Weight Bench Dimensions
On seven home benches from REP Fitness, Titan Fitness, Body-Solid and Marcy, the height the maker states is 16.5 to 20 inches (41.9 to 50.8 cm). Where a pad width is given it is 9.5 to 15 inches, and the benches are 14 to 28 inches wide and 41 to 70 inches long overall. For competition, the IPF sets the pad at 42 to 45 cm high, 29 to 32 cm wide and at least 1.22 m long.
On the seven home benches we read from REP Fitness, Titan Fitness, Body-Solid and Marcy, the height the maker states runs from 16.5 to 20 inches (41.9 to 50.8 cm), the overall width from 14 to 28 inches (35.6 to 71.1 cm) and the length from 41 to 70 inches (104.1 to 177.8 cm). Where a pad width is given, it runs from 9.5 to 15 inches. For competition, the IPF sets the pad at 42 to 45 cm high, 29 to 32 cm wide and at least 1.22 m long. Every bench figure below is the maker's own, read on 18 Nov 2026; the centimeter conversions are ours. We measured none of these benches.
Flat bench dimensions
A flat bench has one pad, so its height, width and length describe the surface you lie on. Makers label these figures differently. REP Fitness prints a bench height, Body-Solid a height to the pad, and Titan Fitness and Marcy an overall height. Only Body-Solid says outright that its figure is to the pad, so the table keeps each maker's label.
| Bench | Height | Pad width | Pad length | Overall length by width |
|---|---|---|---|---|
| REP Fitness FB-5000 Competition Flat Bench | 16.9 in (42.9 cm), bench height | 12 in (30.5 cm); wide pad 13.75 in (34.9 cm) | 48 in (121.9 cm) | 50.5 by 21 in (128.3 by 53.3 cm); footprint 7.36 sq ft |
| Titan Fitness TITAN Series Single Post Flat Bench | 17 in (43.2 cm), overall height | 14 in (35.6 cm) | 50 in (127 cm) | 50 by 26 in (127 by 66 cm) |
| Body-Solid GFB350B Flat Bench | 19 in (48.3 cm), height to pad; 20 in overall | 9.5 in (24.1 cm), stated as back pad | Not stated | 46 by 23 in (1168 by 584 mm) |
| Marcy SB-315 Utility Flat Bench | 16.5 in (41.9 cm), overall height | Not stated | Not stated | 41 by 14 in (104.1 by 35.6 cm) |
Two things stand out. The pads differ more than the heights: Body-Solid's GFB350B pad is 9.5 inches wide and Titan's is 14, a difference of 4.5 inches. And the overall width is well over the pad width, because the frame below is wider than the pad: Titan's bench is 26 inches wide overall on a 14 inch pad, and REP's is 21 inches on a 12 inch pad. REP says its FB-5000 uses a three-legged base so the legs stay "out of the way of the lifter's foot placement".
Adjustable bench dimensions
An adjustable bench has a back pad and a separate seat pad, with a small gap where they meet.
| Bench | Height | Pad width, back and seat | Pad length, back and seat | Overall length by width |
|---|---|---|---|---|
| REP Fitness AB-3000 2.0 | 17.1 in (43.4 cm), bench height | 11.8 in (30 cm) and 15 in (38.1 cm) | 36 in (91.4 cm) and 15 in (38.1 cm), with a 2.1 in (5.3 cm) gap | 56.6 by 25.8 in (143.8 by 65.5 cm); footprint 9.85 sq ft |
| Titan Fitness TITAN Series Adjustable Bench | 17 in (43.2 cm), bench height | 12 in (30.5 cm) and 12 in (30.5 cm) | 40 in (101.6 cm) and 12 in (30.5 cm) | 56.5 by 24.75 in (143.5 by 62.9 cm) |
| Body-Solid GFID71B | 20 in (50.8 cm), height to pad; 19 in (483 mm) overall | Not stated | Not stated | 70 by 28 in (1778 by 711 mm) |
Body-Solid's GFID71B page gives a 20 inch height to the pad "at position", without saying which position, and a 19 inch overall height; we print both as stated. REP states a 3 percent tolerance on its figures, about half an inch either way on a 16.9 inch bench by our arithmetic. Measure a bench you own rather than trust one printed figure.
The competition rule: IPF bench height and width
Powerlifting's international federation, the IPF, sets bench dimensions in section 2.6 of its Technical Rulebook, effective 1 March 2026. The bench must be:
- Length: not less than 1.22 m (about 48 inches), "flat and level".
- Width: not less than 29 cm and not more than 32 cm (about 11.4 to 12.6 inches).
- Height: not less than 42 cm and not more than 45 cm (about 16.5 to 17.7 inches), measured from the floor to the top of the pad "without it being depressed or compacted".
- Bar rests: adjustable from 75 to 110 cm, floor to bar rest, at least 1.10 m apart on the inside. The head of the bench sits 22 cm beyond the center of the uprights, give or take 5 cm.
Only benches from manufacturers registered and approved by the IPF's Technical Committee may be used at international championships, so matching the numbers is not approval. Against the height and width limits, on the makers' printed figures:
| Bench | Height against 42 to 45 cm | Pad width against 29 to 32 cm |
|---|---|---|
| REP FB-5000 | 42.9 cm, inside | 30.5 cm, inside; wide pad 34.9 cm, over |
| Titan TITAN Series flat | 43.2 cm overall, inside | 35.6 cm, over |
| Body-Solid GFB350B | 48.3 cm, over | 24.1 cm, under |
| Marcy SB-315 | 41.9 cm overall, just under | Not stated |
| REP AB-3000 2.0 | 43.4 cm, inside | 30 cm, inside |
| Titan TITAN Series adjustable | 43.2 cm, inside | 30.5 cm, inside |
| Body-Solid GFID71B | 50.8 cm to pad at an unnamed position, 48.3 cm overall; both over | Not stated |
REP describes the FB-5000 as "designed to meet the International Powerlifting Federation's height standards", a claim about height only; its 48 inch pad is 121.9 cm, a hair under the 1.22 m minimum on paper. If you train for meets, measure your pad height unloaded against the 42 to 45 cm range.
Why pad height matters for leg drive and rack height
In a bench press your feet push against the floor, and the IPF rule wants them flat, "as flat as the shape of the shoe will allow". Pad height sets where your hips sit relative to your feet, so a lifter with shorter legs may not get both feet flat on a 19 or 20 inch bench, while a taller lifter on a 16.5 inch bench may find the knees come up high.
To "achieve firm footing", the IPF lets lifters build up the floor with flat plates or blocks no more than 30 cm high and at least 60 by 40 cm, and asks international competitions to have blocks of 5, 10, 20 and 30 cm available. At home, if your heels lift, put a stable plate or block of the same height under each foot.
Pad height also moves the bar. A higher pad lifts your chest, so the J-hooks have to go up with it: between the Marcy SB-315 at 16.5 inches overall and the Body-Solid GFB350B at 19 inches to the pad, the stated heights differ by 2.5 inches. When you change benches, reset the hooks so you unrack with your arms a little bent, without pressing the bar up out of the hooks or reaching for it.
How to check a bench fits your rack
A bench runs front to back through a power rack, so two rack dimensions matter: the inside width, for the bench's widest point, and the inside depth, for the part of the bench between the uprights. Titan's T-3 Series Power Rack page gives an inside width of 42 inches, an inside depth of 24 inches and an outside depth of 30 inches.
- Width. Take the bench's overall width, its widest point, which can be the base rather than the pad. Every bench in our tables, at 14 to 28 inches, is narrower than the T-3's 42 inches inside.
- Depth. With the bar on the front uprights' J-hooks and your eyes under the bar, the head end of the bench sits inside the rack. A 50 inch flat bench is longer than a 24 inch inside depth, so the rest sticks out the front. Check that the pad from where your head rests to the head end fits inside the depth without touching the rear uprights or a crossmember.
- Footprint. Tape out the rack's inside width and depth on the floor, mark the bench's full length through it, and check for parts at floor level. The adjustable benches we read are 56.5 to 70 inches long, so check the front end clears a wall.
Our power rack dimensions guide lists the inside width and depth of several home racks, and the apartment home gym guide has a space planner for the room around them.
Short answers
How tall is a weight bench?
On the seven benches we read, 16.5 to 20 inches (41.9 to 50.8 cm), as each maker states it. REP's FB-5000 is 16.9 inches, Titan's two benches 17, and Body-Solid's GFB350B 19 inches to the pad. The IPF competition rule asks for 42 to 45 cm, about 16.5 to 17.7 inches.
How wide is a weight bench?
Pads run from 9.5 inches on Body-Solid's GFB350B to 14 inches on Titan's flat bench, and 15 inches on REP's AB-3000 seat. Overall, the benches are 14 to 28 inches wide. The IPF sets the pad at 29 to 32 cm, about 11.4 to 12.6 inches.
How long is a weight bench?
The flat benches we read are 41 to 50.5 inches long and the adjustable ones 56.5 to 70 inches. The IPF requires a flat, level length of at least 1.22 m, about 48 inches.
Will a weight bench fit inside a power rack?
It will fit across the rack if its overall width is less than the rack's inside width, 42 inches on Titan's T-3. None of the benches we read would fit lengthwise in a 24 inch deep rack, and it does not need to: the bench sticks out the front, and only the head end has to clear the rear uprights.
Related: power rack dimensions, apartment home gym, will a 7 ft bar fit your rack, weight plate dimensions, beginner barbell weights, and the one rep max calculator; also squat rack vs power rack.
Sources
We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.
- IPF Technical Rulebook, effective 1 March 2026 (v3), International Powerlifting Federation. Used for: Section 2.6 Bench: length not less than 1.22 m, flat and level; width 29 to 32 cm; height 42 to 45 cm floor to top of pad, not depressed or compacted; uprights 75 to 110 cm floor to bar rest; at least 1.10 m between insides of bar rests; head of bench 22 cm beyond center of uprights, tolerance 5 cm; only benches from registered and approved manufacturers at international championships. Section 4.2 Bench press: feet flat on the floor as flat as the shape of the shoe will allow; plates or blocks not exceeding 30 cm total height, minimum 60 by 40 cm, to achieve firm footing; blocks of 5, 10, 20 and 30 cm should be made available for foot placement at all international competitions.. Checked .
- FB-5000 Competition Flat Bench, REP Fitness. Used for: Bench height 16.9 in; bench width 21 in; bench length 50.5 in; pad width 12 in; wide pad width 13.75 in; pad length 48 in; footprint 7.36 sq ft; tolerance 3%; 'designed to meet the International Powerlifting Federation's height standards'; tripod legs 'out of the way of the lifter's foot placement'.. Checked .
- AB-3000 2.0 FID Adjustable Bench, REP Fitness. Used for: Bench height 17.1 in; bench width 25.8 in; bench length 56.6 in; back pad length 36 in; back/seat pad width 11.8 in/15 in; seat pad length 15 in; pad gap 2.1 in; footprint 9.85 sq ft; tolerance 3%.. Checked .
- TITAN Series Single Post Flat Bench, Titan Fitness. Used for: Overall height 17 in; overall length 50 in; overall width 26 in; pad length 50 in; pad width 14 in.. Checked .
- TITAN Series Adjustable Bench, Titan Fitness. Used for: Bench height 17 in; overall length 56.5 in; overall width 24.75 in; back pad 40 by 12 in; seat pad 12 by 12 in; stored upright footprint 24.75 in (W) by 17 in (D).. Checked .
- GFB350B Flat Bench, Body-Solid. Used for: Height to pad, flat position, 19 in; back pad 9.5 in wide; product dimensions 46 in L by 23 in W by 20 in H (1168 by 584 by 508 mm).. Checked .
- GFID71B Flat Incline Decline Bench, Body-Solid. Used for: Height to pad 'at position' 20 in, position not named; product dimensions 70 in L by 28 in W by 19 in H (1778 by 711 by 483 mm).. Checked .
- Utility Flat Bench SB-315, Marcy. Used for: Assembled dimensions 41 in L by 14 in W by 16.5 in H.. Checked .
- T-3 Series Power Rack 82" 24", Titan Fitness. Used for: Inside width 42 in; inside depth 24 in; outside depth 30 in (rack fit example).. Checked .