Axle Bar Weight
There is no standard axle bar weight. The 15 axle and fat bars from 10 makers whose own pages we read on 20 Nov 2026 state from 17 lb, about 7.7 kg, to 36 kg, about 79.4 lb. Of the eleven that are about 7 ft long, five state 22 to 32 lbs, two state 44 lbs and four state 25 kg or more. None states 45 lb, so count your own bar's figure.
There is no standard axle bar weight. The 15 axle and fat bars from 10 makers whose own pages we read on 20 Nov 2026 state from 17 lb, about 7.7 kg, to 36 kg, about 79.4 lb. Of the eleven that are about 7 ft long, five state 22 to 32 lbs, two state 44 lbs and four state 25 kg or more. None states 45 lb. Every figure below is the maker's own. We weighed none of these bars.
Axle bar weight by model, in lb and kg
An axle, also sold as a fat bar or thick bar, is a straight bar about 2 inches thick from end to end; Fringe Sport says of its own that the 2 inch diameter includes the shaft and the collars do not rotate. Where a maker gives one unit, the other is our conversion at 0.4535924 kg to the pound.
| Maker and model | Stated weight | Other unit | Stated length |
|---|---|---|---|
| About 7 ft long | |||
| REP Fitness Axle Bar, 7' | 22lbs | about 10.0 kg | 7' |
| Titan Fitness 84" Axle Barbell | 24 lb. | about 10.9 kg | 84-in. |
| Valor Fitness Axle Bar (OB-AXL) | 25 lb | about 11.3 kg | 84" |
| Body-Solid OB86FG Fat Grip 2" Olympic Bar | 29 lbs. | 13.15kg, also stated | 86" |
| Sorinex Fat Bar | 32 lbs | about 14 1/2 kg | 84" |
| Vulcan Strength Axle Bar, Long | 44 lbs | about 20.0 kg | 84" |
| Fringe Sport 20kg Axle "Fat" Bar | 44lbs | about 20.0 kg | 84" |
| Cerberus Strongman Axle Bar | 25kg | about 55.1 lb | 2200mm |
| Texas Power Bars 2" Fat Axle Power Bar | 55LBS / 25KG | both stated | 86" |
| Strength Shop 60mm Thick Bar/Axle | approx. 25kg | about 55.1 lb | approx. 2.1m |
| Strength Shop Solid Steel Competition Axle | 36kg | about 79.4 lb | 2.2m |
| Shorter bars | |||
| REP Fitness Axle Bar, 5' | 17lbs | about 7.7 kg | 5' |
| Titan Fitness 60" Axle Barbell | 17 lb. | about 7.7 kg | 60-in. |
| Fringe Sport Stubby Axle Barbell | 22 pounds | about 10.0 kg | 70 3/4" |
| Vulcan Strength Axle Bar, Shorty | 24 lbs | about 10.9 kg | 60" |
Bells of Steel sells axle bars in two lengths, 61.8" and 85.8", but we did not find a bar weight in the text of its page.
Diameter, sleeves, plates and capacity
| Model | Shaft diameter | Loadable sleeve | Do the sleeves rotate? | Plates and collars, as stated | Stated capacity |
|---|---|---|---|---|---|
| REP Axle Bar, 5' and 7' | 2" | 13.75" (5'), 15.75" (7') | Not stated | 2 inch Olympic iron and bumper plates; own collars included, standard collars fit | 700lb |
| Titan Axle Barbell, 60" and 84" | 49mm | 8-in. (60"), 15.5-in. (84") | Not stated | "Fits Olympic weight plates" | 880 lb. (60"), 660 lb. (84") |
| Valor OB-AXL | 2" | 16" | No | Only plates with a 2 inch center hole | 500 lbs |
| Body-Solid OB86FG | 2" | 15-3/4" | Not stated | Olympic weights | 600 lbs. |
| Sorinex Fat Bar | 2" | 15.75" | No | "Spring collars will not work with non-machined bars" | Not stated |
| Vulcan Axle Bar, Long and Shorty | 50 mm (2 inches) | 11" (Long), 8" (Shorty) | Not stated | Long: "Spring collars or any barbell collars will work" | Not stated |
| Fringe Sport 20kg | 50mm | 15.5" | No | "Standard collars fit on this fatbar" | 1,000lbs |
| Fringe Sport Stubby | 2 inch | 9 inches | No | "Use your standard collars" | 1,000 pounds |
| Cerberus Strongman Axle Bar | 50mm | 440mm | No | "fits standard Olympic plates" | 680.38kg / 1500lb |
| Texas Power Bars 2" Fat Axle | 50MM (2") | 15" | Yes | Not stated | Not stated |
| Strength Shop 60mm | 60mm | Not stated | No | Not stated | Rated to 450kg |
| Strength Shop Solid Steel | 50mm | 415 mm | No | Not stated | Rated up to 450 kg |
| Bells of Steel Axle Bars | 1.96" / 50mm | 8" (short), 15.5" (standard) | No | Olympic bar collars fit; axle collars not required | 600lbs / 272.2kg |
Every diameter in the table is 2 inches or 49 to 60 mm, and every page that says what the bar takes names Olympic plates or weights, or a 2 inch hole, so a 1 inch plate will not fit. Texas Power Bars is the one maker in the table that states rotating sleeves. Our Olympic barbell dimensions guide covers the standard bar. Loadable sleeves on the 7 ft bars run from Vulcan's 11" to Cerberus's 440mm, about 17.3 in.
For rack fit, Titan states 52-in. sleeve to sleeve on its 84" bar, REP 52" between the collars at 7', and Cerberus 1310mm, about 51.6 in. Bells of Steel says only its long bar fits a power rack correctly.
On collars the makers differ: Sorinex says spring collars will not work with non-machined bars, while Vulcan says spring collars or any barbell collars will work on its long bar. Our barbell collar types guide explains each kind.
Why axle bar weights differ
- Solid bar or pipe. The United States All-Round Weightlifting Association (USAWA) rulebook says its 2 inch bar "may be a pipe or a solid steel shaft". Strength Shop names its 36kg bar the Solid Steel Competition Axle. Bells of Steel calls its bars Hollow Axle Bars. Cerberus's bar has the same 50mm diameter and 2200mm length as Strength Shop's 2.2m Solid Steel bar and states 25kg, 11 kg less.
- Steel gauge. Vulcan says its long bar is made of heavier gauge steel than similar bars and that its weight is higher. It states 44 lbs at 84"; Titan's bar of the same length states 24 lb.
- Not diameter alone. Strength Shop's 60mm bar states approx. 25kg, less than its 50mm Solid Steel bar at 36kg.
What the rule books say about the axle
None of the three rule documents we opened sets an axle weight.
- Strongman Corporation. Its national records document, a November 2023 file, says axle diameters from 1.9 to 2.5 inches may be used for the clean once, press for reps record and for the max axle deadlift listed under retired records. For the 2 inch max axle clean and press and the clean and press each rep record, the axle must be from IronMind. It states no bar weight.
- IronMind. Its rules for the double overhand axle deadlift require a genuine IronMind axle and full-sized plates of the 450 mm IWF and IPF diameter. Plates must be calibrated or weighed on a proven scale, and no grip aid other than chalk is allowed.
- USAWA. The 13th edition rulebook, dated August 29, 2024, has a specification for a 2 inch bar. It must be at least 1.9 inches in diameter and at least 7 feet long, with 51 to 58 inches between the inside collars, no rotating sleeves and no knurling. "The weight of the bar must be clearly marked."
So these rules limit the bar's thickness or its maker, not its weight.
What it does to the total you log
The bar counts toward what you lift. A 24 lb Titan axle with a 45 lb plate on each side is 114 lb; counted as a 45 lb bar you would write 135 lb, 21 lb too much. A 36 kg Strength Shop axle with a 20 kg plate on each side is 76 kg; counted as a 20 kg bar you would write 60 kg, 16 kg short. The USAWA rulebook also counts the collars in the total weight.
The grip changes the lift too. Fringe Sport says most people cannot close their hand fully around an axle, and that because the collars do not rotate, taking the bar from the ground to the shoulder is much harder than with an Olympic barbell. The rules differ on aids too: Strongman Corporation's retired axle deadlift record rules allow lifting straps, and IronMind's deadlift allows no grip aid other than chalk.
The plate calculator has an "Another Olympic bar: enter its weight" choice in its Bar menu. Type your axle's figure there. For other bar types, see how much does a barbell weigh.
Rogue and the pages we could not read
Rogue's product page for its axle and its support page both refused our requests on 20 Nov 2026, so this page prints no Rogue figure. IronMind's store page for its axle and Mirafit's axle page did not open either. If your bar is not in the tables, read the maker's own product page, or weigh it.
How to weigh an axle bar
- Weigh yourself on a bathroom scale.
- Weigh yourself again holding the bar, without collars.
- Subtract. Our how to weigh your weights guide covers the method and its limits.
For comparison, the Signature Fitness 1 inch bars we sell weighed about 12.4 lb (5 ft), 14.5 lb (6 ft) and 17.9 lb (7 ft) on our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. They are 1 inch standard bars that take 1 inch plates, not axles.
Short answers
How much does an axle bar weigh?
It depends on the model: the 15 we read state from 17 lb, about 7.7 kg, to 36 kg, about 79.4 lb. Among the eleven about 7 ft long, five state 22 to 32 lbs.
What is an axle bar's weight in kg?
From about 7.7 kg to 36 kg in the makers' figures we read. Cerberus states 25kg, Texas Power Bars 55LBS / 25KG, Strength Shop approx. 25kg or 36kg by model, and Fringe Sport sells a 44lbs bar as its 20kg axle.
How much does the Titan axle bar weigh?
24 lb for the 84 inch bar and 17 lb for the 60 inch bar, about 10.9 kg and 7.7 kg. Titan lists a weight tolerance of +/- 2 LB and a 49mm shaft.
How much does a strongman axle bar weigh?
The rules we read set no weight. Cerberus states 25kg for its Strongman Axle Bar and Strength Shop 36kg for its Solid Steel Competition Axle. Strongman Corporation requires an IronMind axle for two of its 2 inch clean and press records.
Is an axle bar 45 lb?
None of the 15 we read states 45 lb. The closest are the Vulcan long bar and the Fringe Sport 20kg bar at 44 lbs, so count your own bar's figure.
Related: how much does a barbell weigh, safety squat bar weight, trap bar weight, Olympic barbell dimensions, barbell collar types, how to weigh your weights, and the plate calculator.
Sources
We opened each of these on the date shown and checked the figures on this page against them. Prices and listings change, so follow the links for the current figure. How we write and check guides is in our editorial policy.
- Axle Bar, REP Fitness. Used for: Weight 5' (17lbs), 7' (22lbs); length 5' or 7'; length between the collars 5' (32.5"), 7' (52"); loadable sleeve length 5' (13.75"), 7' (15.75"); diameter 2"; works with 2 inch Olympic iron plates and bumper plates; comes with specialty collars, standard collars compatible; can handle a 700lb load. Checked .
- Axle Barbells, 60 in and 84 in, Titan Fitness. Used for: 84 in variant: product weight 24 lb., overall length 84-in., loadable sleeve length 15.5-in., sleeve to sleeve length 52-in., weight capacity 660 lb. 60 in variant: product weight 17 lb., overall length 60-in., loadable sleeve length 8-in., sleeve to sleeve length 43-in, weight capacity 880 lb. Both: shaft diameter 49mm, sleeve diameter 49mm, weight tolerance +/- 2 LB, fits Olympic weight plates. Checked .
- Strongman Axle Fat Bar (OB-AXL), Valor Fitness. Used for: Weighs 25 lb; measures 84" long with 16" loadable sleeves on each side; 2" diameter shaft; supports up to 500 lbs; sleeves do not rotate; only plates with a 2" center hole will fit. Checked .
- Fat Bar, Sorinex. Used for: Weight 32 lbs; length 84"; diameter 2"; sleeve length 15.75"; bushing/bearing fixed; a non-revolving, axle type bar; spring collars will not work with non-machined bars. Checked .
- Vulcan Axle Bar, Long, Vulcan Strength. Used for: Weight 44 lbs; length 84"; 50 mm (2 inches) diameter; loadable sleeve length 11"; spring collars or any barbell collars will work; made of heavier gauge steel than similar bars and the weight of the bar is higher. Checked .
- Vulcan Axle Bar, Shorty, Vulcan Strength. Used for: Weight 24 lbs; length 60"; diameter 50 mm (2 inches); loadable sleeve length 8". Checked .
- 20kg Axle "Fat" Bar, Fringe Sport. Used for: Weight 44lbs; length 84"; shaft diameter 50mm; sleeve length 15.5"; weight capacity 1,000lbs; the 2 inch diameter includes the shaft; the collars do not rotate, so ground to shoulder is much harder than with an Olympic barbell; standard collars fit. Checked .
- Stubby Axle Barbell, Rackable Shorty Bar, Fringe Sport. Used for: Weight 22 pounds; just under 6 feet long (70 3/4") and 2 inch diameter throughout the entire bar; sleeves 9 inches long; weight capacity 1,000 pounds; axle bar collars do not rotate; use your standard collars; most people cannot close their hand fully around the bar. Checked .
- CERBERUS Strongman Axle Bar, Cerberus Strength. Used for: Weight 25kg; bar length 2200mm; diameter 50mm; loadable sleeve length 440mm; load rating 680.38kg / 1500lb; 1310mm between the collars; fixed sleeves; fits standard Olympic plates. Checked .
- 60mm Thick Bar/Axle, Strength Shop. Used for: Weight approx. 25kg; length approx. 2.1m; 60mm in the product name; sleeves do not revolve; rated to 450kg. Checked .
- Solid Steel Competition Axle, 50mm Thick, 36kg, Strength Shop. Used for: Product name Solid Steel Competition Axle, 50mm Thick, 36kg; weight 36kg; length 2.2m; shaft diameter 50mm; loadable sleeve length 415 mm; rated up to 450 kg; non-revolving sleeves. Checked .
- Axle Bars, Bells of Steel. Used for: Lengths 85.8" (standard) and 61.8" (short); diameter 1.96" / 50mm; loadable sleeve length 15.5" and 8"; max capacity 600lbs / 272.2kg; the sleeves don't spin; Olympic bar collars are compatible with the Hollow Axle Bars, axle collars not required; only the long bar fits correctly in a power rack; no bar weight found in the page text. Checked .
- Compare all bars (Texas 2 inch Fat Axle Power Bar), Texas Power Bars. Used for: Texas 2" Fat Axle Power Bar: 55LBS / 25KG; 86" length (rackable); 50MM (2") shaft diameter; fully rotating sleeves; 15" loadable sleeves; no capacity, plates or collars stated. Checked .
- OB86FG Fat Grip 2" Olympic Bar, Body-Solid. Used for: Bar weight 29 lbs. (also given as 29lb / 13.15kg); bar length 86"; sleeve/grip diameter 2"; sleeve length 15-3/4"; weight capacity 600 lbs.; holds Olympic weights; sleeve rotation not stated. Checked .
- National Records (record rules for each event), Strongman Corporation. Used for: Axle diameters from 1.9 to 2.5 inches may be used for the 2 inch axle clean and press (clean once, press for reps) and the max axle deadlift listed under retired records; for the 2 inch max axle clean and press and the 2 inch axle clean and press (clean and press each rep) the axle must be from IronMind; lifting straps are in the retired axle deadlift record's allowed equipment; no bar weight stated. Checked .
- Axle double overhand deadlift: rules and world records, IronMind. Used for: A genuine IronMind axle must be used with full-sized plates of the standard IWF/IPF diameter (450 mm); plates must be calibrated or weighed on a proven scale; double overhand grip; no grip aid other than chalk is allowed; the page states no axle diameter or weight. Checked .
- USAWA Official Rulebook, 13th Edition (August 29, 2024), United States All-Round Weightlifting Association. Used for: Section VI Equipment, rule 23, the 2 inch bar: minimum diameter 1.9 inches; may be a pipe or a solid steel shaft; no rotation to the sleeves; 51 to 58 inches between the inside collars; total length not less than 7 feet; no knurling; the weight of the bar must be clearly marked. Rule 18: the weights of the collars are included in the total weight. Checked .
- How we measure, BASALT. Used for: Signature Fitness 1 inch bars: about 12.4 lb (5 ft), 14.5 lb (6 ft) and 17.9 lb (7 ft), our preliminary check, tape and bathroom scale, 2 Oct 2026, not a Ledger entry. Checked .