Olympic Barbell Dimensions
The IWF men's Olympic barbell is 2200 mm long, which is 220 cm or 86.61 in. It has a 28 mm grip section, 50 mm sleeves that are 415 mm long and 1310 mm between the inside collars, and it weighs 20 kg. The IWF women's bar is 2010 mm, 79.13 in, with a 25 mm grip and 320 mm sleeves, and weighs 15 kg. Makers' bars differ, so check your own bar's figures.
A men's Olympic barbell built to the International Weightlifting Federation (IWF) rules is 2200 mm long, which is 86.61 in, with a 28 mm grip, 50 mm sleeves 415 mm long and 1310 mm between the inside collars. It weighs 20 kg. The women's bar is 2010 mm, 79.13 in, with a 25 mm grip, and weighs 15 kg. Below are both IWF bars and the IPF powerlifting bar from the rule books, then 14 bars from 7 makers' own pages, all read 19 Nov 2026. The inch figures for the rules are our conversions.
IWF men's and women's bar dimensions in mm, cm and inches
The IWF's Technical and Competition Rules and Regulations 2024 lists each bar in centimeters beside a drawing dimensioned in millimeters. The table prints millimeters; divide by 10 for centimeters, so 2200 mm is 220 cm. Inches are millimeters divided by 25.4, to two decimals: NIST gives the inch as exactly 25.4 mm.
| Part | Men's bar, mm | Men's bar, in | Women's bar, mm | Women's bar, in |
|---|---|---|---|---|
| Weight | 20 kg | 15 kg | ||
| Overall length | 2200 | 86.61 | 2010 | 79.13 |
| Grip section diameter | 28 | 1.10 | 25 | 0.98 |
| Sleeve diameter | 50 | 1.97 | 50 | 1.97 |
| Sleeve length, each | 415 | 16.34 | 320 | 12.60 |
| Inside collar width, each | 30 | 1.18 | 30 | 1.18 |
| Between the inside collars | 1310 | 51.57 | 1310 | 51.57 |
| Grip section, each side, smooth ring included | 445 | 17.52 | 445 | 17.52 |
| Collar to the smooth ring | 195 | 7.68 | 195 | 7.68 |
| Smooth ring width | 5 | 0.20 | 5 | 0.20 |
| Centre knurling | 120 | 4.72 | None | |
| Smooth shaft between knurled parts | 150, each side of the centre knurling | 5.91 | 420, one span | 16.54 |
| Identification marking | Blue | Yellow |
The parts add up. Men's bar: 415 + 30 + 1310 + 30 + 415 = 2200 mm. Women's bar: 320 + 30 + 1310 + 30 + 320 = 2010 mm. The two bars are the same length between the collars; the women's bar is 190 mm shorter because each sleeve is 95 mm shorter. Both carry a weight tolerance of +0.1% to -0.05%, which on 20 kg is 20 g over to 10 g under. The collars that hold the discs on are separate parts of 2.5 kg each.
IPF powerlifting bar dimensions
The International Powerlifting Federation's Technical Rulebook, dated 1 March 2026, sets limits, not single figures.
| Item | Rule, as printed | Inches |
|---|---|---|
| Total overall length | Not to exceed 2.2 m | 86.61 |
| Between the collar faces | 1.31 m to 1.32 m | 51.57 to 51.97 |
| Diameter of the bar | 28 mm to 29 mm | 1.10 to 1.14 |
| Diameter of the sleeve | 50 mm to 52 mm | 1.97 to 2.05 |
| Machined diameter markings | 81 cm apart | 31.89 |
| Centre knurling in the guideline drawing | 120 to 160 mm | 4.72 to 6.30 |
| Weight of the bar and collars | 25 kg, with collars of 2.5 kg each |
Two collars at 2.5 kg leave 20 kg for the bar. The rulebook prints no sleeve length. Against the IWF men's bar, the IPF allows a shaft up to 29 mm and a sleeve up to 52 mm, and its grip markings sit closer together: 81 cm apart, while the IWF's smooth rings are 910 mm apart between their inner edges by our arithmetic, 1310 minus 2 times 200.
Olympic bar dimensions by maker
Bars sold as Olympic do not all follow a rule book: CAP lists its 7 foot bar at 84 in and 35 lb. Here is what each maker states.
| Maker and bar | Weight | Overall length | Shaft diameter | Loadable sleeve, each | Between the collars |
|---|---|---|---|---|---|
| Full length bars | |||||
| Eleiko IWF Weightlifting Competition Bar, men | 20 kg / 44.09 lbs | 2200 mm / 86.61 in | 28 mm / 1.1 in | 415 mm | Not stated |
| Eleiko IWF Weightlifting Competition Bar, women | 15 kg / 33.07 lbs | 2010 mm / 79.13 in | 25 mm / 0.98 in | 320 mm | Not stated |
| Eleiko IPF Powerlifting Competition Bar | 20 kg / 44.09 lbs | 2200 mm / 86.61 in | 29 mm / 1.14 in | 433 mm | Not stated |
| REP Fitness Colorado Bar, 20 kg | 20 kg (44.1 lbs) | 86.6 in, about 219.96 cm | 28.5 mm | 16.1 in | Not stated |
| Texas Power Bars, Texas Power Bar Original | 45 lbs on its product page; 44 lbs / 20 kg on the maker's compare page | 86 in, about 218.44 cm | 28.5 mm | 15 in | 52 in |
| Texas Power Bars, Texas Power Bar Elite 20KG | 20 kg / 44 lbs | 86.50 in, about 219.71 cm | 29 mm | 16.75 in on the maker's compare page | Not stated |
| Texas Power Bars, Texas Deadlift Bar | 44 lb / 20 kg | 92 1/2 in, about 234.95 cm | 27 mm | 15 1/2 in | 56 1/2 in |
| Maniak Fitness Olympic bar HOME20 | 20 kg | 2200 mm | 30 mm | 415 mm | Grip length 1315 mm |
| Body-Solid OB86C, 7 ft | 44 lbs | 86 in, about 218.44 cm | 30 mm | 15.75 in, listed as collar length; 15.62 in sleeve length in its description | 51.50 in |
| CAP Olympic ECO Power Barbell Bar, 7 foot | 35 lb | 84 in in the option name, about 213.36 cm | Not stated | Not stated | Not stated |
| Shorter bars for 2 inch plates | |||||
| Titan Fitness TITAN Series Shorty | 14 kg (30 lb) | 72.75 in | 28.5 mm | 9 in | 54.25 in sleeve to sleeve |
| Body-Solid OB72B, 6 ft | 40 lb / 18.14 kg | 72 in | 30 mm | 11.25 in | 46 in, listed as inside sleeve dimensions |
| Titan Fitness 60 in Olympic Barbell | 25 lb | 60 in | 28 mm | 9.875 in | 36.5 in sleeve to sleeve |
| Body-Solid OB60B, 5 ft | 30 lb / 13.61 kg | 60 in | 30 mm | 9.75 in | 36.5 in |
Texas Power Bars' Original and Body-Solid's OB86C state 86 in, which is 2184.4 mm, or 15.6 mm under the IWF's 2200. Shafts run from 25 mm on Eleiko's women's bar to 30 mm on the Body-Solid and Maniak bars. On the bars of 86 in or more, the loadable sleeve runs from the Texas Power Bar Original's 15 in to the 433 mm of Eleiko's IPF bar, about 17.05 in. The four shorter bars state 9 to 11.25 in, so they hold fewer plates; see weight plate dimensions for thicknesses. CAP lists the same ECO bar in 5 foot and 6 foot options at 60 in and 72 in.
Olympic barbell length in inches and feet
"7 ft" is a nominal name. Seven feet is 84 in. The IWF men's bar is 86.61 in, which is 7 ft 2.61 in, and the women's bar is 79.13 in, which is 6 ft 7.13 in. Of the bars above, only CAP's is listed at 84 in. The 2 inch sleeve is nominal too: the IWF figure is 50 mm, which is 1.97 in, and York Barbell states on its 7 ft International Chrome Olympic Bar page that the sleeves are machined to 1.975 in, which is 50.165 mm, to take 2 inch plates.
To see whether a bar will sit on a rack, compare its between the collars figure with the rack's width across the outside of the uprights: the barbell length guide has a fit checker, and power rack dimensions lists rack widths.
1 inch standard bars are a different size
A 1 inch standard bar is made for 1 inch plates, not 2 inch plates. These are the three Signature Fitness 1 inch standard barbells BASALT sells.
| Signature Fitness 1 inch bar | Length | Weight | Plate space per side |
|---|---|---|---|
| 5 ft | 60 in | about 12.4 lb | 9 1/16 in |
| 6 ft | 70 15/16 in | about 14.5 lb | 13 1/8 in |
| 7 ft | 84 in | about 17.9 lb | 15 1/8 in |
We print no sleeve diameter and no load rating for these bars, and we have not checked whether their ends are threaded. Olympic vs standard barbell shows how to tell the two sizes apart, and is the cheap Olympic barbell really Olympic shows how to check a listing that uses the word.
Rogue and the makers we could not use
Rogue's product page refused our requests on 19 Nov 2026, so this page prints no Rogue figure. American Barbell's California Bar page and the two Vulcan Strength bar pages we opened gave no overall length or sleeve length in their text, so they are not in the table.
Short answers
How long is an Olympic barbell in inches?
86.61 in for the IWF men's bar, which is 2200 mm, and 79.13 in for the women's bar, which is 2010 mm. Among makers, Body-Solid's OB86C states 86 in and the Texas Deadlift Bar 92 1/2 in.
What are Olympic barbell dimensions in cm?
The IWF men's bar is 220 cm long, with 41.5 cm sleeves 5 cm across and a 131 cm grip section 2.8 cm across. The women's bar is 201 cm long, with 32 cm sleeves and a 2.5 cm grip.
What is the Olympic barbell length between the collars?
1310 mm, which is 51.57 in, on both IWF bars. The IPF allows 1.31 m to 1.32 m between the collar faces, and Body-Solid states 51.50 in for its OB86C.
How long is the sleeve on an Olympic bar?
415 mm, which is 16.34 in, on the IWF men's bar and 320 mm, 12.60 in, on the women's bar. Makers' bars of 86 in or more in our table state 15.62 in to 18 in.
Is a 7 ft Olympic bar exactly 7 feet long?
Not on the IWF figure: the men's bar is 86.61 in, 2.61 in more than 84 in. CAP lists its 7 foot Olympic ECO bar at 84 in.
Related: will a 7 ft bar fit your rack, power rack dimensions, Olympic vs standard barbell, is the cheap Olympic barbell really Olympic, how much does a barbell weigh, weight plate dimensions, and the plate calculator.
Sources
We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.
- Original Texas Power Bar, Texas Power Bars. Used for: Overall length 86 in; inside collar to inside collar 52 in; loadable sleeve length 15 in; weight 45 lbs. Checked .
- Texas Deadlift Bar, Texas Power Bars. Used for: Overall length 92 1/2 in; inside collar to inside collar 56 1/2 in; loadable sleeve length 15 1/2 in; weight 44 lb / 20 kg. Checked .
- IWF Technical and Competition Rules and Regulations 2024, International Weightlifting Federation (IWF), copy hosted by the Polish Weightlifting Federation. Used for: Men's bar: 20 kg, 220 cm long, sleeves 5 cm diameter and 41.5 cm long, grip section 2.8 cm diameter and 131 cm long, two 44.5 cm grip sections with a 0.5 cm smooth strip 19.5 cm from the inner sleeve, 12 cm centre knurling, blue marking, tolerance +0.1% to -0.05%. Women's bar: 15 kg, 201 cm, sleeves 5 cm by 32 cm, grip section 2.5 cm by 131 cm, grip sections 42 cm apart, yellow marking, same tolerance. Drawings: 2200, 415, 30, 1310, 195, 5, 245, 150, 120 mm (men) and 2010, 320, 30, 1310, 195, 5, 245, 420 mm (women). Collars 2.5 kg each. Checked .
- IPF Technical Rulebook 2026, sections 2.3 Bars and Discs and 2.4 Collars, International Powerlifting Federation. Used for: Total overall length not to exceed 2.2 m; 1.31 m to 1.32 m between the collar faces; bar diameter 28 mm to 29 mm; bar and collars 25 kg; sleeve diameter 50 mm to 52 mm; machined markings 81 cm apart; guideline drawing with 120 to 160 mm centre knurling; collars 2.5 kg each; no sleeve length printed; cover date 01.03.2026. Checked .
- SI Units: Length, National Institute of Standards and Technology. Used for: The inch is exactly 25.4 mm, the rule behind every mm to inch and inch to cm conversion on the page. Checked .
- Eleiko IWF Weightlifting Competition Bar, 20 kg, men: product sheet 3085893, Eleiko. Used for: Length 2200 mm / 86.61 in, weight 20 kg / 44.09 lbs, grip diameter 28 mm / 1.1 in. Checked .
- IWF Weightlifting Competition Bar, 20 kg, men, Eleiko. Used for: 415 mm loadable sleeve. Checked .
- Eleiko IWF Weightlifting Competition Bar, 15 kg, women: product sheet 3085894, Eleiko. Used for: Length 2010 mm / 79.13 in, weight 15 kg / 33.07 lbs, grip diameter 25 mm / 0.98 in. Checked .
- IWF Weightlifting Competition Bar, 15 kg, women, Eleiko. Used for: 320 mm loadable sleeve. Checked .
- Eleiko IPF Powerlifting Competition Bar, 20 kg: product sheet 3085900, Eleiko. Used for: Length 2200 mm / 86.61 in, weight 20 kg / 44.09 lbs, grip diameter 29 mm / 1.14 in. Checked .
- IPF Powerlifting Competition Bar, Eleiko. Used for: 433 mm loadable sleeve. Checked .
- Colorado Bar, 20kg, REP Fitness. Used for: Weight 20kg (44.1lbs), length 86.6 in, loadable sleeve length 16.1 in, shaft diameter 28.5mm. Checked .
- Compare All Bars, Texas Power Bars. Used for: Texas Power Bar Original: 44 lbs / 20 kg, 86 in, 28.5 mm shaft, 16 in loadable sleeves. Texas Power Bar Elite 20KG: 20 kg / 44 lbs, 86.50 in, 29 mm, 16.75 in. Texas Deadlift Bar: 44 lbs / 20 kg, 92.50 in, 27 mm, 18 in. Checked .
- Olympic bar HOME20 315kg bronze sleeve 20 kilos, Maniak Fitness. Used for: Weight 20 kg, total length 2200 mm, grip length 1315 mm, grip diameter 30 mm, loadable sleeve length 415 mm per side. Checked .
- OB86C 2 inch Olympic 7 ft Bar, Body-Solid. Used for: 86 in long, 44 lbs, 30 mm bar diameter, 51.50 in (ID) between collars, 15.75 in collar length in the list and 15.62 in sleeve length in the description. Checked .
- OB72B 6 ft Olympic Bar, Body-Solid. Used for: 72 in long, 40 lb / 18.14 kg, 30 mm bar diameter, 11.25 in sleeve length, inside sleeve dimensions 46 in. Checked .
- OB60B 2 inch Olympic 5 ft Bar, Body-Solid. Used for: 60 in long, 30 lb / 13.61 kg, 30 mm bar diameter, 9.75 in sleeve length, (ID) collars 36.5 in. Checked .
- CAP Olympic ECO Power Barbell Bar, CAP Barbell. Used for: Options listed as 84-in, 7-foot, 35-lb; 72-in, 6-foot; 60-in, 5-foot. No shaft diameter, sleeve length or between collars figure in the page text or its features picture. Checked .
- TITAN Series Shorty Olympic Barbell, Titan Fitness. Used for: Shaft diameter 28.5mm, overall length 72.75 in, loadable sleeve length 9 in, sleeve to sleeve length 54.25 in, product weight 14 KG (30 lb). Checked .
- 60 in Olympic Barbell, Titan Fitness. Used for: Grip diameter 28mm, overall length 60 in, loadable sleeve length 9.875 in, sleeve to sleeve length 36.5 in, product weight 25 lb. Checked .
- YORK 7 ft International Chrome Olympic Bar, 32mm, York Barbell. Used for: Sleeves are machined to a 1.975 in diameter to accommodate 2 in Olympic plates. Checked .
- American Barbell Cerakote California Bar, American Barbell. Used for: The page text gives no overall length or sleeve length, so the bar is not in the table. Checked .
- Vulcan 20kg Men's Training Olympic Bearing Barbell, Vulcan Strength. Used for: The page text gives no overall length or sleeve length, so the bar is not in the table. Checked .
- Vulcan Powerlifting Bar, Absolute V2.0, Vulcan Strength. Used for: The page text gives no overall length or sleeve length, so the bar is not in the table. Checked .
- How we measure, BASALT. Used for: Signature Fitness 1 inch bars 60, 70 15/16 and 84 in long, about 12.4, 14.5 and 17.9 lb, plate space per side 9 1/16, 13 1/8 and 15 1/8 in: our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Checked .