Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Barbell Knurling

Barbell knurling is the crosshatch pattern on the shaft that helps your hands hold the bar. Makers name patterns such as hill, volcano and mountain and grade them from passive to aggressive, and Eleiko says there is no universal standard for rating them. The smooth rings in the knurl are grip marks: the IPF rulebook spaces them 81 cm apart, and the IWF rules put a 0.5 cm strip 19.5 cm from each inner sleeve.

Updated . By the BASALT editorial team.

Barbell knurling is the crosshatch pattern on the shaft that helps your hands hold the bar. Makers name the pattern (REP Fitness uses hill, volcano and mountain; Eleiko uses pyramid and volcano) and grade it from passive to aggressive, with no shared scale. The smooth rings in the knurl are grip marks: the IWF rules put a 0.5 cm strip 19.5 cm from each inner sleeve, and the IPF rulebook spaces its markings 81 cm apart. Rule books and makers' pages read 20 Nov 2026.

What is knurling on a barbell

REP Fitness defines it as "the crosshatch pattern on the shaft that increases the grip of your hands on the bar". Eleiko calls it "the patterned texture on the shaft of a barbell" and says two things shape how a knurl feels: "the spacing between the diamond points and the depth of each cut". Both rule books ask for it: the International Weightlifting Federation (IWF) bar lists say "machined with knurling in grip section", and the International Powerlifting Federation (IPF) says the bar "shall be straight and well knurled and grooved".

Barbell knurling types and depth, as makers name them

Each maker's own words for its own bars, read 20 Nov 2026. We handled none of these bars.
MakerNames it usesWhat it says about them
REP FitnessHill, volcano, mountainHill "is the most passive". Volcano "has a good amount of grip" and is on "a lot of our weightlifting and mixed-use bars". "Mountain is the most aggressive", on "most of our powerlifting barbells". Spec lines: Colorado Bar "Volcano/Medium", Double Black Diamond Power Bar "Deep Mountain/Very Aggressive".
Eleiko1.0 Standard, 1.2 Training, 1.2 Competition, 1.5 Power1.0 Standard: "all-round volcano-shaped pattern". 1.2 Training: "moderately sharp pyramid pattern". 1.2 Competition: "sharp pyramid pattern". 1.5 Power: "pronounced volcano pattern", for powerlifting.
Texas Power BarsFine, medium, aggressive, most aggressiveTexas Cross Bar fine, Texas Multi-Purpose Bar medium, the Texas Power Bars aggressive, Texas Deadlift Bar "most aggressive". It calls the Original's cut "mountain" style.
Bells of SteelMedium, aggressivePowerlifting Bar: "Aggressive". Utility Bar: "Medium" in the spec table, "medium-light" in the description.
BullrocK Fitness1.5mm, volcanoDireWolf Deadlift Bar: "1.5mm Volcano". Sabertooth Bar: "aggressive 1.5mm knurl".

Knurl grades have no shared scale, and no page we read gives a figure it calls a depth. Eleiko writes that there is "no universal standard for rating knurling intensity". Its 1.0, 1.2 and 1.5 carry no unit on the pages we read, and the text we read on BullrocK's pages does not say whether 1.5mm is a depth or a spacing. REP's knurling article calls passive knurling shallow and aggressive knurling deeper, and gives no measurements. So a grade word compares bars inside one maker's range, not across makers.

The finish changes the feel. Eleiko says its chrome coating "fills out the smallest valleys in the pattern" and that knurling on bare steel "will always feel slightly more pronounced". REP says you feel the knurl more on a bare or stainless steel bar than on a Cerakote one. The rule books split here: the IWF lists say "manufactured from chromed steel", while the IPF says bars at its championships "shall not be chromed on the knurling". Our barbell specs and coatings guide covers each finish.

Barbell knurling marks and the distance between them

The marks, also called rings, are narrow smooth bands in the knurl that show where your hands go. The IWF's Technical and Competition Rules and Regulations 2024 lists each bar beside a drawing in millimeters. The IPF Technical Rulebook dated 1 March 2026 gives one rule and a guideline drawing.

From the bar lists and drawings in the IWF rules and section 2.3 of the IPF rulebook, read 20 Nov 2026. Inches are our conversions at 25.4 mm to the inch. "Our arithmetic" is worked from the printed figures.
Part of the layoutIWF men's barIWF women's barIPF bar
The mark, as the rule prints it"non-knurled 0.5 cm strip 19.5 cm from inner sleeve""machined diameter markings spaced 81 cm apart"
Knurl from collar to mark195 mm (7.68 in)Not captioned
Width of the mark5 mm (0.20 in)5 mm in the drawing
Knurl inside the mark245 mm (9.65 in)Not captioned
Smooth shaft150 mm (5.91 in) each side of the centre knurling420 mm (16.54 in) in one spanNot captioned
Centre knurling120 mm (4.72 in); "centre knurling = 12 cm long"None listed or drawn120 to 160 mm (4.72 to 6.30 in) in the drawing
Between the collars1310 mm (51.57 in)1320 mm in the drawing (51.97 in); the rule allows 1.31 m to 1.32 m
Distance between the two marksNot printed. Our arithmetic: 910 mm (35.83 in) between the inner edges and 920 mm (36.22 in) between the outer edges810 mm (31.89 in)

The IPF drawing also prints 240, 245 and 440 measured from one collar, without captions, so we do not assign them.

Makers quote the same distances. Eleiko writes that IPF grip marks are "set 810 mm apart" and IWF grip marks "set 910 mm apart". REP's article gives 32 in and 36 in. Those are round figures: 32 in is 812.8 mm against the IPF's 810, and 36 in is 914.4 mm, between the 910 and 920 mm edges of the IWF strips.

The IPF rulebook gives its marks a job in the bench press: the spacing of the hands "shall not exceed 81 cm measured between the forefingers", and "both forefingers must be within the 81 cm marks". The IWF rules mention their strip only in the two bar lists. Our Olympic barbell dimensions guide has the rest of each bar.

One set of marks or both, and the center knurl

REP's article says a bar with two knurl marks on each side follows both the IWF and the IPF standard. Five makers, 13 bars:

As each maker states on its product or comparison page, read 20 Nov 2026. "IPF-5" and "IPF-4" are BullrocK's own labels, printed as given.
Maker and barKnurl marks, as statedCenter knurl, as stated
REP Fitness
Colorado Bar, 20 kgDual (IPF & IWF)No
Double Black Diamond Power BarIPFYes
Texas Power Bars
Texas Power Bar OriginalSingle Powerlifting Knurl Mark4 in
Texas Power Bar PROSingle Knurl Marks5 in
Texas Power Bar Elite 20KGSingle Knurl Marks6 in
Texas Deadlift BarSingle Knurl MarksNo Center Knurl
Texas Multi-Purpose BarDual Knurl Marks4 in
Texas Cross BarDual Knurl MarksNo Center Knurl
Bells of Steel
Powerlifting BarPowerliftingYes
Utility Bar (Multi-Purpose Olympic Barbell)Weightlifting & PowerliftingYes, 120 mm / 4.7 in
Titan Fitness
TITAN Series Women's Olympic BarbellDual knurl marks (IWF and IPF)No Center Knurl
BullrocK Fitness
Sabertooth BarIPF-5Yes
DireWolf Deadlift BarIPF-4No

Three of the 13 name both sets: REP and Titan say IWF and IPF, and Bells of Steel says weightlifting and powerlifting. Texas Power Bars' comparison page says "Dual Knurl Marks" for two more bars and does not say which marks. The other eight state a single mark or one standard. Of those eight, six state a center knurl and the two deadlift bars state none. Of the other five, the Texas Multi-Purpose Bar and the Bells of Steel Utility Bar have a center knurl, and three do not. REP says its power bar's center knurling is there "to keep the barbell in place during back squats". Eleiko says that in high-rep sessions a center knurl can lead to scraping across the chest or collarbone. Our deadlift bar vs power bar guide compares those two bar types.

If the barbell knurling is too aggressive

The makers' own answer is a different grade or finish:

On care, Eleiko's bar pages say: "Brush off chalk after sessions to keep your knurling feeling sharp." Texas Power Bars recommends a nylon or brass brush and a light coat of 3-in-1 oil for bare steel. Bells of Steel says to use only nylon brushes or microfiber towels on Cerakote. The steps by finish are in how to clean a barbell.

The knurl on our 1 inch bars

BASALT sells Signature Fitness 1 inch standard barbells in 5 ft, 6 ft and 7 ft lengths. We have not measured or graded their knurl, so each bar page lists Knurl as "Pending" and this page prints no knurl figure for them. The IWF and IPF layouts above are rules for those federations' competition bars, with 5 cm sleeves in the IWF lists and 50 mm to 52 mm in the IPF rule. Neither is a rule for a 1 inch standard bar.

Short answers

What is knurling on a barbell?

It is the crosshatch pattern on the shaft that helps your hands hold the bar. Eleiko says spacing and depth of cut shape how it feels.

What are the barbell knurling types?

REP Fitness names three: hill, the most passive, volcano, and mountain, the most aggressive. Eleiko names pyramid and volcano patterns in four profiles, 1.0 Standard to 1.5 Power, and says there is no universal standard for rating them.

What is the distance between barbell knurl marks?

81 cm, which is 31.89 in, on an IPF powerlifting bar. On an IWF bar the strips sit 19.5 cm from each inner sleeve, so by our arithmetic their inner edges are 910 mm apart, 35.83 in. REP Fitness calls these 32 in and 36 in.

What is the barbell knurling ring for?

It shows where to put your hands so your grip is even. In the IPF bench press both forefingers must be within the 81 cm marks.

Do all barbells have a center knurl?

No. The IWF men's bar has 12 cm of centre knurling and the women's bar has none. Of the 13 bars in our table, from five makers, eight state a center knurl and five state none.

Related: barbell specs and coatings, Olympic barbell dimensions, how to clean a barbell, deadlift bar vs power bar, and the plate calculator.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. IWF Technical and Competition Rules and Regulations 2024, International Weightlifting Federation (IWF), copy hosted by the Polish Weightlifting Federation. Used for: Men's and women's bar lists and drawings: 'machined with knurling in grip section', 'manufactured from chromed steel', 'non-knurled 0.5 cm strip 19.5 cm from inner sleeve', 'centre knurling = 12 cm long' on the men's bar and none on the women's bar, 5 cm sleeves, and the drawing figures 195, 5, 245, 150, 120, 420 and 1310 mm. Our arithmetic of 910 mm and 920 mm between the strips is worked from these. The strip is mentioned only in the two bar lists.. Checked .
  2. IPF Technical Rulebook, effective 1 March 2026, section 2.3 Bars and Discs and the bench press rules, International Powerlifting Federation. Used for: 'shall be straight and well knurled and grooved', 'shall not be chromed on the knurling', 'machined diameter markings spaced 81 cm apart', collar faces 1.31 m to 1.32 m, sleeve 50 mm to 52 mm, the guideline drawing figures 5, 120 to 160, 240, 245, 440, 810 and 1320 mm, and the bench press rule that hand spacing 'shall not exceed 81 cm measured between the forefingers' with 'both forefingers must be within the 81 cm marks'.. Checked .
  3. SI Units: Length, National Institute of Standards and Technology. Used for: The inch is exactly 25.4 mm, used for every inch conversion on the page.. Checked .
  4. More Than You Ever Wanted to Know About Barbell Knurling, REP Fitness. Used for: That knurl marks, also called knurl rings or grip markings, help you gauge the distance of your hands on the bar so they are even; REP's ring figures of 36 in (IWF) and 32 in (IPF), that a bar with two knurl marks on each side follows both standards, passive knurling as shallow and aggressive as deeper with no measurements given, and that the knurl is felt more on a bare or stainless steel bar than on a Cerakote one.. Checked .
  5. Colorado Bar, 20kg, REP Fitness. Used for: REP's definition of knurling as 'the crosshatch pattern on the shaft that increases the grip of your hands on the bar', its three knurl styles hill, volcano and mountain with their descriptions, and the Colorado Bar spec lines: Knurl Style 'Volcano/Medium', Center Knurl 'No', Knurl Markings 'Dual (IPF & IWF)'; the knurl markings 'provide a visual for even hand placement on the barbell'.. Checked .
  6. Double Black Diamond Power Bar, REP Fitness. Used for: Spec lines: Knurl Style 'Deep Mountain/Very Aggressive', Center Knurl 'Yes', Knurl Markings 'IPF', and 'center knurling to keep the barbell in place during back squats'.. Checked .
  7. How bar knurling differs, Eleiko. Used for: Eleiko's definition of knurling, grip markings as smooth, knurl-free bands on the shaft, also called knurl rings, that guide hand placement, the two things that shape how a knurl feels, the four profiles 1.0 Standard, 1.2 Training, 1.2 Competition and 1.5 Power with their pattern names, 'no universal standard for rating knurling intensity', the chrome coating and bare steel statements, IPF grip marks 'set 810 mm apart' and IWF grip marks 'set 910 mm apart', and the center knurl scraping statement for high-rep sessions.. Checked .
  8. IPF Powerlifting Competition Bar, 20 kg, Eleiko. Used for: '1.5 Knurling' printed with no unit, and 'Brush off chalk after sessions to keep your knurling feeling sharp.'. Checked .
  9. IWF Weightlifting Competition Bar, 20 kg, men, Eleiko. Used for: '1.2 Knurling' printed with no unit, and the same care line about brushing off chalk.. Checked .
  10. Texas Power Bar Original product page, Texas Power Bars. Used for: Original: Knurling 'Aggressive', Center Knurl 4 in, 'Single Powerlifting Knurl Mark', 'mountain' style knurling, 'It is not recommended for lifters who prefer soft or passive knurling', Knurl Type 'Aggressive Only' for the Original against 'Aggressive or Medium' for the PRO and Elite, and a nylon or brass brush with a light coat of 3-in-1 oil for bare steel.. Checked .
  11. Compare All Bars, Texas Power Bars. Used for: Knurling grade, center knurl and knurl marks for the Texas Power Bar Elite 20KG (aggressive, 6 in, single), PRO (aggressive, 5 in, single), Original (aggressive, 4 in, single), Texas Deadlift Bar (most aggressive, none, single), Texas Multi-Purpose Bar (medium, 4 in, 'Dual Knurl Marks') and Texas Cross Bar (fine, none, 'Dual Knurl Marks'). The page does not say which marks 'Dual' means and names no federation for them.. Checked .
  12. Powerlifting Bar, Bells of Steel. Used for: Spec lines Knurl 'Aggressive', Knurling Marks 'Powerlifting', Center Knurl 'Yes'; black Cerakote for lifters who 'prefer a little less bite'; nylon brushes or microfiber towels only on Cerakote.. Checked .
  13. Multi-Purpose Olympic Barbell, The Utility Bar, Bells of Steel. Used for: Spec lines Knurl 'Medium', Knurling Marks 'Weightlifting & Powerlifting', Center Knurl 'Yes'; '120 mm / 4.7 in Center Knurl'; 'medium-light knurl' in the description.. Checked .
  14. TITAN Series Women's Olympic Barbell, Titan Fitness. Used for: 'Dual knurl marks (IWF and IPF)' and 'No Center Knurl'.. Checked .
  15. The Sabertooth Bar (20kg, 29mm) Black Hard Chrome, Remastered, BullrocK Fitness. Used for: 'aggressive 1.5mm knurl', Knurl Type 'IPF-5', Center Knurl 'Yes'; the text does not say whether 1.5mm is a depth or a spacing.. Checked .
  16. The DireWolf Deadlift Bar (20kg, 27mm, 2330mm) Black, Remastered, BullrocK Fitness. Used for: Knurl '1.5mm Volcano', Knurl Type 'IPF-4', Center Knurl 'No'.. Checked .
  17. 5 ft Standard Barbell, 1 Inch, Signature Fitness, BASALT. Used for: Spec row Knurl 'Pending'; maker Signature Fitness.. Checked .
  18. 6 ft Standard Barbell, 1 Inch, Signature Fitness, BASALT. Used for: Spec row Knurl 'Pending'; maker Signature Fitness; a 1 inch bar for 1 inch plates.. Checked .
  19. 7 ft Standard Barbell, 1 Inch, Signature Fitness, BASALT. Used for: Spec row Knurl 'Pending'; maker Signature Fitness.. Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.