Signature Fitness 1 inch standard bars, 5, 6 and 7 ft, are available now on eBay. Checkout on this site opens later.

Swiss Bar Weight

There is no standard Swiss bar weight. The 14 Swiss, multi-grip and football bars from 10 makers whose own pages we read on 20 Nov 2026 state from 20.70 lb, about 9.4 kg, in Bells of Steel's spec table (its page text says 24 lbs / 10 kg) to 30 kg, about 66.1 lb. Nine state under 45 lb, three state 45 lb and two state more. Titan states 38 lb and 41 lb for its two bars.

Updated . By the BASALT editorial team.

There is no standard Swiss bar weight. The 14 Swiss, multi-grip and football bars from 10 makers whose own pages we read on 20 Nov 2026 state from 20.70 lb, about 9.4 kg, in Bells of Steel's spec table (its page text says 24 lbs / 10 kg) to 30 kg, about 66.1 lb. Nine state under 45 lb, three state 45 lb and two state more. The middle of the list is 40 lb. Every figure below is the maker's own; the conversions are ours. We weighed none of these bars.

Swiss and multi-grip bar weight by model, in lb and kg

A Swiss bar is a frame of handles between two sleeves. Body-Solid says its multi-grip bar is "also called a Swiss Bar or the Football Bar", and REP separates a flat Swiss, with straight handles, from a football bar, with angled ones. Where a maker gives one unit, the other is our conversion at 0.4535924 kg to the pound.

Each maker's own product page, read 20 Nov 2026. Figures after "about" are our conversions. Vulcan says all its measurements are approximations.
Maker and modelStated weightOther unit
Under 45 lb
Bells of Steel Arch Nemesis Swiss Bar20.70 lb in the spec table; "24 lbs / 10 kg" in the page textabout 9.4 kg, from the spec table
Strength Shop Olympic Football Bar10 kgabout 22.0 lb
Strength Shop Olympic Swiss Bar15.5 kgabout 34.2 lb
EliteFTS Multi-Grip Log Bar35 poundsabout 15.9 kg
Titan Fitness Angled Multi-Grip Barbell38 lbabout 17.2 kg
EliteFTS American Press Bar38 poundsabout 17.2 kg
EliteFTS American Gridiron Bar40 lbsabout 18.1 kg
Fringe Sport Multi-Grip Swiss Barbell40 poundsabout 18.1 kg
Titan Fitness Multi-Grip Barbell41 lbabout 18.6 kg
45 lb
REP Fitness Cambered Swiss Bar45 lbsabout 20.4 kg
Vulcan Strength Pro Swiss-Football Bar45 lbs approximatelyabout 20.4 kg
Body-Solid OMG86 Olympic Multi-Grip Bar45 lbsabout 20.4 kg
Over 45 lb
Sorinex Multi-Grip Bar50 lbsabout 22.7 kg
Watson Swiss Bar25 kg with Olympic ends, 30 kg with revolving endsabout 55.1 lb and 66.1 lb

Bells of Steel's spec table says 20.70 lb while its text says 24 lbs / 10 kg, a pair that does not agree with itself, since 10 kg is about 22.0 lb. Body-Solid's 45 lbs is its product weight; the 48.5 lb on the same page is the gross weight listed with the package dimensions, and the 48.50 LBS near the top of the page matches it.

Length, grips, sleeves and rack fit

As each maker states them, read 20 Nov 2026. "Not stated" means not in the text of the page we opened; we did not read product pictures, manuals or spec sheets.
ModelOverall lengthGripsSleevesRack fit, as stated
Bells of Steel Arch Nemesis80 in / 2032 mm3 neutral grips at 15 degrees49.7 mm; 13.93 in / 354 mm loadableNo width given
Strength Shop Football Bar2100 mmAngled handles; count not stated50 mm; sleeves 400 mm longNot stated
Strength Shop Swiss Bar210 cmFour neutral grip positions50 mm; sleeve length 40 cmNot stated
EliteFTS Multi-Grip Log BarNot statedHandles 6, 14 and 22.5 in apartNot stated52 in between collars; "Fits most power racks"
Titan Angled Multi-Grip Barbell82.25 inFour sets of grips angled 30 degrees, roughly 2.5 in apart48 mm; 14 1/2 in loadable53 in sleeve to sleeve; "Rackable on standard power racks"
EliteFTS American Press Bar83.5 inThree neutral grips 17, 24 and 30 in apart; inside angled handles 8 in apartSleeve length 15.5 inRackable space between 39.5 and 50.5 in
EliteFTS American Gridiron Bar82.5 in in the spec list, 81.5 in in the features4 grip options; handle spacing 7, 14, 21 and 28 inSleeve length 14 in per side or 15 3/4 inRackable space between 39.5 and 50.5 in
Fringe Sport Multi-Grip Swiss Barbell85.375 in as total bar dimensions; 83.375 in as length3 angled handle positions, 26, 18 and 10.5 in wide2 in; 17.5 in loadable40 in between the sleeves; a rack "width between 40 and 43 inches"
Titan Multi-Grip Barbell82 in30 degree angled grips 10 in apart, neutral grips 20 and 29 in apart48 mm; 14 1/2 in loadable53 in sleeve to sleeve; "Rackable on standard power racks"
REP Cambered Swiss Bar80.7 inThree grips; spacing not stated50 mm; 14.03 in loadable"rackable on most setups"; no width given
Vulcan Pro Swiss-Football Bar80 inHandle spacing 10, 20 and 28.5 in14 in loadable; diameter not stated51 in between sleeves; "Rackable"
Body-Solid OMG8686.2 inThree separate neutral grips2 in; 16.5 in loadable52.5 in between collars; "Compatible with most power racks"
Sorinex Multi-Grip Bar85.5 in8 grip locations, vertical and angled handles1.9 in; sleeve length 16 inNot stated
Watson Swiss BarNot statedHandles spaced at 150, 350 and 550 mmNot stated"fits in a Power Rack"

Stated lengths run from 80 in to 86.2 in, and stated loadable sleeve lengths from 13.93 in to 17.5 in. Every page that gives a sleeve diameter gives 48 to 50 mm, 1.9 in or 2 in, so a plate with a 1 inch hole will not fit.

Will a Swiss bar fit your rack?

The part that rests on the J-hooks is the short length between the handle frame and each sleeve. EliteFTS calls it rackable space and states 5 in of it between the bar collar and the grip rectangle on its American Press Bar.

The four racks in the width table of our power rack dimensions guide are 42 or 44 inches between the uprights and about 46 to 48 inches across their outside faces. Those figures sit inside EliteFTS's 39.5 to 50.5 in range, between Titan's 39.5 in grip frame width and its 53 in sleeve to sleeve figure, and under the 51 to 52.5 in that Vulcan, EliteFTS's log bar and Body-Solid state between sleeves or collars. Fringe Sport's page does not say whether its 40 to 43 inch rack width is inside or outside the uprights. Six of the 14 pages state no width figure. Measure your own rack both ways before you buy.

What differs between Swiss bars of different weights

Why your logged total differs from a 45 lb bar

The bar counts toward what you lift. REP calls its 45lbs "standard", but nine of these 14 bars state less. A 41 lb Titan Multi-Grip Barbell with a 45 lb plate on each side is 131 lb; counted as a 45 lb bar you would write 135 lb, 4 lb too many. With EliteFTS's 35 pound log bar the same plates make 125 lb. A 30 kg Watson bar with a 20 kg plate on each side is 70 kg.

Collars differ too: Titan says spring collars do not fit its 48 mm sleeves, while REP says its bar fits standard collars.

The plate calculator has an "Another Olympic bar: enter its weight" choice in its Bar menu and an "Other collars: enter the weight of one" choice in its Collars menu. Pick them and type your own figures, in your plates' unit. Our how much does a barbell weigh guide covers straight bars and the other bar types.

Rogue and the pages we could not read

Rogue's site refused both multi-grip bar pages we requested on 20 Nov 2026, so this page prints no Rogue figure rather than one copied from a retailer. Mirafit's Swiss bar page refused as well. If your bar is not in the table, read its maker's page or weigh it.

How to weigh a Swiss bar

  1. Weigh yourself on a bathroom scale.
  2. Weigh yourself again holding the bar, without plates or collars.
  3. Subtract. Our how to weigh your weights guide covers the method and its limits.

The Signature Fitness 1 inch bars we sell are straight bars and take 1 inch plates.

Short answers

How much does a Swiss bar weigh?

It depends on the model: the 14 we read state from 20.70 lb, about 9.4 kg, in Bells of Steel's spec table (24 lbs / 10 kg in its page text) to 30 kg, about 66.1 lb. Nine state under 45 lb, three state 45 lb and two state more.

What is a Swiss bar's weight in kg?

From 10 kg to 30 kg in the kilogram figures we read. Strength Shop states 10 kg for its Olympic Football Bar and 15.5 kg for its Olympic Swiss Bar, and Watson states 25 kg or 30 kg, by the ends fitted.

How much does the Titan Swiss bar weigh?

38 lb or 41 lb, depending on the bar. Titan's Angled Multi-Grip Barbell page, which calls that bar a Swiss bar, states 38 lb and its Multi-Grip Barbell page states 41 lb.

How much does the EliteFTS Swiss bar weigh?

35 pounds, about 15.9 kg, for the Multi-Grip Log Bar, which EliteFTS's page also calls the Multi-Grip Swiss Log Bar. Its American Press Bar states 38 pounds and its American Gridiron Bar 40 lbs.

Is a multi-grip bar 45 lb?

Three of the 14 we read state 45 lb: REP's Cambered Swiss Bar, Body-Solid's OMG86 and Vulcan's Pro Swiss-Football Bar, which says approximately. Nine state less and two state more, so count your own bar's figure.

Related: safety squat bar weight, trap bar weight, EZ curl bar weight, how much does a barbell weigh, power rack dimensions, how to weigh your weights, and the plate calculator.

Sources

We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.

  1. Arch Nemesis Swiss Bar, Bells of Steel. Used for: Spec table: Weight (lb) 20.70, Length 80 in / 2032 mm, Loadable Sleeve Length 13.93 in / 354 mm; page text: "24 lbs / 10 kg", 3 neutral grip positions at 15 degrees, 49.7 mm sleeves; no rack width given. Checked .
  2. Olympic Football Bar, Strength Shop. Used for: Weight 10 kg; length 2100 mm; length of sleeves 400 mm; diameter loading pin 50 mm; angled handles; SKU BAR-FOOT-HOLLOW; the word hollow is not in the description text. Checked .
  3. Olympic Swiss Bar, Strength Shop. Used for: Weight 15.5 kg; total length 210 cm; sleeve length 40 cm; sleeve diameter 50 mm; four neutral grip positions; SKU BAR-SWISS-HOLLOW; the word hollow is not in the description text. Checked .
  4. EliteFTS Multi-Grip Log Bar, EliteFTS. Used for: Bar weighs 35 pounds; handles 6, 14 and 22.5 in apart; 52 in between collars; "Fits most power racks"; the page also calls it the Multi-Grip Swiss Log Bar; no overall length or sleeve size in the page text. Checked .
  5. Angled Multi-Grip Barbell, Titan Fitness. Used for: Product weight 38 lb; overall length 82.25 in; four grip sets angled 30 degrees and spaced roughly 2.5 in apart; sleeve diameter 48 mm; loadable sleeve length 14 1/2 in (printed as a decimal); grip frame width 39.5 in; sleeve to sleeve length 53 in; "Rackable on standard power racks"; the overview calls it a Swiss bar; spring collars do not fit the 48 mm sleeves. Checked .
  6. American Press Bar, EliteFTS. Used for: Bar weight 38 pounds; overall bar length 83.5 in; sleeve length 15.5 in; three neutral grip handles 17, 24 and 30 in apart; inside angled handles 8 in apart; 5 in of rackable space between bar collar and grip rectangle; rackable space between 39.5 and 50.5 in. Checked .
  7. American Gridiron Bar, EliteFTS. Used for: Weight 40 lbs; length 82.5 in in the specifications and overall length 81.5 in in the feature list; sleeve length 14 in per side in the specifications and 15 3/4 in in the feature list; 4 grip options; handle spacing 7, 14, 21 and 28 in; rackable space between 39.5 and 50.5 in. Checked .
  8. Multi-Grip Swiss Barbell, Fringe Sport. Used for: Weight 40 pounds; total bar dimensions 85.375 in long; Length 83.375 in; 3 angled handle positions 26, 18 and 10.5 in wide; sleeves 2 inch diameter; loadable length 17.5 in; 40 inches between the sleeves; "a width between 40 and 43 inches" for the rack, with no word on inside or outside width. Checked .
  9. Multi-Grip Barbell, Titan Fitness. Used for: Product weight 41 lb; overall length 82 in; three grip positions: 30 degree angled grips 10 in apart and neutral grips 20 and 29 in apart; loadable sleeve 14 1/2 in (printed as a decimal) by 48 mm; grip frame width 39.5 in; sleeve to sleeve length 53 in; "Rackable on standard power racks"; spring collars do not fit the 48 mm sleeves. Checked .
  10. Cambered Swiss Bar, REP Fitness. Used for: Weight 45lbs, which REP calls standard; length 80.7 in; loadable sleeve length 14.03 in; sleeve diameter 50 mm; three grips; "rackable on most setups"; fits standard collars; a flat Swiss has straight handles and a football bar angled handles. Checked .
  11. Vulcan Pro Swiss-Football Bar, Vulcan Strength. Used for: Net weight 45 lbs approximately; length 80 in; loadable sleeve length 14 in; distance between sleeves 51 in; handle spacing 10, 20 and 28.5 in; "Rackable"; all measurements are approximations. Checked .
  12. OMG86 2 inch Olympic 7 ft Multi-Grip Bar, Body-Solid. Used for: Product weight 45 lbs; gross weight 48.5 lb under package dimensions; 48.50 LBS in the Product Dimensions line near the top of the page; dimensions 86.2 in long; three separate neutral grips; 2 in sleeve diameter; 16.5 in loadable sleeve length; 52.5 in between collars; "Compatible with most power racks"; "also called a Swiss Bar or the Football Bar". Checked .
  13. Multi-Grip Bar, Sorinex. Used for: Weight 50 lbs; length 85.5 in; sleeve diameter 1.9 in; sleeve length 16 in; 8 different grip locations; vertical and angled handles. Checked .
  14. Swiss Bar, Watson Gym Equipment. Used for: 25 kg bar with Olympic ends, 30 kg bar with revolving ends; handles spaced at 150 mm, 350 mm and 550 mm; "fits in a Power Rack"; no overall length or sleeve size in the page text. Checked .
  15. NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically, National Institute of Standards and Technology. Used for: Pound (avoirdupois) to kilogram factor 0.4535924, behind every figure after "about" (about 9.4 kg, 15.9 kg, 17.2 kg, 18.1 kg, 18.6 kg, 20.4 kg, 22.7 kg, 22.0 lb, 34.2 lb, 55.1 lb, 66.1 lb). Checked .
  16. Power Rack Dimensions, BASALT. Used for: The four racks in its width table are 42 or 44 inches between the uprights and about 46 to 48 inches across the outside of the uprights. Checked .
  17. Barbell Plate Calculator, BASALT. Used for: Its Bar menu has an "Another Olympic bar: enter its weight" choice and its Collars menu an "Other collars: enter the weight of one" choice, each taking a figure in the plates' unit (confirmed in the tool's part file, 20 Nov 2026). Checked .
Copyright 2026 Basalt Fitness LLC. Every figure we measured carries its date and method, and preliminary ones say so.