Fractional Plates
Fractional plates are small plates for adding less than the 5 lb a pair of 2.5 lb plates adds. A pair adds twice one plate's weight, so two 1/2 lb plates add 1 lb. Sets read on 20 Nov 2026 run from 1/4 lb to 1 lb at REP Fitness and Micro Gainz. Check the hole first: REP's set fits 2 inch Olympic bars, while Micro Gainz sells a set with a 1.05 inch hole for 1 inch bars.
Fractional plates are small plates for adding less to a bar than the 5 lb a pair of 2.5 lb plates adds, though Titan Fitness uses the name for plates up to 10 lb. On the makers' pages we read on 20 Nov 2026, the smallest are 1/4 lb at REP Fitness and Micro Gainz and 0.125 kg at Strength Shop. A pair adds twice one plate's weight, so two 1/2 lb plates add 1 lb. Check the hole first: three of the 13 products below are for a 1 inch bar. Figures are the makers' or a rule book's; the arithmetic is ours. We weighed none of these plates.
Fractional plates, change plates and microplates
The names overlap, and neither rule book we read uses them. REP Fitness sells a "Fractional Plate Set" of 1/4 to 1 lb plates and separate "Change Plates" of 1.25 to 10 lb. Titan Fitness calls its 1.25 to 10 lb plates both change plates and "these fractional plates". American Barbell calls its 0.5 to 5 kg plates fractional; Eleiko calls that range change plates. Micro Gainz says "micro plates". Read the weights, not the name.
Fractional plate sets by maker
| Maker and product | Plates | Hole or fit, as stated | Material | Stated weight tolerance |
|---|---|---|---|---|
| REP Fitness Fractional Plate Set (LB) | One pair each: 1/4, 1/2, 3/4, 1 lb | Olympic 2 inch bars | Steel, powder coated | 3% |
| Micro Gainz Olympic Size set | Two each: 1/4, 1/2, 3/4, 1 lb | 2 inch Olympic bars | Sintered metal | +/- 5 g |
| Micro Gainz Standard 1-Inch set | Two each: 1/4, 1/2, 3/4, 1 lb | 1.05 inch hole, 1 inch bars | Sintered steel | +/- 10 g |
| Bells of Steel Fractional Iron Plates | Eight 0.5 lb plates | 52 mm hole, Olympic bars | Cast iron | +/- 16 g |
| Fringe Sport Ouroboros Fractional Plate | 0.5 lb or 1 lb pairs | Not given | Synthetic rubber | +/- 1% |
| Strength Shop Fractional Steel Plates | 0.125, 0.25, 0.5, 0.75, 1 kg, sold singly | 2 inch Olympic sleeve | Steel | Not given |
| Eleiko IPF Powerlifting Competition Plate | .25 kg to 5 kg | Not given | Calibrated steel | Not given |
| Eleiko IWF Change Plate RC | .5 kg to 5 kg | Not given | Rubber coated | -0/+10 g |
| American Barbell KG Urethane Fractional Plates | 0.5, 1, 1.5, 2, 2.5, 5 kg pairs | Not given | Urethane | Not given |
| REP Fitness Change Plates (LB) | 1.25, 2.5, 5, 10 lb | Olympic 2 inch bars | Rubber coating, metal insert | 1% |
| Titan Fitness 37.5 LB Set Black Change Plates | Pairs of 1.25, 2.5, 5, 10 lb | 51 mm opening, +/- 0.2 mm | Rubber, steel insert | Not given |
| York Barbell 1 inch Standard Flat Pro | From 1.25 lb | 1 inch standard; no hole figure | Cast iron | Not given |
| Body-Solid RPB Standard Plates | From 1.25 lb | 1 inch hole | Cast iron | Not given |
What a tolerance means on a plate this small
A tolerance in grams is a larger share of a small plate. At NIST's 0.4535924 kg to the pound, a 1/4 lb plate is about 113 g and a 1/2 lb plate about 227 g. Bells of Steel's +/- 16 g is about 7 percent of its 0.5 lb plate. Micro Gainz's +/- 10 g is about 8.8 percent of a 1/4 lb plate, and its Olympic set's +/- 5 g about 4.4 percent. REP's 3% of a 1/4 lb plate is about 3.4 g. Against a loaded bar these are small: 16 g is about 0.035 lb. Our how to weigh your weights guide covers checking plates at home, and are weight plates accurate covers full size plates.
The arithmetic of small jumps
A pair adds twice one plate's weight. The jump's share of the lift is the weight added, divided by the weight already on the bar, times 100.
| Plate on each side | Pair adds | Share at 50 lb | At 100 lb | At 200 lb | At 300 lb |
|---|---|---|---|---|---|
| 1/4 lb | 0.5 lb | 1% | 0.5% | 0.25% | 0.17% |
| 1/2 lb | 1 lb | 2% | 1% | 0.5% | 0.33% |
| 1 lb | 2 lb | 4% | 2% | 1% | 0.67% |
| 1.25 lb | 2.5 lb | 5% | 2.5% | 1.25% | 0.83% |
| 2.5 lb | 5 lb | 10% | 5% | 2.5% | 1.67% |
The same 5 lb is 10% of a 50 lb lift and 1.67% of a 300 lb one. In kilograms, a pair of 0.5 kg plates adds 1 kg, about 2.2 lb, and a pair of 0.125 kg plates adds 0.25 kg, about 0.55 lb.
The REP and Micro Gainz sets hold four pairs. All four together add 5 lb, and combining them makes every 0.5 lb step up to that: 1 lb plus 1/4 lb a side adds 2.5 lb. Bells of Steel's eight 0.5 lb plates make jumps of 1, 2, 3 or 4 lb.
Whether smaller jumps build strength faster is a research question this page does not answer.
Our plate calculator works out the main load for each side. Its plate menus stop at 1.25 lb for 1 inch bars, 2.5 lb for Olympic bars in pounds and 1.25 kg in kilograms, so add your fractional pair on top of its answer. The kg to lbs lifting chart converts kilogram loads.
Which fit a 1 inch bar and which need a 2 inch sleeve
The hole decides. Three products in the table are for 1 inch bars:
- Micro Gainz Standard 1-Inch set. Center hole 1.05 inch. Micro Gainz says it fits standard 1 inch barbells and "will not work with larger diameter bars". It is the only 1 inch product we read with plates under 1.25 lb.
- York Barbell 1 inch Standard Flat Pro. The smallest is 1.25 lb, 3 7/8 in across and 1/2 in thick.
- Body-Solid RPB. The smallest is 1.25 lb, 4 in across and 0.4 in thick.
The REP, Bells of Steel, Titan, Strength Shop and Micro Gainz Olympic Size products are stated for 2 inch Olympic bars or have 51 or 52 mm holes. A hole made for a 2 inch sleeve is about twice as wide as a 1 inch sleeve, so those plates do not sit snugly on a 1 inch bar. Our bar and plate fit guide covers adapter sleeves, and the weight plate dimensions guide lists hole and sleeve figures.
The Signature Fitness 5, 6 and 7 ft bars we sell are 1 inch bars. By Micro Gainz's thickness figures, one plate of each size from its 1 inch set stacks to about 1.67 in per side. The plate space per side on our bars is 9 1/16 in (5 ft), 13 1/8 in (6 ft) and 15 1/8 in (7 ft): our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. We have not tried these plates on our bars.
Fractional plates for dumbbells
Three kinds turned up on the pages we read:
- Clamp-on plates. Micro Gainz's dumbbell plate is "designed to clamp onto the handle of most dumbbells". Each weighs 1.25 pounds, is 4.25 in across and 3/8 in thick, and is stated accurate to +/- 10 grams. Micro Gainz says to add up to 2 plates to a dumbbell, and also lists 1, 2.5 and 3.75 lb versions.
- Magnetic add-ons. PlateMate's 1.25 lb Donut pair is two magnetic weights of 1.25 lbs each, 4.5 in across. PlateMate says the magnets "must make direct contact with iron or steel", will not stick to dumbbells coated with rubber, urethane, neoprene or vinyl, and suit 25 lb dumbbells or heavier.
- Plates on a loadable handle. The hole has to match the handle, as on a bar. Strength Shop says its fractional plates fit a 2 inch dumbbell sleeve; for 1 inch handles see our spinlock dumbbell handles guide.
The share rule works per dumbbell. One 1.25 lb add-on on a 25 lb dumbbell is 5 percent, and two are 10 percent. Going from a 25 lb dumbbell to a 30 lb one is 20 percent. The dumbbell sizes chart shows the steps makers sell.
The smallest discs in the IWF and IPF rule books
- IWF weightlifting. The rules list competition discs of 0.5, 1, 1.5, 2 and 2.5 kg below the 5 kg disc. The barbell must always be a multiple of 1 kg, and a record must exceed the old one by at least 1 kg. A pair of 0.5 kg discs is that 1 kg. A 0.5 kg disc is at most 1.6 cm wide and 9.7 to 13.7 cm across, and discs of 5 kg and under must weigh from 0 g under to 10 g over. The Jury decides whether the 2, 1.5, 1 and 0.5 kg discs go inside or outside the collars.
- IPF powerlifting. Discs run from 1.25 kg to 25 kg, and the barbell must always be a multiple of 2.5 kg, which is a pair of 1.25 kg discs. Lighter discs are for records only: a record attempt must be at least 0.5 kg over the current record. The tolerance table goes down to a 0.25 kg disc, which must weigh 0.245 to 0.255 kg; a 0.5 kg disc must weigh 0.49 to 0.51 kg.
Our weight plate colors guide has the color each small disc carries.
Short answers
What are fractional plates?
They are small plates for adding less than 5 lb to a bar. The sets we read from REP Fitness and Micro Gainz hold pairs of 1/4, 1/2, 3/4 and 1 lb plates, and a pair adds twice one plate's weight.
Do fractional plates fit a 1 inch barbell?
Only those made with a 1 inch hole. Micro Gainz sells a set with a 1.05 inch center hole for standard 1 inch barbells, while the REP, Bells of Steel and Titan plates are for Olympic bars.
Can you use fractional plates on dumbbells?
Yes, with add-ons made for dumbbells. Micro Gainz sells 1.25 lb plates that clamp onto the handle, and PlateMate sells 1.25 lb magnets that need direct contact with iron or steel.
Are there rubber fractional plates?
Yes. Fringe Sport's Ouroboros plates are synthetic rubber in 0.5 lb and 1 lb, with a stated tolerance of +/- 1%. REP's and Titan's rubber change plates start at 1.25 lb.
Related: what weight plates do I need, weight plate dimensions, do standard plates fit an Olympic bar, kg to lbs lifting chart, and the plate calculator.
Sources
We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.
- Fractional Plate Set (LB), REP Fitness. Used for: Sold as a full set with one pair each of 1/4, 1/2, 3/4 and 1 lb; steel with powder coating; fits all Olympic 2 inch barbells; 3% weight tolerance; the names Fractional Plate Set and Fractional Change Plate Set. Checked .
- Change Plates (LB), REP Fitness. Used for: 1.25, 2.5, 5 and 10 lb increments; metal insert that fits Olympic 2 inch barbells; rubber coating; sold in pairs or as a full set; 1% weight tolerance; the name Change Plates. Checked .
- 37.5 LB Set Black Change Plates, Titan Fitness. Used for: Set of 1.25, 2.5, 5 and 10 LB pairs; collar opening 51 mm +/- 0.2 mm; rubber with steel insert; the page calls them change plates and 'these fractional plates'; no weight tolerance in the page text. Checked .
- Fractional Iron Plates, 0.5 LB (set of 8), Bells of Steel. Used for: Set of eight 0.5 lb plates; cast iron; fit Olympic barbells; +/-16 gram weight tolerance; 52 mm center hole; increments of 1 to 4 lb. Checked .
- Micro Gainz Olympic Size Fractional Weight Plates Set of 8 Plates .25LB-1LB w/ Bag, Micro Gainz. Used for: 8 plates, two each of .25, .50, .75 and 1 lb; sintered metal; accurate to +/- 5 grams; fits 2 inch Olympic weight lifting bars; the term micro plates. Checked .
- Micro Gainz Standard 1-Inch Center Hole Fractional Weight Plates Set of 8 Plates .25LB-1LB w/ Bag, Micro Gainz. Used for: 8 plates, two each of .25, .50, .75 and 1 lb; sintered steel; center hole 1.05 inch; fits standard 1 inch barbells and will not work with larger diameter bars; accurate to +/- 10 grams; thicknesses .1674, .3348, .5023 and .6697 inch behind the 1.67 in stack figure. Checked .
- Micro Gainz 1.25LB Dumbbell Fractional Weight Plate, Micro Gainz. Used for: Each plate weighs 1.25 pounds; add up to 2 plates to a dumbbell; designed to clamp onto the handle of most dumbbells; 4.25 in diameter, 3/8 in thick; accurate to +/- 10 grams; 1, 2.5 and 3.75 lb dumbbell plates also listed. Checked .
- Ouroboros Fractional Plate, Fringe Sport. Used for: 0.5 lb and 1 lb, in pairs or a pair of each; synthetic rubber; weight tolerance +/-1%; no hole size in the page text. Checked .
- Fractional Steel Plates, Strength Shop. Used for: Weights 0.125, 0.25, 0.5, 0.75 and 1 kg; fits a 2 inch Olympic barbell or dumbbell sleeve; steel; price is for one plate, not a pair; no weight tolerance in the page text. Checked .
- American Barbell KG Urethane Fractional Plates, American Barbell. Used for: Available weights 0.5, 1, 1.5, 2, 2.5 and 5 kg, sold as pairs; urethane; called fractional plates; no hole size or weight tolerance in the page text. Checked .
- IWF Change Plate - 0.5 kg RC, Eleiko. Used for: Change plates range from .5 kg to 5 kg; rubber coated; calibrated to -0/+10 g; IWF certified; no hole size on the page. Checked .
- IPF Powerlifting Competition Plate - 0.5 kg, Eleiko. Used for: Plates range from .25 kg to 5 kg; calibrated steel; IPF certified; no hole size or tolerance figure on the page. Checked .
- 1" Standard Flat Pro Cast Iron Plate, York Barbell. Used for: Smallest plate 1.25 lb, 3 7/8 in diameter and 1/2 in thick; cast iron; sold as a 1 inch standard plate with no hole figure; no weight tolerance stated. Checked .
- RPB Cast Iron 1" Standard Plates, Body-Solid. Used for: Range from 1.25 to 50 lb; 1.25 lb plate 4 in by 0.4 in; 1 inch center hole; cast iron; no weight tolerance stated. Checked .
- 1.25 lb Donut PlateMate (Pair), PlateMate. Used for: Two donut-shaped magnetic weights of 1.25 lbs each; 4.5 in outer diameter; magnets must make direct contact with iron or steel and will not stick to dumbbells coated with rubber, urethane, neoprene or vinyl; for 25 lb dumbbells or heavier. Checked .
- IWF Technical and Competition Rules and Regulations 2024 (copy published by the Polish Weightlifting Federation), International Weightlifting Federation. Used for: Competition discs of 0.5, 1, 1.5, 2 and 2.5 kg below 5 kg (3.3.3.6); barbell always a multiple of 1 kg (6.6.2); a record exceeds the previous one by at least 1 kg (8.1); 0.5 kg disc at most 1.6 cm wide and 9.7 to 13.7 cm in diameter; discs of 5 kg and under from +10 g to -0 g; the Jury decides whether the 2, 1.5, 1 and 0.5 kg discs load inside or outside the collars (7.5.16); the rules do not use the words fractional, change plate or micro. Checked .
- IPF Technical Rulebook, effective 1 March 2026, International Powerlifting Federation. Used for: Discs within the range 1.25 kg to 25 kg; lighter discs for record purposes; barbell always a multiple of 2.5 kg; a record attempt at least 0.5 kg over the current record; tolerance table: 0.25 kg disc 0.245 to 0.255 kg, 0.5 kg disc 0.49 to 0.51 kg; the rulebook does not use the words fractional, change plate or micro. Checked .
- NIST Guide to the SI, Appendix B.9: Factors for units listed by kind of quantity, National Institute of Standards and Technology. Used for: Pound (avoirdupois) to kilogram factor 4.535924 E-01, used for the gram and pound conversions on the page. Checked .
- How we measure, BASALT. Used for: Plate space per side on the Signature Fitness 1 inch bars: 9 1/16 in (5 ft), 13 1/8 in (6 ft), 15 1/8 in (7 ft), our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Checked .