Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Trap Bar Weight

There is no standard trap bar weight. Across 20 trap and hex bar models from 7 makers, read on 18 Nov 2026, makers state from 15 kg, about 33.1 lb, to 38.5 kg, about 84.9 lb, without plates, and 9 of the 20 state 45 to 60 lb. The Army Fitness Test uses a 60 pound hex bar, about 27.2 kg. Find your own model's figure before you count your total.

Updated . By the BASALT editorial team.

There is no standard trap bar weight. The 20 trap and hex bar models from 7 makers whose pages we read on 18 Nov 2026 state from 15 kg, about 33.1 lb, to 38.5 kg, about 84.9 lb, and 9 of the 20 sit between 45 and 60 lb. The Army's fitness test uses a 60 pound hex bar. Every figure below is the maker's own; the conversions are ours. We weighed none of these bars.

Trap bar weight by model, in lb and kg

A trap bar, also sold as a hex bar or shrug bar, is a frame you stand inside, with handles at your sides. Here is what each maker states for the bar alone, without plates. Where a maker gives one unit, the other is our conversion at 0.4535924 kg to the pound.

Weights as each maker states them on its product page or product sheet, read 18 Nov 2026. Figures after "about" are our conversions. Open bars have one side of the frame left open so you can step in.
Maker and modelStated weightOther unit
Under 45 lb
Watson Shrug Bar, standard duty15 kgabout 33.1 lb
Maniak Fitness OPEN HEX BAR, 15 kg version15 kgabout 33.1 lb
Maniak Fitness OPEN HEX BAR, 19.5 kg version19.5 kgabout 43.0 lb
Titan Fitness Olympic Hex Weight Bar44 lbabout 20.0 kg
Watson Shrug Bar, power rack version20 kgabout 44.1 lb
Maniak Fitness HEX BAR, open20 kgabout 44.1 lb
45 to 60 lb
Body-Solid Olympic Trap Bar OTB5045 lb / 20.41 kg
Watson Dual Grip Shrug Bar22 kgabout 48.5 lb
Body-Solid OTB50RH, raised handles50 lb / 22.68 kg
Maniak Fitness HEX BAR, closed23 kgabout 50.7 lb
Eleiko Öppen Bar, black25 kg / 55.12 lbs
Eleiko Öppen Deadlift Bar, black25 kg / 55.12 lbs
Body-Solid Open Trap Bar OTB10058 lb product weightabout 26.3 kg
Vulcan Strength Prime Hex Trap Bar60 lbabout 27.2 kg
Sorinex Diamond Bar, single handle60 lbabout 27.2 kg
Over 60 lb
Watson Shrug Bar, heavy duty30 kgabout 66.1 lb
Vulcan Strength Open Hex Bar (OX Bar)31 kg (68 lbs)
Sorinex Diamond Bar, double handle70 lbabout 31.8 kg
Vulcan Strength High Hex Trap and Dead Lift Bar75 lbabout 34.0 kg
Watson Open Ended Shrug Bar38.5 kgabout 84.9 lb

Of these 20 models, 6 state less than 45 lb, 9 state 45 to 60 lb and 5 state more than 60 lb. The two middle figures are 23 kg and 25 kg, about 50.7 and 55.1 lb. Body-Solid's OTB100 page gives two figures, a 58 lb product weight and a 67 lb, or 30.39 kg, assembled weight; we list the first. Counted at 67 lb, it would join the over 60 lb group. Guessing a trap bar's weight can be off by more than 20 lb, so find your model's figure.

Length, sleeve space and handle height

Length decides where the bar fits, the loadable sleeve how many plates go on, and the handle height how far you pull. Makers measure handles from different points, so read the last column as each words it.

As each maker states them, read 18 Nov 2026. "Not stated" means we did not find the figure on the page or sheet we opened. Inch and millimeter pairs are the maker's own.
ModelOverall lengthLoadable sleeveSleeve diameterHandle height, as stated
Titan Olympic Hex Weight Bar56 in9.75 in48 mmRaised handles 6 in from the floor
Body-Solid OTB50 and OTB50RH56 in9.75 inNot statedNot stated
Body-Solid OTB100, open73 in, labeled width in its table16.25 inFits 2 inch platesHigh and low handles, heights not stated
Vulcan Prime Hex Trap Bar85 in16 in50 mmNot stated
Vulcan High Hex Trap and Dead Lift Bar82 in16 inNot stated8.5 in, floor to top of handle
Vulcan Open Hex Bar (OX Bar)84 in15.5 in50 mmHigh 9.5 in, low 6.5 in, to the floor with plates loaded
Eleiko Öppen Bar1959 mm / 77.13 in320 mm / 12.6 in50 mmTwo heights, 98 mm / 3.86 in apart
Eleiko Öppen Deadlift Bar1960 mm / 77.17 in415 mm / 16.34 inNot statedNot stated
Sorinex Diamond Bar86.625 in16 in sleeve lengthNot statedRaised handle height 6 in
Maniak HEX BAR, closed and open1425 mm closed, 1420 mm open245 mm50 mmHandle elevation 105 mm
Maniak OPEN HEX BAR, 15 and 19.5 kg2120 mm and 2230 mm340 mm and 420 mm50 mmHeight 170 and 245 mm, not defined
Watson Shrug Bar1600 x 770 mm, not given by versionLoading pins 330 mm standard duty, 400 mm heavy dutyTakes 50 mm Olympic platesNot stated

Length varies widely. Titan's and Body-Solid's closed bars are 56 inches long with 9.75 inch sleeves, while Vulcan's and Sorinex's run 82 to 86.625 inches with 15.5 to 16 inch sleeves: a short bar fits a smaller room but holds fewer plates. Every page above that states a sleeve or plate size gives 48 or 50 mm sleeves or 2 inch plates, so a 1 inch plate will not go on. And a raised handle shortens the pull: Vulcan's OX Bar handles sit 9.5 or 6.5 inches from the floor.

Eleiko states the Öppen Bar can be used in racks with an inner distance between uprights of 1045 mm, or 41.14 in. Our barbell length guide shows how to measure a room and rack for a long bar.

Why trap bar weights differ so much

The makers' own lines show what adds weight:

The Army hex bar weight

The Army's own page for the Army Fitness Test, which it says replaced the Army Combat Fitness Test on June 1, 2025, lists the equipment for the 3 repetition maximum deadlift as a "60-pound hex bar and plates". That is about 27.2 kg. The Soldier deadlifts the most weight possible for three continuous repetitions. The page gives no tolerance, length or handle height for the bar. Two models in our table state 60 lb, Vulcan's Prime Hex Trap Bar and Sorinex's single handle Diamond Bar; neither page we read says the Army uses or approves it.

Rogue and the makers we could not read

Rogue's product pages refused our requests on 18 Nov 2026, so this page gives no Rogue figure rather than one copied from a retailer or review. REP Fitness's trap bar page, Bells of Steel's hex trap bar page and Titan Fitness's rackable hex trap bar page also refused or rate limited us that day. If you own one of these bars, check the maker's product page, or weigh it as below.

Counting the bar, and loading it

The bar counts toward what you lift. A 60 lb hex bar with a 45 lb plate on each side is 150 lb. A 25 kg Eleiko Öppen Bar with a 20 kg plate on each side is 65 kg. The plate calculator has an "Another Olympic bar: enter its weight" choice, so enter your trap bar's stated figure instead of a 20 kg barbell's.

  1. No figure? Weigh yourself on a bathroom scale, then again holding the bar, and subtract. Our how to weigh your weights guide covers the method and its limits.
  2. Check the sleeve. Stack the plates you plan to load and compare the stack with the loadable sleeve. In our weight plate dimensions guide, York's and Body-Solid's 45 lb iron plates are 1 1/2 inches thick, so on paper six fit on a 9.75 inch sleeve, leaving 0.75 inch, and a seventh does not.

For comparison, the Signature Fitness 1 inch bars we sell weighed about 12.4 lb (5 ft), 14.5 lb (6 ft) and 17.9 lb (7 ft) on our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry, and take 1 inch plates. The how much does a barbell weigh guide compares trap bars with every other bar type.

Short answers

How much does a trap bar weigh without plates?

It depends on the model: the 20 we read state from 15 kg, about 33.1 lb, to 38.5 kg, about 84.9 lb. 9 of the 20 state 45 to 60 lb, and the two middle figures are 23 kg and 25 kg.

How much does a trap bar weigh in kg?

From 15 kg to 38.5 kg in the makers' figures we read. Eleiko's Öppen bars state 25 kg, Maniak's closed HEX BAR 23 kg, and Watson's shrug bars 15, 20 or 30 kg by version.

How much does the Army hex bar weigh?

60 pounds, about 27.2 kg. The Army's Army Fitness Test page lists a "60-pound hex bar and plates" for the 3 repetition maximum deadlift.

Is a trap bar 45 lb like a barbell?

Only some are. Body-Solid's OTB50 states 45 lb and Titan's Olympic Hex Weight Bar 44 lb, but other models we read state anywhere from 15 kg to 38.5 kg, so count your own bar's figure.

Related: how much does a barbell weigh, Smith machine bar weight, weight plate dimensions, do standard plates fit an Olympic bar, how to weigh your weights, the plate calculator, and the one rep max calculator.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. Army Fitness Test, U.S. Army. Used for: The AFT replaced the Army Combat Fitness Test on June 1, 2025; the 3 Repetition Maximum Deadlift uses a 60-pound hex bar and plates; deadlift the maximum weight possible, three continuous repetitions. Checked .
  2. NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically, NIST. Used for: Pound (avoirdupois) to kilogram factor 0.4535924, behind every converted lb and kg figure (about 33.1 lb, 27.2 kg and so on). Checked .
  3. 2" Olympic Shrug Bar OTB50, Body-Solid. Used for: 45 lb / 20.41 kg; 56 in length; 9.75 in loadable sleeve space. Checked .
  4. 2" Olympic Shrug Bar with Raised Handles OTB50RH, Body-Solid. Used for: 50 lb / 22.68 kg; 56 in length; 9.75 in loadable sleeve space. Checked .
  5. Open Trap Bar OTB100, Body-Solid. Used for: 58 lbs product weight and 67 lb / 30.39 kg assembled weight; 73.00 in listed as width in its table; 16.25 in plate sleeves; fits 2 in Olympic plates; dual high and low handles, heights not stated. Checked .
  6. Prime Hex Trap Bar, Vulcan Strength. Used for: Barbell weight 60 lbs; total length 85 in; loadable sleeve 16 in; sleeve diameter 50 mm; no handle height stated. Checked .
  7. High Hex Trap and Dead Lift Bar, Vulcan Strength. Used for: Weight 75 lb; length 82 in; loadable length 16 in; 8.5 in from floor to top of handle. Checked .
  8. Open Hex Bar (OX Bar), Vulcan Strength. Used for: 31 kilograms (68 lbs); total length 84 in; loadable sleeve 15.5 in; sleeve diameter 50 mm; high handles 9.5 in and low handles 6.5 in to the floor with plates loaded. Checked .
  9. Eleiko Öppen Bar, black, product sheet (3085748-03), Eleiko. Used for: 25 kg / 55.12 lbs; length 1959 mm / 77.13 in; loadable sleeve 320 mm / 12.6 in; 50 mm sleeve diameter; handles 98 mm / 3.86 in apart vertically; rack inner distance between uprights 1045 mm / 41.14 in. Checked .
  10. Eleiko Öppen Deadlift Bar, black, product sheet (3085153-03), Eleiko. Used for: 25 kg / 55.12 lbs; length 1960 mm / 77.17 in; loadable sleeve 415 mm / 16.34 in. Checked .
  11. Diamond Bar, Sorinex. Used for: 60 lb single handle, 70 lb double; overall length 86.625 in; sleeve length 16 in; raised handle height 6 in. Checked .
  12. Shrug Bar, Watson. Used for: 15 kg standard duty with 25 mm handles and 330 mm loading pins; 20 kg power rack version; 30 kg heavy duty with 30 mm handles and 400 mm loading pins; 1600 mm x 770 mm; takes 50 mm Olympic plates. Checked .
  13. Dual Grip Shrug Bar, Watson. Used for: 22 kg. Checked .
  14. Open Ended Shrug Bar, Watson. Used for: 38.5 kg. Checked .
  15. HEX BAR, Maniak hexagonal bar, Maniak Fitness. Used for: 23 kg closed and 20 kg open; overall length 1425 mm and 1420 mm; 50 mm sleeves; 245 mm loadable sleeve; handle elevation 105 mm. Checked .
  16. OPEN HEX BAR, Maniak Fitness. Used for: 15 kg and 19.5 kg versions; overall length 2120 mm and 2230 mm; loadable sleeve 340 mm and 420 mm; height 170 mm and 245 mm; 50 mm sleeves. Checked .
  17. Olympic Hex Weight Bar, Titan Fitness. Used for: Product weight 44 lb; overall length 56 in; loadable sleeve 9.75 in; sleeve diameter 48 mm; raised handles stand 6 in from the floor. Checked .
  18. How we measure, BASALT. Used for: Our Signature Fitness 5, 6 and 7 ft bars weighed about 12.4, 14.5 and 17.9 lb, a preliminary check. Checked .
  19. Weight Plate Dimensions, BASALT. Used for: York's and Body-Solid's 45 lb iron Olympic plates are 1 1/2 in thick (makers' figures read 17 Nov 2026). Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.