Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Spinlock Dumbbell Handles

A spinlock dumbbell handle is a short bar with threaded ends that takes 1 inch standard plates, held on by collars you spin along the threads. York Barbell sells them at 14, 15 and 18 inches, and its 14 inch handle set, SKU 6093, is about 4 lb per handle with collar. Body-Solid's 14 1/2 inch SDA14T weighs 3.9 lb. Titan Fitness's 19.5 inch threaded handle weighs 5 lb, has a 7 inch sleeve and is rated for 150 lb.

Updated . By the BASALT editorial team.

A spinlock dumbbell handle is a short bar with threaded ends that takes 1 inch standard plates, held on by collars you spin along the threads. York Barbell sells them at 14, 15 and 18 inches, and its 14 inch handle set, SKU 6093, is about 4 lb per handle with collar. Body-Solid's 14 1/2 inch SDA14T weighs 3.9 lb. The one 1 inch handle we found with a stated load is Titan Fitness's 19.5 inch threaded handle: 5 lb, a 7 inch sleeve and a 150 lb capacity. Every handle figure below is from the makers' own pages, read on 18 Nov 2026; conversions and sums are ours. We weighed and measured none of these handles.

How a spinlock handle works

The handle is one steel bar with a grip in the middle and a threaded sleeve on each side. You slide plates over the threads, then spin a collar along the thread until it seats against the outer plate, so the collar's thread has to match the handle's. Spring clips and clamps, which grip a smooth sleeve, are a different system; our barbell collar types guide compares them, and hex vs adjustable dumbbells compares fixed hex dumbbells with adjustable ones.

1 inch spinlock handles: what the makers state

We read the pages of seven 1 inch threaded handles from three makers: York Barbell, Body-Solid and Titan Fitness.

From York's product pages, Body-Solid's SDA14T page and BSTADBPR sheet, and Titan's 105 LB and 200 LB Adjustable Chrome Dumbbell set pages, read 18 Nov 2026. "Not stated" means no figure on the page. Shipping weights include packaging.
Maker and handleLengthWeight statedSleeve and loadCollars and how sold
York Barbell
14" Solid Steel Spinlock Dumbbell Handles w/ Collars, SKU 609314 inAbout 4 lb each, with collarNot stated. York states "a 4 7/16” collar"Four spinlock collars; set of two handles
Chrome 14" Spin-Lock Dumbbell Handle, SKU 639314 in; 24 mm handle, 4 in knurled gripNot stated (shipping weight 4 lb)Not statedTwo 4 7/16 in spinlock collars; sold individually
15" Tubular Spinlock Dumbbell Handles, SKU 6099 (chrome collars) and 6098 (red collars)15 in; 5 in textured handgripNot statedNot statedFour spinlock collars; set of two handles
18" Solid Steel Spin Lock Bar with Collars, SKU 639618 in; 25 mm handleNot stated (shipping weight 5 lb)Not statedTwo 4 7/16 in spinlock collars; sold individually
Body-Solid
1" Standard Threaded Dumbbell Handle with Collars, SDA14T14 1/2 in3.9 lb (1.8 kg) assembledNot statedCollars included per the product name; type not stated
Handles in the BSTADBPR adjustable dumbbell set14 in total handle length3.7 lb each, with collarsSet loads up to 48.7 lb per dumbbellSpin lock collars; two handles in the set
Titan Fitness
19.5" threaded handles in the 105 LB and 200 LB Adjustable Chrome Dumbbell sets19.5 in; 25 mm grip, 4.75 in long5 lb each7 in sleeve, 25 mm across; 150 lb handle capacityFour collars and 24 plates with two handles

Only Titan states a sleeve length and a load rating. The York and Body-Solid pages give neither. York's "4 7/16 in" is given as the collar's size without saying what it measures, so we do not treat it as plate space.

Spinlock dumbbell bar weight, and how to count a loaded dumbbell

The 14 to 14 1/2 inch handles that state a weight are about 4 lb: York's 14 inch SKU 6093 is about 4 lb with collar, Body-Solid's 14 1/2 inch SDA14T 3.9 lb, and the BSTADBPR set's handles 3.7 lb with collars. Titan's 19.5 inch handle is 5 lb. A loaded dumbbell is the handle, its collars and the plates.

Body-Solid's set shows the sum. The BSTADBPR comes with sixteen 5 lb plates, four 2.5 lb plates and two handles, and Body-Solid states "multiple weight configurations up to 48.7 lbs. per dumbbell". Split evenly, each dumbbell gets 45 lb of plates; add the 3.7 lb handle and you get 48.7 lb. That is the plates supplied, not a rating for the handle.

The rating and the room on the sleeve are separate limits. Titan's 10 lb plate is 22 mm thick and its 7 inch sleeve is 177.8 mm, so by our arithmetic eight plates per side would fill the sleeve with no room for the collar, and would put 160 lb of plates on it, over the 150 lb rating. Seven per side, 140 lb of plates, leaves 23.8 mm for a collar whose width Titan does not give. Titan's own set stops at 100 lb per dumbbell.

Long spinlock dumbbell handles

The longest 1 inch threaded handle we found on a maker's page is Titan's at 19.5 inches. On 18 Nov 2026 Titan's page for the handle alone sent us to a collection page, so we read its figures from the two sets it comes in, which say you change weight by "twisting the plates on and off the threaded handles". The longest York spinlock handle we found is its 18 inch bar, SKU 6396, sold one at a time, with no weight or plate space stated.

2 inch loadable dumbbell handles

Loadable Olympic handles have 2 inch sleeves for 2 inch plates. None of the three makers' pages we read mentions threads: Titan's and Strength Shop's come without collars, and York's with spring clips. York's collar list on 18 Nov 2026 had spin-lock collars only in 1 inch.

From each maker's product page, read 18 Nov 2026. Strength Shop gives metric figures; the inch and pound equivalents in brackets are our conversions.
Maker and handleLengthLoadable sleeveHandle weightStated capacityCollars
Titan Fitness Loadable 15" Olympic Dumbbell Handles, pair15 in3.5 in8 lb each400 lb eachNot included
Titan Fitness Loadable 20" Olympic Dumbbell Handles, pair20 in6.5 in12 lb each400 lb eachNot included
Strength Shop Olympic Dumbbell Handle, sold singly500 mm (about 19.7 in)18 cm sleeve length (about 7.1 in); loadable length not stated4.25 kg (about 9.4 lb)Not statedSold separately
York Barbell 20" Olympic Dumbbell Handle w/ Spring Clip Collars, SKU 2987, sold singly20 inNot statedNot stated (shipping weight 15 lb)Not statedSpring clips included

Titan's handles have 50 mm sleeves and a 28 mm shaft; Strength Shop's has 50 mm sleeves and a 25.4 mm shaft. Titan's 20 inch handle is 12 lb on its own, 7 lb more than its 19.5 inch threaded handle. What fits on any handle is set by the loadable sleeve and your plates' thickness, which our weight plate dimensions guide lists by maker.

Why 1 inch handles take the same plates as a 1 inch barbell

Plates fit by their center hole. Body-Solid states: "Standard Plates have a 1" center hole; Olympic Plates have a 2" center hole", and "You must have the matching size Barbell to use these plates". York sells its spinlock handles for "1” standard plates" and says the 15 inch handles "are made for 1″ weight plates". So a plate with a 1 inch hole that goes on a 1 inch barbell also goes on a 1 inch spinlock handle, and one set can load both; our what plates do I need guide suggests starter sets. Titan gives a 25 mm sleeve and plates with a 26 mm center; an inch is 25.4 mm. Titan does not say whether other makers' 1 inch plates fit its handles.

The bar sets the room. On the 1 inch Signature Fitness bars we sell, the plate space per side is 9 1/16 in on the 5 ft bar, 13 1/8 in on the 6 ft and 15 1/8 in on the 7 ft (our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry). The one 1 inch handle with a stated sleeve, Titan's, has 7 inches. We have not checked whether the ends of our bars are threaded, so we make no claim that spinlock collars fit them.

Collars that come with spinlock handles

Short answers

How much does a spinlock dumbbell handle weigh?

About 4 lb for a 14 inch handle: York gives about 4 lb with collar for SKU 6093, and Body-Solid 3.9 lb for its 14 1/2 inch SDA14T. Titan's 19.5 inch threaded handle is 5 lb, and its 2 inch loadable handles are 8 and 12 lb.

How long are spinlock dumbbell handles?

The 1 inch threaded handles we read run from 14 to 19.5 inches: York sells 14, 15 and 18 inch handles, Body-Solid's SDA14T is 14 1/2 inches, and Titan's is 19.5 inches with a stated sleeve length of 7 inches.

How much weight can a spinlock dumbbell handle hold?

Titan rates its 19.5 inch threaded handle at 150 lb, and that is the only 1 inch rating we found on a maker's page. York's and Body-Solid's handle pages state none. Titan rates its 2 inch loadable handles at 400 lb each.

Do barbell plates fit spinlock dumbbell handles?

Plates with a 1 inch hole do. Body-Solid states that standard plates have a 1 inch center hole, and York sells its spinlock handles for 1 inch standard plates, the same plates a 1 inch barbell takes.

Are there 2 inch spinlock dumbbell handles?

Not among the makers we read. The pages for Titan's, Strength Shop's and York's 2 inch handles mention no threads and use separate collars, and York's collar list had spin-lock collars only in 1 inch on 18 Nov 2026.

Related: barbell collar types, dumbbell sizes chart, hex vs adjustable dumbbells, weight plate dimensions, what plates do I need, dumbbells vs kettlebells, and the plate calculator.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. 14" Solid Steel Spinlock Dumbbell Handles w/ Collars (SKU 6093), York Barbell. Used for: 14 in length; about 4 lb each with collar; four spinlock collars, set of two handles; 'a 4 7/16" collar'; for 1 inch standard plates. Checked .
  2. Chrome 14" Spin-Lock Dumbbell Handle w/ Spin-Lock Collars (SKU 6393), York Barbell. Used for: 14 in; 24 mm handle; 4 in knurled grip; two 4 7/16 in spinlock collars; sold individually; shipping weight 4 lb; for 1 inch standard plates. Checked .
  3. 15" Tubular Spinlock Dumbbell Handles w/ Red Collars (SKU 6098), York Barbell. Used for: 15 in; 5 in textured handgrip; four red spinlock collars; two handles in the set. Checked .
  4. 15" Tubular Spinlock Dumbbell Handles w/ Chrome Collars (SKU 6099), York Barbell. Used for: 15 in; 5 in textured handgrip; four chrome spinlock collars; two handles in the set; 'made for 1" weight plates'. Checked .
  5. YORK 18" Solid Steel Spin Lock Bar with Collars (SKU 6396), York Barbell. Used for: 18 in; 25 mm handle; two 4 7/16 in spinlock collars; sold individually; shipping weight 5 lb; for 1 inch standard plates; York's longest spinlock handle we found. Checked .
  6. 20" Olympic Dumbbell Handle w/ Spring Clip Collars (SKU 2987), served at York's 18-inch Olympic handle URL, York Barbell. Used for: York's 20 in handle is a 2 inch Olympic handle with spring clip collars, sold individually; shipping weight 15 lb; no length breakdown, weight or capacity stated. Checked .
  7. 1" Spin-Lock Collar (SKU 6088), York Barbell. Used for: Collar 'features a rubber gasket for a secure hold on your 1" standard spin-lock barbell'; sold individually; shipping weight 0.5 lb. Checked .
  8. Barbell & Dumbbell Collars category, York Barbell. Used for: York's collar list had spin-lock collars only in 1 inch; its 2 inch collars were muscle clamp, speed and spring collars. Checked .
  9. 1" Standard Threaded Dumbbell Handle with Collars SDA14T, Body-Solid. Used for: Assembled length 14.5 in; assembled weight 3.9 lb (1.8 kg); sold with collars; no loadable length or load rating stated. Checked .
  10. BSTADBPR Adjustable Dumbbell product sheet (PDF), Body-Solid. Used for: Up to 48.7 lb per dumbbell; sixteen 5 lb plates, four 2.5 lb plates; two threaded dumbbell handles w/ spin lock collars; handles with collars 3.7 lb; total handle length 14 in; knurled handles. Checked .
  11. Cast Iron Standard Plates, Body-Solid. Used for: 'Standard Plates have a 1" center hole'; 'Olympic Plates have a 2" center hole'; 'You must have the matching size Barbell to use these plates'. Checked .
  12. 200 LB Set Adjustable Chrome Dumbbells, Titan Fitness. Used for: Two 19.5 in threaded dumbbells; grip length 4.75 in; grip diameter 25 mm; sleeve length 7 in; sleeve diameter 25 mm; plate center diameter 26 mm; 10 lb plate 22 mm thick; handle weight capacity 150 lb; handle weight 5 lb each; dumbbell total weight 100 lb each; 2 handles, 4 collars, 24 plates; 'twisting the plates on and off the threaded handles'. Checked .
  13. 105 LB Set Adjustable Chrome Dumbbells, Titan Fitness. Used for: Same 19.5 in handle figures (7 in sleeve, 25 mm, 26 mm plate center, 150 lb capacity, 5 lb each); 2 handles, 4 collars, 24 plates; twist-on collars. Checked .
  14. Adjustable Dumbbells collection, Titan Fitness. Used for: Titan's 19.5 in thread handle product URL redirected (301) to this collection on 18 Nov 2026; collection links 'Threaded handles and collars'. Checked .
  15. Loadable 15" Olympic Dumbbell Handles - Pair, Titan Fitness. Used for: 15 in; 3.5 in loadable sleeve; 50 mm sleeve; 28 mm shaft; 400 lb capacity each; 8 lb each; collars not included; sold as a pair. Checked .
  16. Loadable 20" Olympic Dumbbell Handles - Pair, Titan Fitness. Used for: 20 in; 6.5 in loadable sleeve; 50 mm sleeve; 28 mm shaft; 400 lb capacity each; 12 lb each; collars not included; sold as a pair. Checked .
  17. Olympic Dumbbell Handle - Black Zinc Coated, Strength Shop. Used for: Total length 500 mm; sleeve length 18 cm; shaft diameter 25.4 mm; weight 4.25 kg; sleeve diameter 50 mm; collars sold separately; price is for one handle. Checked .
  18. How we measure, BASALT. Used for: Plate space per side 9 1/16 in (5 ft), 13 1/8 in (6 ft), 15 1/8 in (7 ft), printed with the label 'our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry'. Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.