sleeve length.. Checked .
  7. Marcy Standard 6' Weight Bar | TRB-72.2, Marcy. Used for: Two-piece 6 foot bar with threaded ends and two spin lock collars; text: 42 in grip length between the sleeves; product pictures: 72 in overall, 14 in each end, 44 in centre, 1 in diameter sleeve, bar weight 15.5 lb (7 kg), max weight 300 lb (136 kg).. Checked .
  8. RB72 1" Standard 6' Bar, Body-Solid. Used for: 72.00 in / 1,828.80 mm long; 18 lb / 8.16 kg; described as 6 feet by 1 inch; no sleeve length, thread statement or capacity.. Checked .
  9. RB84 1" Standard 7' Bar, Body-Solid. Used for: 84.00 in / 2,133.60 mm long; 20 lb / 9.07 kg; described as 7 feet by 1 inch; no sleeve length, thread statement or capacity.. Checked .
  10. Standard 1-Inch Chrome Barbell, 5, 6 or 7 FT, XPRT Fitness. Used for: Sold as 5, 6 or 7 FT; "Loading ends: Smooth, non-threaded design"; "Rated load capacity: 350 LB" for each length; no measured length, diameter, sleeve length or bar weight.. Checked .
  11. B-66 5-1/2 ft. cold rolled steel bar, Ivanko Barbell. Used for: A bar filed under Standard Bars in the site menu: 1 1/16 in diameter, 66 in long, plate loading length 12 1/2 in; "Designed originally and primarily to be used in commercial applications for making a set of fixed-weight barbells"; the page does not say which plates fit.. Checked .
  12. IWF Technical and Competition Rules and Regulations 2024, men's bar (page 47), International Weightlifting Federation (IWF), copy hosted by the Polish Weightlifting Federation. Used for: Competition bar sleeves are 5 cm in diameter; the men's bar is 220 cm long; the text gives no size for a bar that takes 1 inch plates.. Checked .
  13. IPF Technical Rulebook 2026, bars and discs (page 8), International Powerlifting Federation. Used for: Sleeve diameter 50 mm to 52 mm; the text gives no size for a bar that takes 1 inch plates.. Checked .
  14. NIST Guide to the SI, Appendix B.9: factors for units listed by kind of quantity, National Institute of Standards and Technology. Used for: 1 inch is exactly 2.54 cm, the factor behind every centimeter conversion on the page; 1 lb is 0.4535924 kg, used to put the stated bar weights in order (5.8 kg is the lightest, 20 lb the heaviest) and to give York Fitness's 5.8 kg as about 12.8 lb (5.8 / 0.4535924 = 12.79).. Checked .
  15. SI Units: Length, National Institute of Standards and Technology. Used for: The inch is exactly equivalent to 25.4 mm.. Checked .
  16. How we measure, BASALT. Used for: Signature Fitness 1 inch bars 60, 70 15/16 and 84 in long, about 12.4, 14.5 and 17.9 lb, plate space per side 9 1/16, 13 1/8 and 15 1/8 in: our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.